2022 Nissan Murano Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2022 Nissan Murano — TOPLINE CRD41.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2022 Nissan Murano, from KING ENGINE BEARINGS and TOPLINE.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6775XP.

The Standard Replacement section lists 2 options from KING ENGINE BEARINGS and TOPLINE — built to original-equipment specification. KING ENGINE BEARINGS CR6775CP is listed in this group.

Listed part numbers: KING ENGINE BEARINGS CR6775XP, KING ENGINE BEARINGS CR6775XPX and KING ENGINE BEARINGS CR6775CP, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2022 Nissan Murano, from AJUSA, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: AJUSA 54270200, MAHLE / CLEVITE CS54587 and TOPLINE CBSD34.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2022 Nissan Murano come from 2 brands — KING ENGINE BEARINGS and TOPLINE. The "Popular" part is TOPLINE TWD34.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB4058XPX is listed in this group.

Standard Replacement: 3 parts, from TOPLINE and KING ENGINE BEARINGS. A representative part number is TOPLINE TWD34.

This group includes TOPLINE TWD34, KING ENGINE BEARINGS MB4058XPX and KING ENGINE BEARINGS MB4058XP and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts for the 2022 Nissan Murano come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 15092900, AJUSA 71008800 and MAHLE / CLEVITE 67764.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts are listed for the 2022 Nissan Murano, from AJUSA, BECK/ARNLEY, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 81047800, BECK/ARNLEY 0161026 and MAHLE / CLEVITE GS33612 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2022 Nissan Murano, from APEX, AJUSA and MAHLE / CLEVITE. APEX AHG562L carries the "Popular" badge.

Part numbers include APEX AHG562L, APEX AHG562R and AJUSA 10181300, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2022 Nissan Murano, from AJUSA, MAHLE / CLEVITE and TOPLINE.

Part numbers include AJUSA 52662300, MAHLE / CLEVITE HS54587B and TOPLINE HSD41A.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2022 Nissan Murano, from TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO NI1228165 and TECHPRO NI1228166, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2022 Nissan Murano, from AJUSA and TOPLINE.

This group includes AJUSA 50590200 and TOPLINE CGSD41A.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2022 Nissan Murano come from 2 brands — SBI and TOPLINE.

Part numbers include SBI 13221 and TOPLINE EVD41HRL.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2022 Nissan Murano — DAYCO PB1682N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2022 Nissan Murano, from AJUSA, BECK/ARNLEY, FEL-PRO and 1 other brand.

Part numbers include AJUSA 13261900, BECK/ARNLEY 0376177 and FEL-PRO MS97143, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2022 Nissan Murano, from DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Listed part numbers: DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 2022 Nissan Murano come from 3 brands — AJUSA, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: AJUSA 01291300, FEL-PRO MS97220 and MAHLE / CLEVITE MS19419.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE IVD41HRL.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 2022 Nissan Murano come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand. The "Popular" part is SKP SKM9808.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SKM9808 is listed in this group.

Standard Replacement: 11 parts, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. A representative part number is ANCHOR 9808.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2022 Nissan Murano come from ANCHOR.

This group includes ANCHOR 300211 and ANCHOR 300307.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

35 Oil parts for the 2022 Nissan Murano come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 28 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCK78.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 Nissan Murano — MAHLE / CLEVITE B33344.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: AUTOTECNICA NI1421464.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2022 Nissan Murano come from 4 brands — DORMAN, BECK/ARNLEY, ENGINETECH and 1 other brand. The "Popular" part is DORMAN 090038.

Part numbers include DORMAN 090038, BECK/ARNLEY 0160116 and DORMAN 090049, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2022 Nissan Murano, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge.

This group includes DORMAN 097134, AJUSA 01140600 and APEX ADP1904 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2022 Nissan Murano come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Part numbers include CALORSTAT OC2316, GATES 31115 and MOTORAD MO107, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2022 Nissan Murano come from 14 brands — VARIOUS MFR, BOSCH, WIX and 11 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section: 7 options from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 9 parts, from BOSCH, WIX, ACDELCO and 6 other brands. A representative part number is BOSCH 3300.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2022 Nissan Murano, from DORMAN, SKP, SPECTRA PREMIUM and 1 other brand.

