This page lists 22 ignition parts for the 2012 VPG MV-1, across 3 part types, covering the 4.6L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2012 VPG MV-1, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 22 listed parts are Spark Plug (12 parts), Ignition Coil (9 parts) and Ignition Lock Cylinder (1 part).
The 2012 VPG MV-1 came with a single engine, the 4.6L V8, and every part is verified against it.
11 brands supply ignition parts for the 2012 VPG MV-1, led by STANDARD MOTOR PRODUCTS (4 parts), CHAMPION (4 parts) and ACDELCO (3 parts), plus 8 more brands. Quality grades include Economy, Platinum and Double Platinum.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 VPG MV-1. 5 parts have it, including SPECTRA PREMIUM C500 (Ignition Coil) and CHAMPION 401 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SPECTRA PREMIUM Popular | C500 | 🇺🇸 US | Contains 1 Units | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular | FD503T | 🇺🇸 US | T-Series | View on Amazon |
| FVP | FD503F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN | 2IGC0119 | 🇺🇸 US | View on Amazon | |
| SKP | SKIC001 | 🇺🇸 US | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | FD503 | 🇺🇸 US | Blue Streak | View on Amazon |
| STANDARD MOTOR PRODUCTS | FD503K8 | 🇺🇸 US | Blue Streak | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | COP9 | 🇺🇸 US | with High Temp Rated Gray Silicone Extended Life Boot | View on Amazon |
| WELLS | 5C1412 | 🇺🇸 US | Requires External Resistor: YES | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
9 Ignition Coil parts for the 2012 VPG MV-1 come from 7 brands — STANDARD MOTOR PRODUCTS, SPECTRA PREMIUM, FVP and 4 other brands. The "Popular" part is SPECTRA PREMIUM C500.
The Economy section lists 5 options from SPECTRA PREMIUM, STANDARD MOTOR PRODUCTS, FVP and 2 other brands — the catalog's value-priced group. SPECTRA PREMIUM C500 is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS FD503.
In the Standard Replacement grade, UNITED MOTOR PRODUCTS and WELLS supply 2 parts: built to original-equipment specification. A representative part number is UNITED MOTOR PRODUCTS COP9.
Listed part numbers: SPECTRA PREMIUM C500, STANDARD MOTOR PRODUCTS FD503T and FVP FD503F, plus the other parts above.
Ignition Lock Cylinder
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | US652L | 🇺🇸 US | without Keys | View on Amazon |
This table covers the lock cylinders in the ignition switch.
This group shows a single part: STANDARD MOTOR PRODUCTS US652L.
Spark Plug
Summary: Notes include pre-set gaps of 0.034", 0.040", 0.044", 0.045", 0.050" and 0.054". Replacement brands in this table include CHAMPION, ACDELCO and BOSCH.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular | 401 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.04" | View on Amazon |
| AUTOLITE | 103 | 🇺🇸 US | Copper ResistorPre-Set Gap: 0.050" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | 41962 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentDouble Platinum | View on Amazon |
| BOSCH | 8113 | 🇺🇸 US | OE Fine Wire Double PlatinumPre-Set Gap: 0.044" | View on Amazon |
| CHAMPION | 7963 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.05" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | 9608 | 🇺🇸 US | OE Fine Wire Double IridiumPre-Set Gap: 0.044" | View on Amazon |
| CHAMPION | 9204 | 🇺🇸 US | IridiumPre-Set Gap: 0.045" | View on Amazon |
| SKP | SP1004 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | 6 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
| ACDELCO | 15 | 🇺🇸 US 🇨🇦 CA | SpecialtyRapidfire | View on Amazon |
| BOSCH | 6747 | 🇺🇸 US | OE Fine Wire PlatinumPre-Set Gap: 0.054" | View on Amazon |
| CHAMPION | 3408 | 🇺🇸 US | Platinum PowerPre-Set Gap: 0.044" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
12 Spark Plug parts are listed for the 2012 VPG MV-1, from CHAMPION, ACDELCO, BOSCH and 2 other brands. CHAMPION 401 carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION and AUTOLITE supply 2 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 401.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO, BOSCH and CHAMPION supply 3 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41962.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 3 options from BOSCH, CHAMPION and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. BOSCH 9608 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, ACDELCO, BOSCH and CHAMPION supply 4 parts: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 6.
Buying Ignition Parts for a 2012 VPG MV-1
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4.6L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2012 VPG MV-1?
Our catalog currently lists 22 ignition parts for the 2012 VPG MV-1 across 3 subcategories and 11 brands, covering the 4.6L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2012 VPG MV-1?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2012 VPG MV-1?
Notes on this page include pre-set gaps of 0.034", 0.040", 0.044", 0.045", 0.050" and 0.054". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 VPG MV-1 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 VPG MV-1?
Every part on this page is matched to the 4.6L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 VPG MV-1
Ignition Parts for Other VPG MV-1 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.