This page lists 22 wheel parts for the 2012 VPG MV-1, across 4 part types, covering the 4.6L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.
The wheel hardware on the 2012 VPG MV-1 covers lug nuts, studs, hub caps, TPMS sensors and trim rings. The largest groups are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (14 parts), Tire Pressure Monitoring System (TPMS) Sensor (5 parts) and Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit (2 parts). The other 1 part type covers the remaining 1 part.
The 2012 VPG MV-1 came with a single engine, the 4.6L V8, and every part is verified against it.
5 brands supply wheel parts for the 2012 VPG MV-1, led by STANDARD MOTOR PRODUCTS (9 parts), BH SENS (6 parts) and SCHRADER (4 parts), plus 2 more brands. Quality grades include Valve Stem Assembly, OE Replacement and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 VPG MV-1. 4 parts have it, including SCHRADER 29020 (Tire Pressure Monitoring System (TPMS) Sensor) and STANDARD MOTOR PRODUCTS TPM4012SK (Tire Pressure Monitoring System (TPMS) Stem / Service Kit). Each part number opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VDO / CONTINENTAL | SE10006 | 🇺🇸 US | REDI-Sensor315 MHz | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Popular | 29020 | 🇺🇸 US | ProgrammedIncludes Mounting Hardware | View on Amazon |
| BH SENS | RDE023V43 | 🇺🇸 US | OE Quality 315MHZ Replacement SensorNo Programming Required | View on Amazon |
Premium (Programmed + Clone Capable)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | TPM116A | 🇺🇸 US | Programmed | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM116RA | 🇺🇸 US | Programmed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
5 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2012 VPG MV-1, from STANDARD MOTOR PRODUCTS, VDO / CONTINENTAL, SCHRADER and 1 other brand. SCHRADER 29020 carries the "Popular" badge.
In the Aftermarket / Multi-Application (Programmed) grade, VDO / CONTINENTAL supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is VDO / CONTINENTAL SE10006.
The OE Replacement (Programmed) section lists 2 options from SCHRADER and BH SENS — manufactured to match the original-equipment part in form, fit and function. SCHRADER 29020 is listed in this group.
In the Premium (Programmed + Clone Capable) grade, STANDARD MOTOR PRODUCTS supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS TPM116A.
Listed part numbers: SCHRADER 29020, VDO / CONTINENTAL SE10006 and BH SENS RDE023V43, plus the other parts above.
Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | ID1000 | 🇺🇸 US | TPMS IntellidisplayUSB powered display | View on Amazon |
| SCHRADER | 295002 | 🇺🇸 US | Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2 | View on Amazon |
This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.
2 Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit parts for the 2012 VPG MV-1 come from 2 brands — BH SENS and SCHRADER.
Part numbers include BH SENS ID1000 and SCHRADER 295002.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | TPM4012SK | 🇺🇸 US | Qwik-Sensor Service KitSold Individually | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Popular | 20018 | 🇺🇸 US | Rubber Valve Stem Assembly | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular | TPM2011VK | 🇺🇸 US | Qwik-Sensor ValveSold Individually | View on Amazon |
| BH SENS | RDV043 | 🇺🇸 US | RubberStraight-In Screw | View on Amazon |
| BH SENS | RDV036 | 🇺🇸 US | Fixed Angle MetalSilver 43mm | View on Amazon |
| BH SENS | RDV037 | 🇺🇸 US | Fixed Angle MetalBlack 43mm | View on Amazon |
| BH SENS | RDV038 | 🇺🇸 US | Fixed Angle MetalTitanium 43mm | View on Amazon |
| DENSO | 9990612 | 🇺🇸 US | OE Manufactured | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM930K | 🇺🇸 US | Mounting Location: Wheel Stem | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2020K | 🇺🇸 US | BlackMounting Style: Screwithoutn Core, Seal, Retaining Nut, Cap | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VK | 🇺🇸 US | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VBK | 🇺🇸 US | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VCK | 🇺🇸 US | Qwik-Sensor Valve | View on Amazon |
| VDO / CONTINENTAL | SE59500 | 🇺🇸 US | Continental OE Sensor Kit | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
14 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2012 VPG MV-1 come from 5 brands — STANDARD MOTOR PRODUCTS, BH SENS, SCHRADER and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TPM4012SK.
The Hardware Only section lists 1 option from STANDARD MOTOR PRODUCTS — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TPM4012SK is listed in this group.
In the Valve Stem Assembly grade, STANDARD MOTOR PRODUCTS, BH SENS, SCHRADER and 2 other brands supply 13 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is SCHRADER 20018.
Valve Stem Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20995 | 🇺🇸 US | Long CapAttachment: Snap-In | View on Amazon |
This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.
One part is listed for the 2012 VPG MV-1 — SCHRADER 20995.
Buying Wheel Parts for a 2012 VPG MV-1
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 4.6L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2012 VPG MV-1?
Our catalog currently lists 22 wheel parts for the 2012 VPG MV-1 across 4 subcategories and 5 brands, covering the 4.6L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2012 VPG MV-1?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 VPG MV-1 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 VPG MV-1?
Every part on this page is matched to the 4.6L V8 engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 VPG MV-1
Wheel Parts for Other VPG MV-1 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.