2020 Toyota Sequoia Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 4WD Actuator parts are listed for the 2020 Toyota Sequoia, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TCA104 and WELLS 1S15514.

This table covers the seals at the Axle Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Toyota Sequoia — TIMKEN 710595.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts for the 2020 Toyota Sequoia come from 3 brands — SKF, TIMKEN and SCHAEFFLER. The "Popular" part is SKF 18478.

Listed part numbers: SKF 18478, SCHAEFFLER SS2877 and SKF 18195A, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

10 CV Axle parts for the 2020 Toyota Sequoia come from 5 brands — GSP, TRAKMOTIVE, TOP NOTCH and 2 other brands. The "Popular" part is APWI TO8363.

The Economy section lists 1 option from CARDONE — the catalog's value-priced group. CARDONE 605252 is listed in this group.

In the Heavy Duty grade, GSP and TRAKMOTIVE supply 2 parts: rated for severe service. A representative part number is GSP NCV69164XD.

In the Specialty - For Lifted Vehicles grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is GSP NCV69164XDP.

In the Standard Replacement grade, APWI, TOP NOTCH, GSP and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is APWI TO8363.

This table covers the CV Intermediate shafts. Read more

One part is listed for the 2020 Toyota Sequoia — TRAKMOTIVE TO3512.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

2 CV Joint Boot parts for the 2020 Toyota Sequoia come from BECK/ARNLEY.

This group includes BECK/ARNLEY 1033133 and BECK/ARNLEY 1032872.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: DORMAN 600420.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2020 Toyota Sequoia — BECK/ARNLEY 1042457.

This table covers the bearings and races on the differential pinion. Read more

SKF supplies both parts for the 2020 Toyota Sequoia.

This group includes SKF BR4090 and SKF BR911.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 2020 Toyota Sequoia come from 5 brands — SKF, WJB / INMOTION PARTS, TIMKEN and 2 other brands. The "Popular" part is SKF 18168A.

This group includes SKF 18168A, TIMKEN 225275 and NATIONAL 711186 and the remaining parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

5 Differential Rebuild Kit parts are listed for the 2020 Toyota Sequoia, from BCA, MOTIVE GEAR and LUK. BCA NBDRK381MK carries the "Popular" badge.

In the Master Kit grade, BCA and MOTIVE GEAR supply 2 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is BCA NBDRK381MK.

The Standard Kit section lists 2 options from BCA and LUK — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. BCA NBDRK381 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: BCA NBDRK381MK, MOTIVE GEAR RT95RMK and BCA NBDRK381, plus the other parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2020 Toyota Sequoia, from DORMAN, GSP, TOP NOTCH and 1 other brand. DORMAN 986149 carries the "Popular" badge.

This group includes DORMAN 986149, DORMAN 938339 and GSP PS901763 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

3 Gear Oil parts for the 2020 Toyota Sequoia come from 2 brands — VALVOLINE and IDEMITSU.

This group includes IDEMITSU 30305024750, VALVOLINE 915052 and VALVOLINE 915053.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts for the 2020 Toyota Sequoia come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

One part is listed for the 2020 Toyota Sequoia — DORMAN 600471.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Toyota Sequoia — SCHAEFFLER 6208C3.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS6637.

This table covers the U-joints in the driveshaft. Read more

15 Universal Joint parts for the 2020 Toyota Sequoia come from 3 brands — MOOG, ACDELCO and GMB. The "Popular" part is MOOG 270.

Heavy Duty: 7 parts, from MOOG and ACDELCO. A representative part number is MOOG 270.

Standard Replacement: 8 parts, from MOOG, ACDELCO and GMB. A representative part number is MOOG 354.