2008 Chrysler Pacifica Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Clutch Coil Connector parts for the 2008 Chrysler Pacifica come from WELLS.

Part numbers include WELLS 1P1711 and WELLS 1P1878.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Chrysler Pacifica.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2008 Chrysler Pacifica, from FOUR SEASONS and GPD.

Part numbers include FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 ABS Wheel Speed Sensor Connector parts for the 2008 Chrysler Pacifica come from 7 brands — STANDARD MOTOR PRODUCTS, ACDELCO, DORMAN and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2008 Chrysler Pacifica come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and WELLS 1P2224.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2008 Chrysler Pacifica, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3631.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Alternator / Generator Connector parts for the 2008 Chrysler Pacifica come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP4347.

Part numbers include STANDARD MOTOR PRODUCTS HP4347, WELLS 1P2047 and HOLSTEIN 2HAR0035, among others listed above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ambient Air Temperature Sensor Connector parts for the 2008 Chrysler Pacifica come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 3 other brands. The "Popular" part is WALKER PRODUCTS 2701055.

Listed part numbers: WALKER PRODUCTS 2701055, WELLS 1P1311 and FOUR SEASONS 70013, plus the other parts above.

This table covers the harness connectors at the Auto Shut Down Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Auto Shut Down Relay Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: BWD/NIEHOFF PT1258.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

18 Blower Motor Control Module / Resistor Connector parts are listed for the 2008 Chrysler Pacifica, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 7 other brands. GPD 1712894 carries the "Popular" badge.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

6 Body Wiring Harness / Connector parts are listed for the 2008 Chrysler Pacifica, from MOPAR and STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS S1960 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS S1960, MOPAR 4578597AB and MOPAR 4869081AF, plus the other parts above.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Fluid Level Sensor Connector parts are listed for the 2008 Chrysler Pacifica, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3631.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2008 Chrysler Pacifica, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2313 and WELLS 1P2383.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Camshaft Position Sensor Connector parts for the 2008 Chrysler Pacifica come from 4 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Part numbers include HOLSTEIN 2HAR0060, STANDARD MOTOR PRODUCTS S2316 and UNITED MOTOR PRODUCTS CON62, among others listed above.

This table covers the harness connectors at the Computer Control Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Chrysler Pacifica.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Crankshaft Position Sensor Connector parts for the 2008 Chrysler Pacifica come from 5 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, ROSTRA and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

Part numbers include STANDARD MOTOR PRODUCTS S2316, HOLSTEIN 2HAR0060 and ROSTRA 610139, among others listed above.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2008 Chrysler Pacifica — MOPAR 4868906AB.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1645.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 3 Engine Wiring Harness / Connector parts for the 2008 Chrysler Pacifica.

Part numbers include MOPAR 4868789AE, MOPAR 4868789AF and MOPAR 5148921AA.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 6S1047.

This table covers the harness connectors at the Fuel Injection Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injection Relay Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 Fuel Injector Connector parts for the 2008 Chrysler Pacifica come from 8 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 5 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Chrysler Pacifica.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Fuel Pump Cutoff Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Pump Cutoff Relay Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Headlamp Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2521.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2521.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 3 Headlamp Wiring Harness / Connector parts for the 2008 Chrysler Pacifica.

Part numbers include MOPAR 4868817AI, MOPAR 4869014AI and MOPAR 4869853AE.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P1580.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: ULTRA-POWER 2701055.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 HVAC Relay Connector parts are listed for the 2008 Chrysler Pacifica, from STANDARD MOTOR PRODUCTS and HOLSTEIN.

This group includes HOLSTEIN 2HAR0056, STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Ignition Coil Connector parts for the 2008 Chrysler Pacifica come from 3 brands — FAMOUS BRAND, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: FAMOUS BRAND PTA3009, STANDARD MOTOR PRODUCTS S2882 and WELLS 1P2664.

This table covers the harness connectors at the Ignition Condenser / Capacitor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P2226.

This table covers the harness connectors at the Ignition Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Relay Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Starter Switch Connector parts for the 2008 Chrysler Pacifica come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1768.

Listed part numbers: STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267, plus the other parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Knock / Detonation Sensor Connector parts for the 2008 Chrysler Pacifica come from 4 brands — DORMAN, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.

Part numbers include DORMAN 85137, UNITED MOTOR PRODUCTS CON201 and WALKER PRODUCTS 2701034, among others listed above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts for the 2008 Chrysler Pacifica come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610107, STANDARD MOTOR PRODUCTS S2816 and WELLS 1P1795.

