2005 Toyota Highlander Automatic Transmission Parts

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 2005 Toyota Highlander.

Listed part numbers: TRANSGO U140BOOST and TRANSGO U151BOOST.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 2005 Toyota Highlander come from DURA-BOND.

Part numbers include DURA-BOND TK10 and DURA-BOND TK10A.

This table covers the vents on a transmission or axle housing. Read more

One part is listed for the 2005 Toyota Highlander — DORMAN 926811.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

3 Clutch Plate Pack parts for the 2005 Toyota Highlander come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN FRMTOYTA42.

The Steel Plate Pack section lists 2 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMTOYTA42 is listed in this group.

Part numbers include RAYBESTOS POWERTRAIN FRMTOYTA42, RAYBESTOS POWERTRAIN STMTOYTA42 and RAYBESTOS POWERTRAIN STMTOYTA33.

This table covers the related components grouped with this assembly. Read more

3 Components parts for the 2005 Toyota Highlander come from SONNAX.

Part numbers include SONNAX 57917E03K, SONNAX 57917E13K and SONNAX 57917E08K.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

ROSTRA supplies the 3 Conductor Plate parts for the 2005 Toyota Highlander.

Part numbers include ROSTRA 550043, ROSTRA 550044 and ROSTRA 550045.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2005 Toyota Highlander — DORMAN 652531CD.

This table covers the End plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2005 Toyota Highlander — PA CARGO K096.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Extension Housing Seal parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS710319, NATIONAL 710319 and SCHAEFFLER SS3716, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

14 Filter parts for the 2005 Toyota Highlander come from 8 brands — ATP, VAICO, PA CARGO and 5 other brands. The "Popular" part is ATP B224.

The Economy section lists 4 options from ATP, PA CARGO and VARIOUS MFR — the catalog's value-priced group. ATP TF224 is listed in this group.

In the Standard Replacement grade, VAICO, ATP, BECK/ARNLEY and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is ATP B224.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

4 Fluid Cooler parts for the 2005 Toyota Highlander come from 4 brands — DORMAN, SKP, TECHPRO and 1 other brand.

Listed part numbers: DORMAN 918555, SKP SK19124 and TECHPRO TO4050108, plus the other parts above.

This table covers the Fluid Cooler O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: DORMAN 82562.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts are listed for the 2005 Toyota Highlander, from DORMAN, ACKOJA and SPECTRA PREMIUM.

This group includes ACKOJA A700524, DORMAN 265917 and DORMAN 265927 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Fluid Pan Gasket parts for the 2005 Toyota Highlander come from 4 brands — ATP, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes ATP RG75, FEL-PRO TOS18719 and MAHLE / CLEVITE W32838 and the remaining parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Fluid Pump Bushing parts for the 2005 Toyota Highlander come from DURA-BOND.

Part numbers include DURA-BOND 67001TG and DURA-BOND 67001T.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2005 Toyota Highlander, from SCHAEFFLER, SKF and TIMKEN.

This group includes SCHAEFFLER SS6193, SKF 15302 and TIMKEN 710112.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, TIMKEN and 1 other brand.

This group includes BCA NS221207 and NATIONAL 221207 and the remaining parts above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

7 Output Shaft Repair Sleeve parts for the 2005 Toyota Highlander come from 4 brands — NATIONAL, WJB / INMOTION PARTS, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 99157.

Listed part numbers: NATIONAL 99157, WJB / INMOTION PARTS WS99157 and BCA NS99196, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

29 Output Shaft Seal parts for the 2005 Toyota Highlander come from 8 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 5 other brands. The "Popular" part is ATP RO79. A list this long means Output Shaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Pressure Control (EPC) Solenoid parts for the 2005 Toyota Highlander come from 2 brands — ATP and ROSTRA. The "Popular" part is ATP RE9.

Part numbers include ATP RE9, ATP RE37 and ATP RE7, among others listed above.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts are listed for the 2005 Toyota Highlander, from ATP and PIONEER. ATP RM48 carries the "Popular" badge.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 4 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP RM48 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, ATP supplies 1 part: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is ATP OGS102.

Part numbers include ATP RM48, ATP RM50 and ATP RM49, among others listed above.

This table covers the Shift Improvement kits. Read more

4 Shift Improvement Kit parts for the 2005 Toyota Highlander come from 2 brands — SONNAX and TRANSGO.

This group includes SONNAX U140EU241EZIP, SONNAX U151EU250EZIP and TRANSGO SKU140 and the remaining parts above.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

One part is listed for the 2005 Toyota Highlander — SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2005 Toyota Highlander, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS2111 and SKF 4707.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

22 Shift Solenoid parts are listed for the 2005 Toyota Highlander, from ROSTRA, ATP, ACKOJA and 3 other brands. ROSTRA 520379 carries the "Popular" badge.

The Single Solenoid section lists 17 options from ROSTRA, ATP, STANDARD MOTOR PRODUCTS and 2 other brands — grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. ROSTRA 520379 is listed in this group.

The Solenoid Pack / Kit section lists 1 option from ATP — grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. ATP RE64 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the seals at the Side Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Side Cover Seal parts are listed for the 2005 Toyota Highlander, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711095 and WJB / INMOTION PARTS WS711095.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

2 Torque Converter parts for the 2005 Toyota Highlander come from TC REMANUFACTURING.

Part numbers include TC REMANUFACTURING TO429 and TC REMANUFACTURING TO42LS.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Torque Converter Clutch Solenoid parts for the 2005 Toyota Highlander come from 2 brands — WELLS and ROSTRA. The "Popular" part is ROSTRA 520377.

Part numbers include ROSTRA 520377, ROSTRA 520380 and WELLS 2N1160, among others listed above.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

4 Torque Converter Repair Sleeve parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476 and the remaining parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2005 Toyota Highlander, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS223830, NATIONAL 223830 and SCHAEFFLER SS2518, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

20 Transmission Fluid parts for the 2005 Toyota Highlander come from 10 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 7 other brands. The "Popular" part is ACDELCO 109243.

The ATF +4 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. PENTOSIN 1058112 is listed in this group.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the JWS 3309 grade, MOBIL supplies 1 part: grouped under the catalog's "JWS 3309" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 123062.

The Multi-Vehicle section lists 11 options from VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type T-4 (Type T-IV) section lists 3 options from IDEMITSU and AISIN — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. AISIN ATF0T4 is listed in this group.

The ZF Fluid section lists 1 option from ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. ZF 5961308623 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 2005 Toyota Highlander come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts are listed for the 2005 Toyota Highlander, from SKP, WESTAR, ANCHOR and 3 other brands. SKP SKM9165 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9165.

The Standard Replacement section: 5 options from WESTAR, ANCHOR, BECK/ARNLEY and 2 other brands. WESTAR EM9165 is listed in this group.

Listed part numbers: SKP SKM9165, WESTAR EM9165 and ANCHOR 9165, plus the other parts above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

4 Valve Body parts for the 2005 Toyota Highlander come from 2 brands — SONNAX and PA CARGO.

Listed part numbers: PA CARGO TO8620, SONNAX TOY171 and SONNAX TOY172, plus the other parts above.