2008 Chrysler Pacifica Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

19 Alignment Bolt / Camber Plate parts for the 2008 Chrysler Pacifica come from 10 brands — MEVOTECH, DELPHI, MOOG and 7 other brands. The "Popular" part is DELPHI TAL10015.

In the Daily Driver grade, DELPHI, MOOG, ACDELCO and 1 other brand supply 8 parts: grouped for everyday commuting duty. A representative part number is DELPHI TAL10015.

The Economy section lists 11 options from QUICK STEER, SKP, DORMAN and 4 other brands — the catalog's value-priced group. QUICK STEER K90474 is listed in this group.

This table covers the Alignment Caster / Camber bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Alignment Caster / Camber Bushing parts are listed for the 2008 Chrysler Pacifica, from MOOG, ACDELCO, MEVOTECH and 2 other brands. MOOG K100173 carries the "Popular" badge.

The Daily Driver section: 3 options from MOOG, ACDELCO and MEVOTECH. MOOG K100173 is listed in this group.

Economy: 2 parts, from DORMAN and FVP. A representative part number is DORMAN 545265.

Listed part numbers: MOOG K100173, ACDELCO 45K0232 and MEVOTECH MS25015, plus the other parts above.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

10 Ball Joint parts for the 2008 Chrysler Pacifica come from 9 brands — FAMOUS BRAND, DELPHI, DORMAN and 6 other brands. The "Popular" part is FAMOUS BRAND 2700277007.

Daily Driver: 6 parts, from DELPHI, DORMAN, MEVOTECH and 3 other brands. A representative part number is DELPHI TC5968.

The Economy section: 4 options from FAMOUS BRAND, QUICK STEER and ULTRA-POWER. FAMOUS BRAND 2700277007 is listed in this group.

This table covers the bump stops that limit suspension travel. Read more

One part is listed for the 2008 Chrysler Pacifica — MOPAR 4684442AB.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

7 Coil Spring parts are listed for the 2008 Chrysler Pacifica, from LESJÖFORS, TRW and HUSKY SPRING. LESJÖFORS 4414921 carries the "Popular" badge.

Listed part numbers: LESJÖFORS 4414921, LESJÖFORS 4414920 and HUSKY SPRING SC20859, plus the other parts above.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

5 Coil Spring Seat / Insulator parts for the 2008 Chrysler Pacifica come from 2 brands — WESTAR and MONROE. The "Popular" part is WESTAR ST8959.

This group includes WESTAR ST8959, MONROE 908958 and MONROE 908960 and the remaining parts above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

55 Control Arm parts for the 2008 Chrysler Pacifica come from 12 brands — MEVOTECH, MOOG, DELPHI and 9 other brands. The "Popular" part is MOOG RK621362. Daily Driver and Economy are all represented, and Daily Driver alone accounts for 36 parts.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Control Arm Bushing parts for the 2008 Chrysler Pacifica come from 4 brands — DORMAN, MEVOTECH, SUSPENSIA and 1 other brand. The "Popular" part is MEVOTECH MS254190.

Daily Driver: 2 parts, from MEVOTECH and SUSPENSIA. A representative part number is MEVOTECH MS254190.

The Economy section: 3 options from DORMAN and FVP. DORMAN 533502 is listed in this group.

Listed part numbers: MEVOTECH MS254190, SUSPENSIA X88BU5565 and DORMAN 533502, plus the other parts above.

This table covers the Front End kits. Read more

One part is listed for the 2008 Chrysler Pacifica — ULTRA-POWER KIT464.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

14 Shock / Strut parts for the 2008 Chrysler Pacifica come from 6 brands — MONROE, FCS, KYB and 3 other brands. The "Popular" part is FCS 346657.

The Economy section: 4 options from OSC, MONROE and PRT. MONROE 802130 is listed in this group.

In the Increased Handling/Stability grade, MONROE supplies 1 part: grouped under the catalog's "Increased Handling/Stability" designation — the notes column spells out what sets them apart. A representative part number is MONROE 72130.

The Original Ride Quality section lists 9 options from FCS, KYB, SACHS and 1 other brand — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. FCS 346657 is listed in this group.

This table covers complete strut assemblies with the spring already installed. Read more

15 Shock / Strut & Coil Spring Assembly parts for the 2008 Chrysler Pacifica come from 9 brands — PRT, SENSEN, FCS and 6 other brands. The "Popular" part is PRT 816653.

The Economy section: 6 options from PRT, SENSEN, FAMOUS BRAND and 1 other brand. PRT 816653 is listed in this group.

The Original Ride Quality section: 9 options from FCS, GABRIEL, HL MANDO and 2 other brands. FCS 1331685L is listed in this group.

This table covers the Shock / Strut bellows. Read more

5 Shock / Strut Bellow parts are listed for the 2008 Chrysler Pacifica, from SKP, GABRIEL, KYB and 2 other brands. SKP SK90462 carries the "Popular" badge.

Listed part numbers: SKP SK90462, GABRIEL 143059 and KYB SB126, plus the other parts above.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Shock / Strut Mount parts are listed for the 2008 Chrysler Pacifica, from KYB, MEVOTECH, DEA / MARMON RIDE CONTROL and 4 other brands. MONROE 905911 carries the "Popular" badge.

The Daily Driver section: 6 options from KYB, MEVOTECH, MONROE and 1 other brand. MONROE 905911 is listed in this group.

Economy: 4 parts, from DEA / MARMON RIDE CONTROL, VARIOUS MFR and WESTAR. A representative part number is DEA / MARMON RIDE CONTROL 4713638.

This table covers the Suspension Conversion kits. Read more

2 Suspension Conversion Kit parts for the 2008 Chrysler Pacifica come from 2 brands — FCS and MONROE.

Listed part numbers: FCS 95032 and MONROE 90030C.

This table covers the brackets that mount the Sway Bar. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 68257343AA.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Sway Bar Bushing parts for the 2008 Chrysler Pacifica come from 2 brands — MOPAR and DORMAN.

Daily Driver: 2 parts, from MOPAR. A representative part number is MOPAR 4743163AB.

The Economy section: 2 options from DORMAN. DORMAN 928526 is listed in this group.

Part numbers include MOPAR 4743163AB, MOPAR 4766876AC and DORMAN 928526, among others listed above.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

27 Sway Bar Link parts for the 2008 Chrysler Pacifica come from 12 brands — MEVOTECH, DORMAN, DELPHI and 9 other brands. The "Popular" part is DELPHI TC1575. Grades run from Daily Driver through Premium; Daily Driver is the most populated section, led by DORMAN, DELPHI, MOOG and 5 other brands.