2008 Chrysler Pacifica Automatic Transmission Parts

This table covers the pistons inside a transmission accumulator. Read more

This group shows a single part: MOPAR 4446620AD.

This table covers the Accumulator springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: MOPAR 4800310AA.

This table covers the Automatic Transmission assemblies. Read more

2 Automatic Transmission Assembly parts for the 2008 Chrysler Pacifica come from MOPAR.

Listed part numbers: MOPAR R8037280AC and MOPAR R8039386AC.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts are listed for the 2008 Chrysler Pacifica, from ATP and PIONEER.

Part numbers include ATP TB9 and PIONEER 755192.

This table covers the Bushing kits. Read more

One part is listed for the 2008 Chrysler Pacifica — DURA-BOND TK38.

This table covers the Case covers. Read more

4 Case Cover parts for the 2008 Chrysler Pacifica come from 2 brands — DORMAN and ATP.

Listed part numbers: ATP 103237, DORMAN 265820 and DORMAN 265898, plus the other parts above.

This table covers the Clutch drums. Read more

This group shows a single part: PA CARGO 107559.

This table covers the pistons that apply a clutch pack. Read more

This group shows a single part: MOPAR 4431611.

This table covers the Clutch Pack Piston retainers. Read more

This group shows a single part: MOPAR 5078605AB.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: MOPAR 4659053.

This table covers the Clutch Plate and Housing assemblies. Read more

This group shows a single part: MOPAR 5078815AC.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies both parts for the 2008 Chrysler Pacifica.

The Friction Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RHT96215 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN 000621.

Part numbers include RAYBESTOS POWERTRAIN RHT96215 and RAYBESTOS POWERTRAIN 000621.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: ROSTRA 550019.

This table covers the seals at the Control Solenoid. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Control Solenoid Seal parts for the 2008 Chrysler Pacifica come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP TG31 and PIONEER 749307.

This table covers the Dipstick / Fluid Filler tubes. Read more

One part is listed for the 2008 Chrysler Pacifica — DORMAN 917327.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

18 Filter parts are listed for the 2008 Chrysler Pacifica, from ATP, WIX, PIONEER and 6 other brands. ATP B102 carries the "Popular" badge.

In the Economy grade, ATP, PA CARGO and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is ATP TF102.

The Standard Replacement section lists 15 options from ATP, WIX, PIONEER and 4 other brands — built to original-equipment specification. ATP B102 is listed in this group.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

This group shows a single part: MOPAR 4736299AB.

This table covers the Flexplate Mounting bolts. Read more

This group shows a single part: DORMAN 14131.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 800724.

This table covers the pans that hold automatic-transmission fluid. Read more

9 Fluid Pan parts for the 2008 Chrysler Pacifica come from 6 brands — SPECTRA PREMIUM, SKP, ATP and 3 other brands. The "Popular" part is SKP SK265833.

Listed part numbers: SKP SK265833, SKP SK265832 and ATP 103368, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Fluid Pan Gasket parts are listed for the 2008 Chrysler Pacifica, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. FEL-PRO TOS18687 carries the "Popular" badge.

Listed part numbers: FEL-PRO TOS18687, FEL-PRO TOS18757 and MAHLE / CLEVITE W32770, plus the other parts above.

This table covers the Fluid Pan magnets. Read more

This group shows a single part: MOPAR 68207789AA.

This table covers the Fluid pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

4 Fluid Pressure Sensor parts for the 2008 Chrysler Pacifica come from 4 brands — HOLSTEIN, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand.

Part numbers include HOLSTEIN 2OPS0188, ROSTRA 501204VC and STANDARD MOTOR PRODUCTS PS750, among others listed above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2008 Chrysler Pacifica — MOPAR R8052759AA.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2008 Chrysler Pacifica — DURA-BOND 01998TG.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts for the 2008 Chrysler Pacifica come from 2 brands — MOPAR and PIONEER.

Listed part numbers: MOPAR 5078568AA and PIONEER 749533.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 2008 Chrysler Pacifica come from 2 brands — SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 15002A, SKF 15022 and WJB / INMOTION PARTS WS15002A.

This table covers the governors and modulators that control transmission shift pressure. Read more

3 Governor / Modulator parts are listed for the 2008 Chrysler Pacifica, from DORMAN and MOPAR.

This group includes DORMAN 601217, DORMAN 926442 and MOPAR 5078708AC.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: MOPAR 5078709AB.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2008 Chrysler Pacifica come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS8609, NATIONAL 8609 and WJB / INMOTION PARTS WS8609.

This table covers the Output shafts. Read more

This group shows a single part: MOPAR 68398958AA.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BCA NBNP952605.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

6 Output Shaft Repair Sleeve parts are listed for the 2008 Chrysler Pacifica, from SCHAEFFLER, NATIONAL, SKF and 2 other brands. NATIONAL 99157 carries the "Popular" badge.

Listed part numbers: NATIONAL 99157, SKF 99153 and BCA NS99157, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Output Shaft Seal parts are listed for the 2008 Chrysler Pacifica, from ACDELCO, NATIONAL, BCA and 4 other brands. ACDELCO 3459 carries the "Popular" badge.

Listed part numbers: ACDELCO 3459 and BCA NS3459, plus the other parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Pinion Bearing parts for the 2008 Chrysler Pacifica come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA36 is listed in this group.

