1968 Fargo A100 Van Drivetrain Parts

This table covers the bearings and races that support the differential carrier. Read more

8 Differential Carrier Bearing / Race parts are listed for the 1968 Fargo A100 Van, from WJB / INMOTION PARTS and BCA. WJB / INMOTION PARTS WTLM104949 carries the "Popular" badge. All of them fit every engine offered in the 1968 A100 Van.

In the Economy grade, WJB / INMOTION PARTS supplies 4 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTLM104949.

The Standard Replacement section lists 4 options from BCA — built to original-equipment specification. BCA NBLM104949 is listed in this group.

This group includes WJB / INMOTION PARTS WTLM104949, WJB / INMOTION PARTS WT25520 and WJB / INMOTION PARTS WTLM104912 and the remaining parts above.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Differential Cover Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MOTIVE GEAR and VICTOR REINZ. All of them fit every engine offered in the 1968 A100 Van.

Listed part numbers: FEL-PRO RDS6583, MOTIVE GEAR 5101 and VICTOR REINZ 711482500.

This table covers the Differential Gear Installation kits. Read more

This group shows a single part: MOTIVE GEAR C875IKM.

This table covers the bearings and races on the differential pinion. Read more

17 Differential Pinion Bearing / Race parts for the 1968 Fargo A100 Van come from 3 brands — BCA, WJB / INMOTION PARTS and MOTIVE GEAR. The "Popular" part is WJB / INMOTION PARTS WTM88048. Every part fits all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The Economy section: 7 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTM88048 is listed in this group.

Standard Replacement: 10 parts, from BCA and MOTIVE GEAR. A representative part number is BCA NBM88010.

This table covers the Differential Pinion nuts. Read more

One part is listed for the 1968 Fargo A100 Van — MOTIVE GEAR 1260823.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts are listed for the 1968 Fargo A100 Van, from SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1968 A100 Van.

Listed part numbers: SCHAEFFLER SR3506 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts are listed for the 1968 Fargo A100 Van, from NATIONAL, BCA and WJB / INMOTION PARTS. NATIONAL 8515N carries the "Popular" badge. All of them fit every engine offered in the 1968 A100 Van.

This group includes NATIONAL 8515N, NATIONAL 7216 and BCA NS8515N and the remaining parts above.

This table covers the Differential Pinion Shaft Lock bolts. Read more

This group shows a single part: MOTIVE GEAR 305105S.

This table covers the Differential Pinion shims. Read more

One part is listed for the 1968 Fargo A100 Van — MOTIVE GEAR 1109.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

9 Differential Rebuild Kit parts for the 1968 Fargo A100 Van come from 2 brands — MOTIVE GEAR and WJB / INMOTION PARTS. The "Popular" part is MOTIVE GEAR R875RM. Every part fits all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The Master Kit section lists 4 options from MOTIVE GEAR — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. MOTIVE GEAR R875RMMK is listed in this group.

In the Standard Kit grade, MOTIVE GEAR and WJB / INMOTION PARTS supply 5 parts: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR R875RM.

This group includes MOTIVE GEAR R875RM, MOTIVE GEAR R875RMMK and MOTIVE GEAR R875RMAMK and the remaining parts above.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

This group shows a single part: BCA NS88187.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

One part is listed for the 1968 Fargo A100 Van — MOTIVE GEAR C887M.

This table covers the Differential Ring Gear bolts. Read more

One part is listed for the 1968 Fargo A100 Van — MOTIVE GEAR 1304.

This table covers the spools that lock the differential side gears together. Read more

This group shows a single part: RICHMOND XL5200.

This table covers the Drive Shaft End yokes. Read more

RICHMOND supplies both parts for the 1968 Fargo A100 Van. All of them fit every engine offered in the 1968 A100 Van.

Listed part numbers: RICHMOND 962706 and RICHMOND 962706K.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: WJB / INMOTION PARTS WRQ15902.

This table covers the U-joints in the driveshaft. Read more

MOOG supplies both parts for the 1968 Fargo A100 Van. All of them fit every engine offered in the 1968 A100 Van.

This group includes MOOG 315G and MOOG 317.

This table covers the Universal Joint Strap kits. Read more

One part is listed for the 1968 Fargo A100 Van — MOOG 31810.