2012 VPG MV-1 Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2012 VPG MV-1 come from 5 brands — FEL-PRO, ENGINE PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO CS97904.

This group includes FEL-PRO CS97904, ENGINE PRO 3797904 and MAHLE / CLEVITE CS5931B and the remaining parts above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 1565401.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2012 VPG MV-1, from BCA, NATIONAL, WJB / INMOTION PARTS and 1 other brand. BCA NS88187 carries the "Popular" badge.

Part numbers include BCA NS88187, NATIONAL 99187 and BCA NS99363, among others listed above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 2012 VPG MV-1 — VICTOR REINZ 711541800.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts are listed for the 2012 VPG MV-1, from FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 4 other brands. FEL-PRO BS40644 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 2012 VPG MV-1 come from 4 brands — FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO ES71328.

This group includes FEL-PRO ES71328, MAHLE / CLEVITE GS33269 and ARP 1564101 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2012 VPG MV-1 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO 26482PT.

This group includes FEL-PRO 26482PT, FEL-PRO 26483PT and MAHLE / CLEVITE 54759 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 2012 VPG MV-1 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO HS26482PT2, FEL-PRO HS26482PT2VK and MAHLE / CLEVITE HS54760, among others listed above.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2012 VPG MV-1 — ARP 1562501.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

3 Harmonic Balancer Repair Sleeve parts are listed for the 2012 VPG MV-1, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS88187, NATIONAL 88187 and WJB / INMOTION PARTS WS88187.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2012 VPG MV-1 come from 3 brands — MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO MS962811, MAHLE / CLEVITE MS19370 and MAHLE / CLEVITE MS19371, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 2012 VPG MV-1, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS92614, MAHLE / CLEVITE MS19372 and VICTOR REINZ 711475700.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2012 VPG MV-1 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 72515, MAHLE / CLEVITE 72112 and VICTOR REINZ 711347100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts are listed for the 2012 VPG MV-1, from BOSCH, VARIOUS MFR, WIX and 5 other brands. WIX 51372XP carries the "Popular" badge.

In the Economy grade, BOSCH, FVP, PRO-TEC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is BOSCH 72227WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51372XP.

The Standard Replacement section lists 5 options from BOSCH, WIX, HASTINGS / BALDWIN and 2 other brands — built to original-equipment specification. BOSCH 3410 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

4 Oil Filter Adapter Gasket / O-Ring parts for the 2012 VPG MV-1 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 70801, FEL-PRO ES73132 and MAHLE / CLEVITE B31584, among others listed above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2012 VPG MV-1 — MAHLE / CLEVITE GS33987.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 2012 VPG MV-1, from FEL-PRO, MAHLE / CLEVITE, SKP and 1 other brand.

This group includes FEL-PRO OS30725R, MAHLE / CLEVITE OS32517 and SKP SKOS30725R and the remaining parts above.

This table covers the Timing Camshaft Gear bolts. Read more

This group shows a single part: ARP 2561001.

This table covers the seals at the Timing Chain Tensioner Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO ES73226.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts are listed for the 2012 VPG MV-1, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO TCS458691, MAHLE / CLEVITE JV5042 and VICTOR REINZ 151022901.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 2012 VPG MV-1, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16207 and VICTOR REINZ 711385000.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 2012 VPG MV-1 — VICTOR REINZ 711541700.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2012 VPG MV-1 — MAHLE / CLEVITE 48322.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 2012 VPG MV-1, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO VS50564R, MAHLE / CLEVITE VS50355 and VICTOR REINZ 151070101.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts are listed for the 2012 VPG MV-1, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO SS72891, MAHLE / CLEVITE SS45892 and VICTOR REINZ 121002701.