Standard Replacement: 2 parts, from BCA and NATIONAL. A representative part number is BCA NBA36.

Part numbers include WJB / INMOTION PARTS WTA36, BCA NBA36 and NATIONAL A36.

This table covers the Piston kits. Read more

6 Piston Kit parts for the 2008 Chrysler Pacifica come from PA CARGO. The "Popular" part is PA CARGO 107764.

Listed part numbers: PA CARGO 107764, PA CARGO 61837A and PA CARGO 92912, plus the other parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts are listed for the 2008 Chrysler Pacifica, from ROSTRA and WELLS.

Part numbers include ROSTRA 520733 and WELLS 2N1253.

This table covers the rebuild kits for this assembly. Read more

12 Rebuild Kit parts for the 2008 Chrysler Pacifica come from 5 brands — PA CARGO, ATP, TRANSTEC and 2 other brands. The "Popular" part is PA CARGO DK9200DS.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 2 options from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK9200DS is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, MOPAR, ATP and PIONEER supply 3 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68272623AB.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 7 options from TRANSTEC, PA CARGO and ATP — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K92900D is listed in this group.

This table covers the pistons in a transmission servo. Read more

One part is listed for the 2008 Chrysler Pacifica — PA CARGO K10790099.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

2 Shift Cable parts for the 2008 Chrysler Pacifica come from MOPAR.

This group includes MOPAR 4683980AA and MOPAR 4683980AB.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies both parts for the 2008 Chrysler Pacifica.

Part numbers include TRANSGO SK604 and TRANSGO SK62TE.

This table covers the Shift Interlock latches. Typical signs include a door that will not stay closed, or a latch that will not release. Lubricate and align the striker before replacing a latch that still clicks. Read more

2 Shift Interlock Latch parts for the 2008 Chrysler Pacifica come from 2 brands — DORMAN and SKP.

Part numbers include DORMAN 924706 and SKP SK924706.

This table covers the Shift Interlock solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2008 Chrysler Pacifica — STANDARD MOTOR PRODUCTS SIA5.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2178.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

11 Shift Solenoid parts for the 2008 Chrysler Pacifica come from 5 brands — PA CARGO, STANDARD MOTOR PRODUCTS, WELLS and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TCS398.

In the Single Solenoid grade, STANDARD MOTOR PRODUCTS supplies 1 part: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS398.

In the Solenoid Pack / Kit grade, STANDARD MOTOR PRODUCTS, DORMAN, MOPAR and 1 other brand supply 5 parts: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 609043.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Solenoid Switch Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Solenoid Switch Valve Plug parts for the 2008 Chrysler Pacifica come from TRANSGO.

Part numbers include TRANSGO RFESV420NT, TRANSGO RFESV453NT and TRANSGO RFESV420WT, among others listed above.

This table covers the Sun gears. Read more

This group shows a single part: MOPAR 4377080.

This table covers the Sun Gear bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MOPAR 4412229AB.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND GMT92.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

5 Torque Converter parts are listed for the 2008 Chrysler Pacifica, from TC REMANUFACTURING and MOPAR.

This group includes MOPAR R8036990AD, MOPAR RL036990AD and TC REMANUFACTURING 58590 and the remaining parts above.

This table covers the Torque Converter bolts. Read more

This group shows a single part: DORMAN 14130.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Torque Converter Clutch Solenoid parts are listed for the 2008 Chrysler Pacifica, from DORMAN, MOPAR and ROSTRA.

Listed part numbers: DORMAN 926378, MOPAR 5169313AA and ROSTRA 520734.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts for the 2008 Chrysler Pacifica come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include SCHAEFFLER SR3477 and WJB / INMOTION PARTS WS99149.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Torque Converter Shaft Seal parts for the 2008 Chrysler Pacifica come from 7 brands — NATIONAL, WJB / INMOTION PARTS, ACDELCO and 4 other brands. The "Popular" part is NATIONAL 710628.

Listed part numbers: NATIONAL 710628 and NATIONAL 331228H, plus the other parts above.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Shaft Bearing parts for the 2008 Chrysler Pacifica come from 5 brands — BCA, WJB / INMOTION PARTS, ACDELCO and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WTA35.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA35 is listed in this group.

Standard Replacement: 5 parts, from BCA, ACDELCO, NATIONAL and 1 other brand. A representative part number is ACDELCO A35.

This group includes WJB / INMOTION PARTS WTA35, ACDELCO A35 and BCA NBLM501310 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

15 Transmission Fluid parts are listed for the 2008 Chrysler Pacifica, from LUCAS OIL, VALVOLINE, LIQUI MOLY and 4 other brands. VALVOLINE 822348 carries the "Popular" badge.

In the ATF +4 grade, VALVOLINE and PENTOSIN supply 5 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822348.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, LIQUI MOLY, LUCAS OIL and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the ZF Fluid grade, ZF supplies 1 part: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is ZF 5961308623.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts are listed for the 2008 Chrysler Pacifica, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: PIONEER 615353.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

4 Valve Body parts are listed for the 2008 Chrysler Pacifica, from SONNAX and MOPAR.

This group includes MOPAR R5078723AD, SONNAX CHR195 and SONNAX CHR410 and the remaining parts above.

This table covers the Valve Body filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

One part is listed for the 2008 Chrysler Pacifica — MOPAR 5078822AC.

This table covers the gaskets that seal the Valve Body. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5169080AA.