2011 VPG MV-1 Ignition Parts

Engine:
4.6L V8

The 2011 VPG MV-1 has 21 ignition parts with verified fitment on this page — 2 part types and 11 brands, covering the 4.6L V8 engine. Each part includes a manufacturer part number and application notes.

On the 2011 VPG MV-1, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 21 listed parts are Spark Plug (12 parts) and Ignition Coil (9 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
SPECTRA PREMIUM Popular C500
🇺🇸 US
Contains 1 Units
Fitment notes — SPECTRA PREMIUM C500
Contains 1 Units
FrontIgnition Coil Mounts to Cylinder Head
View on
Amazon
STANDARD MOTOR PRODUCTS Popular FD503T
🇺🇸 US
T-Series
View on
Amazon
FVP FD503F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0119
🇺🇸 US
View on
Amazon
SKP SKIC001
🇺🇸 US
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS FD503
🇺🇸 US
Blue Streak
View on
Amazon
STANDARD MOTOR PRODUCTS FD503K8
🇺🇸 US
Blue Streak
Fitment notes — STANDARD MOTOR PRODUCTS FD503K8
Blue Streak
For COP systems
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS COP9
🇺🇸 US
with High Temp Rated Gray Silicone Extended Life Boot
Fitment notes — UNITED MOTOR PRODUCTS COP9
with High Temp Rated Gray Silicone Extended Life Boot
Bent Coil
View on
Amazon
WELLS 5C1412
🇺🇸 US
Requires External Resistor: YES
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.034", 0.040", 0.044", 0.045", 0.050" and 0.054". Replacement brands in this table include CHAMPION, ACDELCO and BOSCH.

Copper / Nickel

Brand Part Number Markets Notes Buy
CHAMPION Popular 401
🇺🇸 US
Copper PlusPre-Set Gap: 0.04"
Fitment notes — CHAMPION 401
Copper PlusPre-Set Gap: 0.04"
OE-Recommended Gap: 0.044"
View on
Amazon
AUTOLITE 103
🇺🇸 US
Copper ResistorPre-Set Gap: 0.050"
Fitment notes — AUTOLITE 103
Copper ResistorPre-Set Gap: 0.050"
Fits:
GasGap .044 (In) 1.1 (mm)
or:
CNGGap .034 (In) 0.9 (mm)
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Popular 41962
🇺🇸 US 🇨🇦 CA
GM Original EquipmentDouble Platinum
Fitment notes — ACDELCO 41962
GM Original EquipmentDouble PlatinumPre-Set Gap: 0.040"
OE-Recommended Gap: 0.040 (in)
View on
Amazon
BOSCH 8113
🇺🇸 US
OE Fine Wire Double PlatinumPre-Set Gap: 0.044"
Fitment notes — BOSCH 8113
OE Fine Wire Double PlatinumPre-Set Gap: 0.044"
Original Equipment is Platinum
View on
Amazon
CHAMPION 7963
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.05"
Fitment notes — CHAMPION 7963
Double Platinum PowerPre-Set Gap: 0.05"
OE-Recommended Gap: 0.044"
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
BOSCH 9608
🇺🇸 US
OE Fine Wire Double IridiumPre-Set Gap: 0.044"
Fitment notes — BOSCH 9608
OE Fine Wire Double IridiumPre-Set Gap: 0.044"
Original Equipment is Platinum
View on
Amazon
CHAMPION 9204
🇺🇸 US
IridiumPre-Set Gap: 0.045"
Fitment notes — CHAMPION 9204
IridiumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.044"
View on
Amazon
SKP SP1004
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1004
Tapered Ground Electrode with Platinum Chip
Fits:
GASGap: .044/1.1mmor CNGGap: .034/0.9mm
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Popular 6
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 6
ProfessionalRapidfirePre-Set Gap: 0.045"
OE-Recommended Gap: 0.040 (in)
View on
Amazon
ACDELCO 15
🇺🇸 US 🇨🇦 CA
SpecialtyRapidfire
Fitment notes — ACDELCO 15
SpecialtyRapidfire
Original Equipment-Recommended Gap: .043
View on
Amazon
BOSCH 6747
🇺🇸 US
OE Fine Wire PlatinumPre-Set Gap: 0.054"
Fitment notes — BOSCH 6747
OE Fine Wire PlatinumPre-Set Gap: 0.054"
Original Equipment is Platinum
View on
Amazon
CHAMPION 3408
🇺🇸 US
Platinum PowerPre-Set Gap: 0.044"
Fitment notes — CHAMPION 3408
Platinum PowerPre-Set Gap: 0.044"
OE-Recommended Gap: 0.044"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 2011 VPG MV-1

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 4.6L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 2011 VPG MV-1?

Our catalog currently lists 21 ignition parts for the 2011 VPG MV-1 across 2 subcategories and 11 brands, covering the 4.6L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 2011 VPG MV-1?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2011 VPG MV-1?

Notes on this page include pre-set gaps of 0.034", 0.040", 0.044", 0.045", 0.050" and 0.054". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 VPG MV-1 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2011 VPG MV-1?

Every part on this page is matched to the 4.6L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2011 VPG MV-1

Ignition Parts for Other VPG MV-1 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.