This page lists 8 electrical connector parts for the 2011 VPG MV-1, across 4 part types, covering the 4.6L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.
The connector system on the 2011 VPG MV-1 supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. The largest groups are Ignition Coil Connector (5 parts), Headlamp Wiring Harness / Connector (1 part) and Trailer Wire Converter (1 part). The other 1 part type covers the remaining 1 part.
The 2011 VPG MV-1 came with a single engine, the 4.6L V8, and every part is verified against it.
5 brands supply electrical connector parts for the 2011 VPG MV-1, led by STANDARD MOTOR PRODUCTS (3 parts), ROSTRA (2 parts) and HOLSTEIN (1 part), plus 2 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2011 VPG MV-1. 1 part has it: STANDARD MOTOR PRODUCTS HP4710 (Ignition Coil Connector). Each part number opens a page with every vehicle that part fits.
Headlamp Wiring Harness / Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LWH109 | 🇺🇸 US | Blue StreakHigh Temperature | View on Amazon |
This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape.
One part is listed for the 2011 VPG MV-1 — STANDARD MOTOR PRODUCTS LWH109.
Ignition Coil Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | HP4710 | 🇺🇸 US | HandypackHarness Length | View on Amazon |
| HOLSTEIN | 2HAR0062 | 🇺🇸 US | View on Amazon | |
| ROSTRA | 610008 | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS | S819 | 🇺🇸 US | Connector Shape: RectangleHarness Length | View on Amazon |
| WELLS | 1P1483 | 🇺🇸 US | Terminal Gender: Female | View on Amazon |
This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
5 Ignition Coil Connector parts for the 2011 VPG MV-1 come from 4 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, ROSTRA and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP4710.
Listed part numbers: STANDARD MOTOR PRODUCTS HP4710, HOLSTEIN 2HAR0062 and ROSTRA 610008, plus the other parts above.
Trailer Wire Converter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CURT | 55151 | 🇺🇸 US | Wiring Kit | View on Amazon |
This table covers the Trailer Wire converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering.
One part is listed for the 2011 VPG MV-1 — CURT 55151.
Transmission-Automatic Wiring Harness / Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROSTRA | 3500167 | 🇺🇸 US | Wire Harness & Connector | View on Amazon |
This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape.
One part is listed for the 2011 VPG MV-1 — ROSTRA 3500167.
Buying Electrical Connector Parts for a 2011 VPG MV-1
On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.
- Confirm you have the 4.6L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil Connector and Headlamp Wiring Harness / Connector .
Frequently Asked Questions
How many electrical connector parts fit the 2011 VPG MV-1?
Our catalog currently lists 8 electrical connector parts for the 2011 VPG MV-1 across 4 subcategories and 5 brands, covering the 4.6L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of electrical connector problems on a 2011 VPG MV-1?
Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 VPG MV-1 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 VPG MV-1?
Every part on this page is matched to the 4.6L V8 engine. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 VPG MV-1
Electrical Connector Parts for Other VPG MV-1 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.