2005 Toyota Camry Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2005 Toyota Camry — SEALED POWER 1934M.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE CBTO45.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

8 Camshaft Repair Sleeve parts are listed for the 2005 Toyota Camry, from BCA, NATIONAL, WJB / INMOTION PARTS and 2 other brands.

Listed part numbers: BCA NS99139, BCA NS99147 and NATIONAL 99139, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Camshaft Seal parts are listed for the 2005 Toyota Camry, from VICTOR REINZ, NATIONAL, WJB / INMOTION PARTS and 10 other brands. MAHLE / CLEVITE 66905 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2005 Toyota Camry — BECK/ARNLEY 0396555.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRTO44.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts for the 2005 Toyota Camry come from 6 brands — MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. The "Popular" part is ENGINETECH BB1001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts for the 2005 Toyota Camry come from 8 brands — APEX, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is APEX ACS8061.

This table covers the crankshafts that turn piston motion into rotation. Read more

3 Crankshaft parts for the 2005 Toyota Camry come from 3 brands — CRANKSHAFT REBUILDERS, ENGINETECH and TOPLINE.

The Economy section lists 1 option from CRANKSHAFT REBUILDERS — the catalog's value-priced group. CRANKSHAFT REBUILDERS 32630 is listed in this group.

In the Standard Replacement grade, ENGINETECH and TOPLINE supply 2 parts: built to original-equipment specification. A representative part number is ENGINETECH 965900.

Listed part numbers: CRANKSHAFT REBUILDERS 32630, ENGINETECH 965900 and TOPLINE CSTO44.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Crankshaft Main Bearing parts are listed for the 2005 Toyota Camry, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1002 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: CORTECO 49442327.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

10 Crankshaft Repair Sleeve parts are listed for the 2005 Toyota Camry, from NATIONAL, SKF, SCHAEFFLER and 3 other brands. NATIONAL 99147 carries the "Popular" badge.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

42 Crankshaft Seal parts are listed for the 2005 Toyota Camry, from ELRING, FEL-PRO, TIMKEN and 11 other brands. DAYCO SK0008 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the cylinder heads that close the top of the block. Read more

3 Cylinder Head parts are listed for the 2005 Toyota Camry, from CYLINDER HEAD EXPRESS and ENGINETECH.

This group includes CYLINDER HEAD EXPRESS CI1209B, CYLINDER HEAD EXPRESS CI1209L and ENGINETECH CH1125R.

This table covers the bolts that clamp the cylinder head to the block. Read more

18 Cylinder Head Bolt parts for the 2005 Toyota Camry come from 11 brands — ENGINETECH, FEL-PRO, AJUSA and 8 other brands. The "Popular" part is ENGINETECH HB174.

This table covers the Cylinder Head Bolt washers. Read more

3 Cylinder Head Bolt Washer parts for the 2005 Toyota Camry come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO ES72899, MAHLE / CLEVITE GS33354 and VICTOR REINZ 161001001.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

29 Cylinder Head Gasket parts for the 2005 Toyota Camry come from 10 brands — FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 7 other brands. The "Popular" part is FEL-PRO 26232PT. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

28 Cylinder Head Gasket Set parts for the 2005 Toyota Camry come from 12 brands — ENGINETECH, FEL-PRO, ITM ENGINE COMPONENTS and 9 other brands. The "Popular" part is ENGINETECH TO24HSG. A list this long means Cylinder Head Gasket Set applications vary by configuration — the notes carry the qualifiers.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2005 Toyota Camry — DORMAN 565100.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302143.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

This group shows a single part: MELLING CSL358F.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2005 Toyota Camry.

Part numbers include KAT'S HEATERS 11813 and KAT'S HEATERS 11414.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2005 Toyota Camry come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO TO1228107 and TECHPRO TO1228106, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts for the 2005 Toyota Camry come from 7 brands — ENGINETECH, ELRING, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is ENGINETECH TO24K1.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

13 Exhaust Valve parts are listed for the 2005 Toyota Camry, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 4 other brands. ENGINETECH EM4391 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts for the 2005 Toyota Camry come from 6 brands — SKP, ATP, DAYCO and 3 other brands. The "Popular" part is SKP SK594198.

The Economy section: 2 options from SKP. SKP SK594198 is listed in this group.

Standard Replacement: 7 parts, from ATP, DAYCO, PIONEER and 1 other brand. A representative part number is ULTRA-POWER 594198.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2005 Toyota Camry — ARP 1032801.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

6 Intake Manifold parts are listed for the 2005 Toyota Camry, from ACKOJA, DORMAN, ATP and 2 other brands. DORMAN 615565 carries the "Popular" badge.

Listed part numbers: DORMAN 615565, ACKOJA A700951 and ACKOJA A700950, plus the other parts above.