2005 Toyota Highlander Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2005 Toyota Highlander — SEALED POWER 1934M.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE CBTO45.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99139, NATIONAL 99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Camshaft Seal parts are listed for the 2005 Toyota Highlander, from VICTOR REINZ, WJB / INMOTION PARTS, AUTO EXTRA and 4 other brands. VICTOR REINZ 815325600 carries the "Popular" badge.

Listed part numbers: VICTOR REINZ 815325600, WJB / INMOTION PARTS WS1987 and AUTO EXTRA 1987, plus the other parts above.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRTO44.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts for the 2005 Toyota Highlander come from 6 brands — MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. The "Popular" part is ENGINETECH BB1001.

Listed part numbers: ENGINETECH BB1001, MAHLE / CLEVITE CB1835A4 and ITM ENGINE COMPONENTS 4B9559, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2005 Toyota Highlander come from 6 brands — APEX, ENGINETECH, AJUSA and 3 other brands. The "Popular" part is APEX ACS8061.

This group includes APEX ACS8061, ENGINETECH TO24CSE and AJUSA 54171100 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

3 Crankshaft parts for the 2005 Toyota Highlander come from 3 brands — CRANKSHAFT REBUILDERS, ENGINETECH and TOPLINE.

The Economy section lists 1 option from CRANKSHAFT REBUILDERS — the catalog's value-priced group. CRANKSHAFT REBUILDERS 32630 is listed in this group.

In the Standard Replacement grade, ENGINETECH and TOPLINE supply 2 parts: built to original-equipment specification. A representative part number is ENGINETECH 965900.

Part numbers include CRANKSHAFT REBUILDERS 32630, ENGINETECH 965900 and TOPLINE CSTO44.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2005 Toyota Highlander, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1002 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1002, MAHLE / CLEVITE MS2243A and ITM ENGINE COMPONENTS 5M9533, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2005 Toyota Highlander, from NATIONAL, WJB / INMOTION PARTS, TIMKEN and 2 other brands. NATIONAL 99147 carries the "Popular" badge.

This group includes NATIONAL 99147, TIMKEN KWK99166 and BCA NS99147 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2005 Toyota Highlander, from ELRING, VICTOR REINZ, AJUSA and 9 other brands. AJUSA 15015300 carries the "Popular" badge.

This table covers the cylinder heads that close the top of the block. Read more

3 Cylinder Head parts are listed for the 2005 Toyota Highlander, from CYLINDER HEAD EXPRESS and ENGINETECH.

Listed part numbers: CYLINDER HEAD EXPRESS CI1209B, CYLINDER HEAD EXPRESS CI1209L and ENGINETECH CH1125R.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 2005 Toyota Highlander come from 9 brands — ENGINETECH, FEL-PRO, AJUSA and 6 other brands. The "Popular" part is ENGINETECH HB174.

Part numbers include ENGINETECH HB174, FEL-PRO ES71183 and AJUSA 81032200, among others listed above.

This table covers the Cylinder Head Bolt washers. Read more

3 Cylinder Head Bolt Washer parts for the 2005 Toyota Highlander come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO ES72899, MAHLE / CLEVITE GS33354 and VICTOR REINZ 161001001.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts for the 2005 Toyota Highlander come from 8 brands — FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 5 other brands. The "Popular" part is FEL-PRO 26232PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts for the 2005 Toyota Highlander come from 12 brands — ENGINETECH, FEL-PRO, ULTRA-POWER and 9 other brands. The "Popular" part is ENGINETECH TO24HSG.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302143.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2005 Toyota Highlander — KAT'S HEATERS 11813.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO TO1228142.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 2005 Toyota Highlander come from 7 brands — ENGINETECH, VICTOR REINZ, AJUSA and 4 other brands. The "Popular" part is ENGINETECH TO24K1.

Part numbers include ENGINETECH TO24K1, VICTOR REINZ 015351501 and AJUSA 50221400, among others listed above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCTO24P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2005 Toyota Highlander, from ENGINETECH, SKP, ITM ENGINE COMPONENTS and 3 other brands. ENGINETECH EM4391 carries the "Popular" badge.

Part numbers include ENGINETECH EM4391, SKP SKV4690 and ITM ENGINE COMPONENTS RX9606, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2005 Toyota Highlander come from 6 brands — SKP, ULTRA-POWER, ATP and 3 other brands. The "Popular" part is SKP SK594198.

The Economy section: 1 option from SKP. SKP SK594198 is listed in this group.

Standard Replacement: 4 parts, from ULTRA-POWER, ATP, DAYCO and 1 other brand. A representative part number is ULTRA-POWER 594198.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: SKP SK594198, ULTRA-POWER 594198 and ATP 102183, plus the other parts above.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2005 Toyota Highlander — ARP 1032801.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2005 Toyota Highlander come from 8 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 5 other brands. The "Popular" part is FEL-PRO MS94295.

