2013 Toyota Highlander Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2539.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — STANDARD MOTOR PRODUCTS S1028.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

15 ABS Wheel Speed Sensor Connector parts for the 2013 Toyota Highlander come from 7 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER, BECK/ARNLEY and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2825. 6 parts fit every engine; the other 9 are engine-specific.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2815.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2548.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts for the 2013 Toyota Highlander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

This group includes STANDARD MOTOR PRODUCTS S986 and WELLS 1P2653.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Blower Motor Connector parts for the 2013 Toyota Highlander come from STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Part numbers include STANDARD MOTOR PRODUCTS S3204 and STANDARD MOTOR PRODUCTS S3208.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Camshaft Position Sensor Connector parts for the 2013 Toyota Highlander come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 1 is engine-specific.

This group includes DORMAN 645744 and STANDARD MOTOR PRODUCTS S2837.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2808.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1032.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injector Connector parts for the 2013 Toyota Highlander come from 2 brands — GB REMANUFACTURING and STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Listed part numbers: GB REMANUFACTURING 5188 and STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — WELLS 1P4004.

This table covers the harness connectors at the Fuel Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2834.

This table covers the harness connectors at the Headlamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — STANDARD MOTOR PRODUCTS S1536.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

STANDARD MOTOR PRODUCTS supplies the 3 Headlamp Wiring Harness / Connector parts for the 2013 Toyota Highlander. All of them fit every engine offered in the 2013 Highlander.

Part numbers include STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS LWH104 and STANDARD MOTOR PRODUCTS LWH106.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Coil Connector parts for the 2013 Toyota Highlander come from 5 brands — STANDARD MOTOR PRODUCTS, DORMAN, FVP and 2 other brands. The "Popular" part is DORMAN 645940. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Part numbers include DORMAN 645940, STANDARD MOTOR PRODUCTS S2527 and FVP UF487F, among others listed above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Knock / Detonation Sensor Connector parts for the 2013 Toyota Highlander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2328, STANDARD MOTOR PRODUCTS S3091 and WELLS 1P2374, among others listed above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Mass Air Flow (MAF) Sensor Connector parts are listed for the 2013 Toyota Highlander, from STANDARD MOTOR PRODUCTS, ULTRA-POWER and WALKER PRODUCTS. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S1712 and ULTRA-POWER 2701104, plus the other parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — STANDARD MOTOR PRODUCTS S2538.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3147.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2537.

This table covers the harness connectors at the Radiator Fan Resistor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Resistor Connector parts for the 2013 Toyota Highlander come from STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S3175 and STANDARD MOTOR PRODUCTS S3314.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 5 Radio Connector parts for the 2013 Toyota Highlander. METRA AXBUCHT36V carries the "Popular" badge. All of them fit every engine offered in the 2013 Highlander.

Part numbers include METRA AXBUCHT36V, METRA AXSWCHT28 and METRA AXBUCHT1, among others listed above.

This table covers the harness connectors at the Speaker. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — METRA 728104.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts are listed for the 2013 Toyota Highlander, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2549.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Temperature Sender / Sensor Connector parts for the 2013 Toyota Highlander come from 5 brands — WELLS, FOUR SEASONS, ROSTRA and 2 other brands. The "Popular" part is WELLS 1P1562. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

This group includes WELLS 1P1562, FOUR SEASONS 37288 and ROSTRA 610189 and the remaining parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2817.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Trailer Connector parts are listed for the 2013 Toyota Highlander, from CURT and TEKONSHA. All of them fit every engine offered in the 2013 Highlander.

Listed part numbers: CURT 56042, CURT 55245 and CURT 56217, plus the other parts above.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Highlander — STANDARD MOTOR PRODUCTS S3169.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Purge Valve / Solenoid Connector parts for the 2013 Toyota Highlander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Vent Valve / Solenoid Connector parts for the 2013 Toyota Highlander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 2 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2846.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Variable Valve Timing (VVT) Solenoid Connector parts for the 2013 Toyota Highlander come from 4 brands — WELLS, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include ROSTRA 610158, STANDARD MOTOR PRODUCTS S1716 and WALKER PRODUCTS 2701102, among others listed above.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3320.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1423.