2005 Toyota Highlander Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2005 Toyota Highlander come from 3 brands — SCHAEFFLER, SKF and TIMKEN.

Listed part numbers: SCHAEFFLER SS2416, SKF 13725 and TIMKEN 710419.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

20 CV Axle parts for the 2005 Toyota Highlander come from 5 brands — TRAKMOTIVE, GSP, TOP NOTCH and 2 other brands. The "Popular" part is GSP NCV69578.

The Economy section lists 2 options from CARDONE — the catalog's value-priced group. CARDONE 605245 is listed in this group.

In the Heavy Duty grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: rated for severe service. A representative part number is GSP NCV69578XD.

In the Standard Replacement grade, TRAKMOTIVE, APWI, GSP and 1 other brand supply 15 parts: built to original-equipment specification. A representative part number is GSP NCV69578.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2005 Toyota Highlander come from 2 brands — MEVOTECH and BECK/ARNLEY. The "Popular" part is MEVOTECH DX437.

Listed part numbers: MEVOTECH DX437, BECK/ARNLEY 1032892 and BECK/ARNLEY 1032946, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

17 Differential Carrier Bearing / Race parts for the 2005 Toyota Highlander come from 8 brands — SKF, WJB / INMOTION PARTS, SCHAEFFLER and 5 other brands. The "Popular" part is WJB / INMOTION PARTS WTA35.

The Economy section: 3 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA35 is listed in this group.

Standard Replacement: 14 parts, from SKF, SCHAEFFLER, TIMKEN and 4 other brands. A representative part number is ACDELCO A35.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Differential Cover Gasket parts for the 2005 Toyota Highlander come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO RDS27413 and VICTOR REINZ 711552700.

This table covers the bearings and races on the differential pinion. Read more

16 Differential Pinion Bearing / Race parts are listed for the 2005 Toyota Highlander, from WJB / INMOTION PARTS, BCA, SCHAEFFLER and 3 other brands. WJB / INMOTION PARTS WTM86610 carries the "Popular" badge.

Economy: 6 parts, from WJB / INMOTION PARTS and FAMOUS BRAND. A representative part number is WJB / INMOTION PARTS WTM86610.

The Standard Replacement section: 10 options from BCA, SCHAEFFLER, SKF and 1 other brand. BCA NBM86610 is listed in this group.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 2005 Toyota Highlander come from 4 brands — BCA, SCHAEFFLER, SKF and 1 other brand.

Part numbers include BCA NS99147, SCHAEFFLER SR3476 and SKF 99147, among others listed above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts for the 2005 Toyota Highlander come from 5 brands — SKF, BECK/ARNLEY, NATIONAL and 2 other brands. The "Popular" part is SKF 14758.

This group includes SKF 14758, BECK/ARNLEY 0524114 and NATIONAL 710594 and the remaining parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

3 Differential Repair Sleeve parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, TIMKEN and 1 other brand.

This group includes BCA NS710419 and NATIONAL 710419 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2005 Toyota Highlander, from SKP, CARDONE, DORMAN and 2 other brands. SKP SK946164 carries the "Popular" badge.

Listed part numbers: SKP SK946164, CARDONE 655008 and DORMAN 946164, plus the other parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

23 Drive Shaft Center Support Bearing parts are listed for the 2005 Toyota Highlander, from WJB / INMOTION PARTS, SKP, DEA / MARMON RIDE CONTROL and 9 other brands. SKP SK934404 carries the "Popular" badge.

Economy: 11 parts, from WJB / INMOTION PARTS, SKP, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is SKP SK934404.

The Standard Replacement section: 12 options from ANCHOR, BCA, BECK/ARNLEY and 4 other brands. ANCHOR 6082 is listed in this group.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

14 Gear Oil parts for the 2005 Toyota Highlander come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts for the 2005 Toyota Highlander come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section: 7 options from VALVOLINE and MOBIL. MOBIL 104361 is listed in this group.

The SAE 80W-90 section: 7 options from VALVOLINE and LUCAS OIL. LUCAS OIL 10043 is listed in this group.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Housing Extension Seal parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS710319, NATIONAL 710319 and SCHAEFFLER SS3716 and the remaining parts above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts for the 2005 Toyota Highlander come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER BT2050 and SKF BR112.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

One part is listed for the 2005 Toyota Highlander — SKF 99219.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts are listed for the 2005 Toyota Highlander, from NATIONAL, SKF and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710910, SKF 23234 and WJB / INMOTION PARTS WS710910.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Bearing parts are listed for the 2005 Toyota Highlander, from SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER KT708 and SKF BR119.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

5 Transfer Case Output Shaft Repair Sleeve parts for the 2005 Toyota Highlander come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is WJB / INMOTION PARTS WS99134.

Part numbers include WJB / INMOTION PARTS WS99134, BCA NS99134 and BCA NS99145, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Output Shaft Seal parts for the 2005 Toyota Highlander come from 3 brands — NATIONAL, SKF and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 710807.

Part numbers include NATIONAL 710807, SKF 14958 and NATIONAL 710870, among others listed above.

This table covers the U-joints in the driveshaft. Read more

4 Universal Joint parts for the 2005 Toyota Highlander come from 4 brands — FVP, GKN, GMB and 1 other brand.

Listed part numbers: FVP 2200024 and GKN U024, plus the other parts above.