This group includes FEL-PRO MS94295, MAHLE / CLEVITE MS19247 and AJUSA 13169100 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2005 Toyota Highlander — ELRING 299150.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2005 Toyota Highlander, from SKP, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. SKP SKV4689 carries the "Popular" badge.

Listed part numbers: SKP SKV4689, ENGINETECH IM4390 and ITM ENGINE COMPONENTS RV9956, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2005 Toyota Highlander, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 4 other brands. SKP SKM9212 carries the "Popular" badge.

Economy: 2 parts, from SKP and ULTRA-POWER. A representative part number is SKP SKM9212.

The Standard Replacement section: 14 options from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 9591 is listed in this group.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2005 Toyota Highlander.

This group includes ANCHOR 300439 and ANCHOR 300441.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

46 Oil parts are listed for the 2005 Toyota Highlander, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 34 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2005 Toyota Highlander come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2005 Toyota Highlander — DORMAN 917398.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2005 Toyota Highlander, from DORMAN, ELRING, BECK/ARNLEY and 1 other brand. DORMAN 090038 carries the "Popular" badge.

Part numbers include DORMAN 090038, DORMAN 090049 and BECK/ARNLEY 0160116, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Drain Plug Gasket parts for the 2005 Toyota Highlander come from 8 brands — DORMAN, MAHLE / CLEVITE, APEX and 5 other brands. The "Popular" part is DORMAN 095156.

Listed part numbers: DORMAN 095156, MAHLE / CLEVITE 2051 and APEX ADP1902, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

7 Oil Filler Cap parts are listed for the 2005 Toyota Highlander, from CALORSTAT, DORMAN, STANT and 3 other brands. DORMAN 84111 carries the "Popular" badge.

Listed part numbers: DORMAN 84111, STANT 10135 and CALORSTAT OC2326, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2005 Toyota Highlander, from VARIOUS MFR, FRAM, WIX and 10 other brands. MOBIL M1103A carries the "Popular" badge.

Economy: 6 parts, from FRAM, VARIOUS MFR, FVP and 1 other brand. A representative part number is FRAM FF4386.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1103A.

The Standard Replacement section: 9 options from ACDELCO, BOSCH, WIX and 6 other brands. ACDELCO PF1233 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts for the 2005 Toyota Highlander come from 7 brands — SKP, SPECTRA PREMIUM, ATP and 4 other brands. The "Popular" part is SKP SK264317.

Listed part numbers: SKP SK264317, SPECTRA PREMIUM TOP24A and ATP 103325, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2005 Toyota Highlander, from VICTOR REINZ, APEX, FEL-PRO and 1 other brand. VICTOR REINZ 703141410 carries the "Popular" badge.

This group includes VICTOR REINZ 703141410, APEX AOP861 and FEL-PRO OS30713 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

6 Oil Pump parts are listed for the 2005 Toyota Highlander, from SKP, AISIN, ENGINETECH and 3 other brands. AISIN OPT803 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKOM373.

The Standard Replacement section: 5 options from AISIN, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. AISIN OPT803 is listed in this group.

Listed part numbers: AISIN OPT803, SKP SKOM373 and ENGINETECH EP044, plus the other parts above.

This table covers the chains that drive the oil pump. Read more

9 Oil Pump Chain parts for the 2005 Toyota Highlander come from 6 brands — S.A. GEAR, INA, PREFERRED COMPONENTS INC and 3 other brands. The "Popular" part is S.A. GEAR RC1036.

In the Chain Only grade, S.A. GEAR and INA supply 2 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is S.A. GEAR RC1036.

The Economy section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC C1001 is listed in this group.

The Kit section lists 4 options from ENGINETECH, INA, PREFERRED COMPONENTS INC and 1 other brand — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. ENGINETECH TS1001 is listed in this group.

Standard Replacement: 2 parts, from MELLING and CLOYES. A representative part number is MELLING 751.

Listed part numbers: S.A. GEAR RC1036, INA ZCC751 and PREFERRED COMPONENTS INC C1001, plus the other parts above.

This table covers the Oil Pump Chain guides. Read more

5 Oil Pump Chain Guide parts for the 2005 Toyota Highlander come from 5 brands — CLOYES, FVP, MELLING and 2 other brands. The "Popular" part is CLOYES 95526.

This group includes CLOYES 95526 and MELLING BG5526 and the remaining parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Oil Pump Chain Tensioner parts are listed for the 2005 Toyota Highlander, from CLOYES, FVP, MELLING and 1 other brand.

Listed part numbers: CLOYES 95520 and MELLING BT5520, plus the other parts above.