Listed part numbers: DORMAN 264505, SKP SK264465 and SPECTRA PREMIUM NSP24A, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 2022 Nissan Murano come from 3 brands — MAHLE / CLEVITE, AJUSA and VICTOR REINZ.

Part numbers include AJUSA 59010400, MAHLE / CLEVITE OS32250 and MAHLE / CLEVITE OS32249, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: TOPLINE OPD41M.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2022 Nissan Murano — ENGINETECH K16016P.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: TOPLINE PBD34.

This table covers the Thrust washers. Read more

This group shows a single part: KING ENGINE BEARINGS TW271AM.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2022 Nissan Murano, from MELLING, S.A. GEAR and CLOYES. MELLING 721 carries the "Popular" badge.

This group includes MELLING 721, CLOYES C730F and MELLING 730F and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts for the 2022 Nissan Murano come from 4 brands — S.A. GEAR, INA, MELLING and 1 other brand. The "Popular" part is S.A. GEAR 76280S.

The Economy section: 2 options from S.A. GEAR. S.A. GEAR 76280S is listed in this group.

Standard Replacement: 3 parts, from INA, MELLING and TOPLINE. A representative part number is INA ZC90730SX.

Part numbers include S.A. GEAR 76280S, S.A. GEAR 76280SW and INA ZC90730SX, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2022 Nissan Murano, from S.A. GEAR and MELLING. S.A. GEAR 91147 carries the "Popular" badge.

Part numbers include S.A. GEAR 91147, MELLING BG5594 and MELLING BG7067, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2022 Nissan Murano come from 2 brands — S.A. GEAR and MELLING. The "Popular" part is S.A. GEAR 9441.

Part numbers include S.A. GEAR 9441, S.A. GEAR 91009 and MELLING BT5441, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 2022 Nissan Murano come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE B33343, MAHLE / CLEVITE B33342 and MAHLE / CLEVITE JV5276.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2022 Nissan Murano come from 2 brands — MAHLE / CLEVITE and SKF.

This group includes MAHLE / CLEVITE 67689 and SKF 18857.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: MELLING S1221.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts are listed for the 2022 Nissan Murano, from ANCHOR, DEA / MARMON RIDE CONTROL and SKP. SKP SKM9747 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9747.

The Standard Replacement section: 4 options from ANCHOR and DEA / MARMON RIDE CONTROL. ANCHOR 9747 is listed in this group.

This group includes SKP SKM9747, ANCHOR 9747 and ANCHOR 9551 and the remaining parts above.

This table covers the Valve covers. Read more

5 Valve Cover parts are listed for the 2022 Nissan Murano, from APEX, DORMAN and ACKOJA. APEX VCS528R carries the "Popular" badge.

This group includes APEX VCS528R, ACKOJA A380699 and APEX VCS528L and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Valve Cover Gasket parts for the 2022 Nissan Murano come from 5 brands — APEX, AJUSA, BECK/ARNLEY and 2 other brands. The "Popular" part is APEX AVC562.

This group includes APEX AVC562, FEL-PRO VS50770R and AJUSA 56041300 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 2022 Nissan Murano come from 2 brands — SBI and TOPLINE.

Listed part numbers: SBI 1408190, SBI 1408217 and TOPLINE EVGD30, plus the other parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2022 Nissan Murano, from MELLING and SBI.

Part numbers include MELLING VL730 and SBI 1211064.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2022 Nissan Murano come from 5 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO SS72821.

This group includes FEL-PRO SS72821, MAHLE / CLEVITE SS45601A and AJUSA 12012100 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

9 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2022 Nissan Murano come from 7 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS, DORMAN and 4 other brands. The "Popular" part is DORMAN 916725.

The Economy section: 4 options from HOLSTEIN, DORMAN and GATES. DORMAN 916725 is listed in this group.

Standard Replacement: 5 parts, from STANDARD MOTOR PRODUCTS, BECK/ARNLEY, CLOYES and 1 other brand. A representative part number is STANDARD MOTOR PRODUCTS VVT377.

Part numbers include DORMAN 916725, GATES VVS247 and HOLSTEIN 2VTS0279, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: ACKOJA A380600.