1968 Fargo A100 Van Steering Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 23 steering parts for the 1968 Fargo A100 Van, across 7 part types, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Every part shows its brand, manufacturer part number and fitment notes.

On the 1968 Fargo A100 Van, the steering system connects driver to road through the rack, pump, tie rods, and column components. 14 parts of the 23 listed are Power Steering Fluid (5 parts), Power Steering Pump Seal Kit (5 parts) and King Pin Set (4 parts). The other 4 part types cover the remaining 9 parts.

King Pin Set

Brand Part Number Markets Notes Buy
MEVOTECH Fits: 2.8L 170cid L6 MS25930
🇨🇦 CA
Supreme
Fitment notes — MEVOTECH MS25930
Supreme
Front0.8730 IN Diameter5.375 IN Length
View on
Amazon
MEVOTECH Fits: 2.8L 170cid L6 MS25929
🇨🇦 CA
SupremeContains Metal Bushing
Fitment notes — MEVOTECH MS25929
SupremeContains Metal Bushing
Front0.8730 IN Diameter5.375 IN Length
View on
Amazon
MEVOTECH Fits: 2.8L 170cid L6 MS25923
🇨🇦 CA
SupremeContains Metal Bushing
Fitment notes — MEVOTECH MS25923
SupremeContains Metal Bushing
FrontPin Size: 0.8725" Diameter. X 5.375" Lwith 2200LB Axle(s) or with 2500LB Axle(s) or with 2800LB Axle(s)
View on
Amazon
MOOG Fits: 2.8L 170cid L6 8453B
🇨🇦 CA
Contains Metal Bushing
Fitment notes — MOOG 8453B
Contains Metal Bushing
with 2500LB & 2800LB Axlewith .8730 (In) x 5.375 (In)
View on
Amazon

This table covers the King Pin sets.

Power Steering Fluid

Brand Part Number Markets Notes Buy
EDELMANN Popular Fits: 2.8L 170cid L6 70694
🇨🇦 CA
Quart
View on
Amazon
LUBEGARD Fits: 2.8L 170cid L6 23201
🇨🇦 CA
1 QuartSynthetic Power Steering Fluid
View on
Amazon
LUBEGARD Fits: 2.8L 170cid L6 23205
🇨🇦 CA
5 GallonSynthetic Power Steering Fluid
View on
Amazon
LUBEGARD Fits: 2.8L 170cid L6 23232
🇨🇦 CA
Synthetic Power Steering Fluid1 Quart
View on
Amazon
LUBEGARD Fits: 2.8L 170cid L6 23255
🇨🇦 CA
55 GallonSynthetic Power Steering Fluid
View on
Amazon

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.

Power Steering Pressure Hose

Brand Part Number Markets Notes Buy
EDELMANN Fits: 2.8L 170cid L6 71304
🇨🇦 CA
Power Steering Universal Tube/Hose Kit
View on
Amazon

This table covers the Power Steering Pressure hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle.

Power Steering Pump Seal Kit

Brand Part Number Markets Notes Buy
EDELMANN Popular Fits: 2.8L 170cid L6 7918
🇨🇦 CA
View on
Amazon
EDELMANN Fits: 2.8L 170cid L6 7910
🇨🇦 CA
Includes Saginaw Housing Bushing
View on
Amazon
FVP Fits: 2.8L 170cid L6 7910
🇨🇦 CA
Pump Rebuild Kit
View on
Amazon
FVP Fits: 2.8L 170cid L6 7918
🇨🇦 CA
View on
Amazon
SUNSONG Fits: 2.8L 170cid L6 8401491
🇨🇦 CA
View on
Amazon

This table covers the Power Steering Pump Seal kits.

Power Steering Pump Shaft Seal

Brand Part Number Markets Notes Buy
EDELMANN Fits: 2.8L 170cid L6 8709
🇨🇦 CA
View on
Amazon
FVP Fits: 2.8L 170cid L6 8709
🇨🇦 CA
View on
Amazon
NATIONAL Fits: 2.8L 170cid L6 7013S
🇨🇦 CA
Saginaw
View on
Amazon
WJB / INMOTION PARTS Fits: 2.8L 170cid L6 WS7013S
🇨🇦 CA
Saginaw
View on
Amazon

This table covers the seals at the Power Steering Pump Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Steering Gear Sector Shaft Seal

Brand Part Number Markets Notes Buy
BCA Fits: 2.8L 170cid L6 NS6859S
🇨🇦 CA
with Chrysler Design
View on
Amazon
NATIONAL Fits: 2.8L 170cid L6 6859S
🇨🇦 CA
with Chrysler Designwith Manual Steering
View on
Amazon
WJB / INMOTION PARTS Fits: 2.8L 170cid L6 WS6859S
🇨🇦 CA
with Manual steeringwith Chrysler Design
View on
Amazon

This table covers the seals at the Steering Gear Sector Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Tie Rod End

Brand Part Number Markets Notes Buy
DELPHI Fits: 2.8L 170cid L6 TA5307
🇨🇦 CA
Right Outer
View on
Amazon

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.

Buying Steering Parts for a 1968 Fargo A100 Van

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Power Steering Fluid and Power Steering Pump Seal Kit .

Frequently Asked Questions

How many steering parts fit the 1968 Fargo A100 Van?

Our catalog currently lists 23 steering parts for the 1968 Fargo A100 Van across 7 subcategories and 10 brands, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Each part is matched to the engine(s) it fits.

Do steering parts differ between 1968 Fargo A100 Van engines?

Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of steering problems on a 1968 Fargo A100 Van?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fargo A100 Van was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1968 Fargo A100 Van?

First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1968 Fargo A100 Van

Steering Parts for Other Fargo A100 Van Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.