2011 VPG MV-1 Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: BORG-WARNER 38015BW.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2011 VPG MV-1 — DURA-BOND 7B261CBR.

This table covers the Bushing kits. Read more

DURA-BOND supplies the 3 Bushing Kit parts for the 2011 VPG MV-1.

Part numbers include DURA-BOND TK3, DURA-BOND TK3EK and DURA-BOND TK3HP.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 2011 VPG MV-1.

Part numbers include DURA-BOND 76005 and DURA-BOND 76005X1.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2011 VPG MV-1 — DURA-BOND FAT14BR.

This table covers the related components grouped with this assembly. Read more

SONNAX supplies both parts for the 2011 VPG MV-1.

This group includes SONNAX 7694814K and SONNAX 7694847K.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: ROSTRA 550028.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Extension Housing Bushing parts for the 2011 VPG MV-1.

Listed part numbers: DURA-BOND 26066, DURA-BOND 76066B and DURA-BOND 76066BTG.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Extension Housing Seal parts for the 2011 VPG MV-1 come from 5 brands — NATIONAL, WJB / INMOTION PARTS, ACDELCO and 2 other brands. The "Popular" part is NATIONAL 4764.

Part numbers include NATIONAL 4764 and NATIONAL 4765, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts are listed for the 2011 VPG MV-1, from ATP, SKP and WIX. WIX 58955 carries the "Popular" badge.

In the Economy grade, ATP and SKP supply 2 parts: the catalog's value-priced group. A representative part number is ATP TF247.

The Standard Replacement section lists 3 options from ATP and WIX — built to original-equipment specification. WIX 58955 is listed in this group.

Part numbers include WIX 58955, ATP TF247 and SKP SKB144, among others listed above.

This table covers the Flexplate Mounting bolts. Read more

This group shows a single part: ARP 2542901.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Fluid Pump Bushing parts for the 2011 VPG MV-1.

Listed part numbers: DURA-BOND 02161F, DURA-BOND 02161FT and DURA-BOND 02161FTG.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 2011 VPG MV-1 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS3404, NATIONAL 3404 and WJB / INMOTION PARTS WS3404.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2011 VPG MV-1 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 7929S and WJB / INMOTION PARTS WS7929S.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 VPG MV-1 — BCA NS4764.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 2011 VPG MV-1 come from 3 brands — TRANSTEC, ATP and PIONEER. The "Popular" part is ATP LMS13.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 2 options from ATP and PIONEER — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. ATP LMS13 is listed in this group.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 3 options from TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. TRANSTEC 80000739 is listed in this group.

This group includes ATP LMS13, PIONEER 753074 and TRANSTEC 80000739 and the remaining parts above.

This table covers the Reverse Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TRANSGO AODEBOOST.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies the 3 Shift Improvement Kit parts for the 2011 VPG MV-1.

The Daily Driver section lists 1 option from TRANSGO — grouped for everyday commuting duty. TRANSGO SKAODE is listed in this group.

In the High Performance grade, TRANSGO supplies 2 parts: engineered beyond original-equipment specification. A representative part number is TRANSGO AODEHD2.

Listed part numbers: TRANSGO SKAODE, TRANSGO AODEHD2 and TRANSGO AODE3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS3644.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ATP LE11.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Sun Gear Bushing parts for the 2011 VPG MV-1 come from DURA-BOND.

Listed part numbers: DURA-BOND FAT12 and DURA-BOND SG11.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 2011 VPG MV-1 come from 2 brands — ACDELCO and SCHAEFFLER.

Part numbers include ACDELCO 3404X and SCHAEFFLER SS3042.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

LUBEGARD supplies the 3 Transmission Fluid parts for the 2011 VPG MV-1.

This group includes LUBEGARD 69032, LUBEGARD 69003 and LUBEGARD 69125.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2011 VPG MV-1. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.