This table covers the harness connectors at the Multi-Function Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2521.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Oil Pressure Sender / Switch Connector parts are listed for the 2008 Chrysler Pacifica, from WELLS, UNITED MOTOR PRODUCTS, ROSTRA and 2 other brands. UNITED MOTOR PRODUCTS CON58 carries the "Popular" badge.

Part numbers include UNITED MOTOR PRODUCTS CON58, WELLS 1P1711 and ROSTRA 610040, among others listed above.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2008 Chrysler Pacifica come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1932 and WELLS 1P3359.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — METRA AXACCH4.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2086.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2024.

This table covers the harness connectors at the Parking Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Brake Switch Connector parts are listed for the 2008 Chrysler Pacifica, from FAMOUS BRAND and WELLS.

Listed part numbers: FAMOUS BRAND PTA3009 and WELLS 1P2226.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — STANDARD MOTOR PRODUCTS S2462.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Relay Connector parts for the 2008 Chrysler Pacifica come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2133 and WELLS 1P1794.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 4 Radio Connector parts for the 2008 Chrysler Pacifica.

Listed part numbers: METRA 706502, METRA 706506 and METRA AWWHCR2, plus the other parts above.

This table covers the harness connectors at the Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Chrysler Pacifica.

This group includes STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the Repair harnesses. Read more

5 Repair Harness parts for the 2008 Chrysler Pacifica come from 2 brands — ROSTRA and ATP. The "Popular" part is ROSTRA 3500172.

This group includes ROSTRA 3500172, ATP TE12 and ATP TE14 and the remaining parts above.

This table covers the harness connectors at the Shift Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — STANDARD MOTOR PRODUCTS S1911.

This table covers the harness connectors at the Side Marker Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P1580.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Speed Sensor Connector parts are listed for the 2008 Chrysler Pacifica, from WELLS, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand. WALKER PRODUCTS 2701055 carries the "Popular" badge.

This group includes WALKER PRODUCTS 2701055, WELLS 1P1311 and STANDARD MOTOR PRODUCTS HP4215 and the remaining parts above.

This table covers the harness connectors at the Starter Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Starter Motor Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Tail Lamp Assembly. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Tail Lamp Assembly Connector parts for the 2008 Chrysler Pacifica come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Listed part numbers: ROSTRA 610090, STANDARD MOTOR PRODUCTS S1922 and UNITED MOTOR PRODUCTS CON50, plus the other parts above.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts for the 2008 Chrysler Pacifica come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2839.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts are listed for the 2008 Chrysler Pacifica, from DORMAN and WELLS.

This group includes DORMAN 645233 and WELLS 1P2225.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Adapter Connector parts for the 2008 Chrysler Pacifica come from 2 brands — CURT and MOPAR.

Part numbers include CURT 57300 and MOPAR 56019823.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Trailer Connector parts are listed for the 2008 Chrysler Pacifica, from CURT, TEKONSHA, MOPAR and 1 other brand. CURT 55381 carries the "Popular" badge.

This group includes CURT 55381, CURT 55530 and MOPAR 82209771AB and the remaining parts above.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P4037.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P2521.

This table covers the harness connectors at the Vapor Canister. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Chrysler Pacifica.

This group includes STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Canister Purge Valve / Solenoid Connector parts for the 2008 Chrysler Pacifica come from 4 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.

This group includes STANDARD MOTOR PRODUCTS S2052, UNITED MOTOR PRODUCTS CON58 and WALKER PRODUCTS 2701132 and the remaining parts above.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Leak Detection Pump Connector parts for the 2008 Chrysler Pacifica come from 3 brands — STANDARD MOTOR PRODUCTS, ROSTRA and WELLS.

Listed part numbers: ROSTRA 610161, STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024, plus the other parts above.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Washer Fluid Level Sensor Connector parts for the 2008 Chrysler Pacifica come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S3082 and WELLS 1P2670.

This table covers the harness connectors at the Window Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Pacifica — WELLS 1P1878.

This table covers the harness connectors at the Wiper / Washer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2530.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Wiper Motor Connector parts for the 2008 Chrysler Pacifica come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Wiper Motor Module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Wiper Motor Module Connector parts for the 2008 Chrysler Pacifica come from 2 brands — ROSTRA and WELLS.

Listed part numbers: ROSTRA 610236 and WELLS 1P1558.