2013 Toyota Highlander Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2013 Toyota Highlander — TOPLINE CRTO49.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 2013 Toyota Highlander, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB1035 carries the "Popular" badge.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts are listed for the 2013 Toyota Highlander, from AJUSA, FEL-PRO, APEX and 5 other brands. FEL-PRO CS26562 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2013 Toyota Highlander come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1046.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2013 Toyota Highlander come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

Part numbers include BCA NS99166, NATIONAL 99166 and SKF 99360, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

44 Crankshaft Seal parts for the 2013 Toyota Highlander come from 13 brands — VICTOR REINZ, ELRING, FEL-PRO and 10 other brands. The "Popular" part is AJUSA 15019600. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts are listed for the 2013 Toyota Highlander, from APEX, ENGINETECH, FEL-PRO and 6 other brands. APEX AHB876 carries the "Popular" badge.

This table covers the Cylinder Head Bolt washers. Read more

3 Cylinder Head Bolt Washer parts are listed for the 2013 Toyota Highlander, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: FEL-PRO ES72899, MAHLE / CLEVITE GS33354 and VICTOR REINZ 161001001.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

24 Cylinder Head Gasket parts are listed for the 2013 Toyota Highlander, from AJUSA, APEX, FEL-PRO and 5 other brands. APEX AHG882 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

22 Cylinder Head Gasket Set parts are listed for the 2013 Toyota Highlander, from FEL-PRO, ENGINETECH, AJUSA and 7 other brands. APEX AHS8082 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2013 Toyota Highlander come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

TECHPRO supplies the 6 Engine Cover parts for the 2013 Toyota Highlander. TECHPRO TO1228199 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: TECHPRO TO1228199, TECHPRO TO1228189 and TECHPRO TO1228183, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2013 Toyota Highlander, from AJUSA, TOPLINE, ELRING and 3 other brands.

This group includes AJUSA 50322800, AJUSA 50282800 and AJUSA 50369500 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2013 Toyota Highlander come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3087.

Listed part numbers: MELLING V3087, ENGINETECH EM4471 and ENGINETECH EM4457, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts are listed for the 2013 Toyota Highlander, from SKP, ATP, DAYCO and 4 other brands. SKP SK594403 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK594403.

The Standard Replacement section lists 7 options from ATP, DAYCO, ULTRA-POWER and 2 other brands — built to original-equipment specification. ULTRA-POWER 594304 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ACKOJA A700947.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

17 Intake Manifold Gasket parts are listed for the 2013 Toyota Highlander, from VICTOR REINZ, FEL-PRO, ELRING and 5 other brands. APEX AMS8820 carries the "Popular" badge.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2013 Toyota Highlander — STANDARD MOTOR PRODUCTS IMRC15.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Plenum Gasket parts for the 2013 Toyota Highlander come from 6 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO MS96786.

This group includes FEL-PRO MS96786, MAHLE / CLEVITE MS19676 and APEX AMS8730 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Intake Valve parts for the 2013 Toyota Highlander come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3086.

Listed part numbers: MELLING V3086, ENGINETECH IM4470 and ENGINETECH IM4456, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

28 Motor Mount parts for the 2013 Toyota Highlander come from 6 brands — DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 3 other brands. The "Popular" part is ANCHOR 9694. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 2 other brands.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts for the 2013 Toyota Highlander come from 2 brands — ANCHOR and WESTAR.

This group includes ANCHOR 300224, ANCHOR 300416 and ANCHOR 300417 and the remaining parts above.