2000 Acura TL Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2000 Acura TL come from 5 brands — TIMKEN, BCA, NATIONAL and 2 other brands. The "Popular" part is TIMKEN KWK99147.

Part numbers include TIMKEN KWK99147, BCA NS99147 and NATIONAL 99147, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 2000 Acura TL come from 13 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2000 Acura TL, from KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1538 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6837XP.

The Standard Replacement section lists 5 options from ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands — built to original-equipment specification. ENGINETECH BB1538 is listed in this group.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2000 Acura TL, from APEX, ENGINETECH, AJUSA and 5 other brands. APEX ACS1040 carries the "Popular" badge.

Part numbers include APEX ACS1040, ENGINETECH HO35CSA and AJUSA 54094400, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 2000 Acura TL come from 5 brands — TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BC1537.

Part numbers include ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2000 Acura TL come from 6 brands — BCA, NATIONAL, SCHAEFFLER and 3 other brands. The "Popular" part is BCA NS99315.

This group includes BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts for the 2000 Acura TL come from 17 brands — ELRING, APEX, VICTOR REINZ and 14 other brands. The "Popular" part is APEX ABS128.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2000 Acura TL, from VICTOR REINZ, ENGINETECH, FEL-PRO and 5 other brands. ENGINETECH HB265 carries the "Popular" badge.

This group includes ENGINETECH HB265, FEL-PRO ES71331 and APEX AHB140 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2000 Acura TL, from AJUSA, APEX, FEL-PRO and 4 other brands. APEX AHG142 carries the "Popular" badge.

Listed part numbers: APEX AHG142, FEL-PRO 26260PT and AJUSA 10125500, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts are listed for the 2000 Acura TL, from ENGINETECH, FEL-PRO, APEX and 4 other brands. APEX AHS1200 carries the "Popular" badge.

This group includes APEX AHS1200, ENGINETECH AC32HSC and AJUSA 52192900 and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2000 Acura TL — SBI 2302171.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11428.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2000 Acura TL, from AJUSA, APEX, ENGINETECH and 1 other brand.

Part numbers include AJUSA 50208800, APEX AFS1200 and ENGINETECH HO32K2, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2000 Acura TL come from 6 brands — MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9599.

Part numbers include ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2000 Acura TL, from SKP, ATP, DAYCO and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594300.

The Standard Replacement section: 3 options from ATP, DAYCO and PIONEER. ATP 102275 is listed in this group.

This group includes SKP SK594300, ATP 102275 and DAYCO PB1575N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2000 Acura TL, from FEL-PRO, APEX, ITM ENGINE COMPONENTS and 2 other brands. FEL-PRO MS96427 carries the "Popular" badge.

Part numbers include FEL-PRO MS96427, FEL-PRO MS963843 and APEX AMS1420, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Plenum Gasket parts for the 2000 Acura TL come from 5 brands — MAHLE / CLEVITE, APEX, VICTOR REINZ and 2 other brands. The "Popular" part is FEL-PRO MS963841.

Listed part numbers: FEL-PRO MS963841, MAHLE / CLEVITE MS20007 and APEX AMS1425, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2000 Acura TL come from 6 brands — MELLING, SBI, ITM ENGINE COMPONENTS and 3 other brands. The "Popular" part is MELLING V0778.

Part numbers include MELLING V0778, SBI 10778 and ITM ENGINE COMPONENTS RV9599, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts for the 2000 Acura TL come from 7 brands — WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 4 other brands. The "Popular" part is ANCHOR 8974.

The Economy section: 3 options from SKP and ULTRA-POWER. SKP SKM9149 is listed in this group.

Standard Replacement: 16 parts, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 8974.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2000 Acura TL come from 3 brands — ANCHOR, SKP and WESTAR.

Listed part numbers: ANCHOR 300713, SKP SKM3114K and WESTAR ETK031.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

63 Oil parts for the 2000 Acura TL come from 5 brands — VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 39 parts from LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2000 Acura TL.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2000 Acura TL come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2000 Acura TL, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.

Part numbers include DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2000 Acura TL come from 4 brands — BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160142, GATES 31284 and MOTORAD MO136 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts for the 2000 Acura TL come from 15 brands — VARIOUS MFR, BOSCH, WIX and 12 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 6 options from VARIOUS MFR, BOSCH, FRAM and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3312.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2000 Acura TL, from APEX and FEL-PRO.

This group includes APEX AOM6025 and FEL-PRO 73040.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2000 Acura TL — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

8 Oil Pan parts are listed for the 2000 Acura TL, from SKP, ACKOJA, ATP and 5 other brands. SKP SK264411 carries the "Popular" badge.

Part numbers include SKP SK264411, ACKOJA A260112 and ATP 103293, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pressure Sender / Switch Seal parts for the 2000 Acura TL come from 2 brands — FEL-PRO and JAPANESE OE.

Part numbers include FEL-PRO 73196 and JAPANESE OE 91319PAAA01.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts for the 2000 Acura TL come from 4 brands — SKP, ITM ENGINE COMPONENTS, MELLING and 1 other brand.

The Economy section: 1 option from SKP. SKP SKPM395 is listed in this group.

Standard Replacement: 3 parts, from ITM ENGINE COMPONENTS, MELLING and TOPLINE. A representative part number is ITM ENGINE COMPONENTS 0571517.

Part numbers include SKP SKPM395, ITM ENGINE COMPONENTS 0571517 and MELLING M516, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 2000 Acura TL, from ELRING and MAHLE / CLEVITE.

This group includes ELRING 967650 and MAHLE / CLEVITE JV5083.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Oil Pump Seal parts are listed for the 2000 Acura TL, from ACDELCO, TIMKEN, BCA and 3 other brands. ACDELCO 711181 carries the "Popular" badge.

Listed part numbers: ACDELCO 711181 and BCA NS711181, plus the other parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 2000 Acura TL, from HASTINGS MANUFACTURING, ENGINETECH, SEALED POWER and 1 other brand. ENGINETECH S89416 carries the "Popular" badge.

The Premium section lists 2 options from ENGINETECH and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S89416 is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. HASTINGS MANUFACTURING 2C4972S is listed in this group.

Part numbers include ENGINETECH S89416, SEALED POWER E985KC and HASTINGS MANUFACTURING 2C4972S, among others listed above.

This table covers the Thrust washers. Read more

4 Thrust Washer parts for the 2000 Acura TL come from 4 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

This group includes ENGINETECH TW1537, ITM ENGINE COMPONENTS 1T4450 and KING ENGINE BEARINGS TW1015SI and the remaining parts above.