The 1968 Fargo A100 Van has 17 ignition parts with verified fitment on this page — 3 part types and 10 brands, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Each part includes a manufacturer part number and application notes.
On the 1968 Fargo A100 Van, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 17 listed parts are Spark Plug (8 parts), Ignition Coil (7 parts) and Spark Plug Tube Seal (2 parts).
The 1968 Fargo A100 Van was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1968 Fargo A100 Van ignition parts are CHAMPION (5 parts), ACDELCO (3 parts) and STANDARD MOTOR PRODUCTS (2 parts), plus 7 more brands. Quality grades include Copper / Nickel, Economy and Double Platinum.
4 parts on this 1968 Fargo A100 Van page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ACDELCO U505 (Ignition Coil) and ACDELCO R44XLS (Spark Plug). Click any part number to see every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 2.8L 170cid L6 | UC12F | 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 2.8L 170cid L6 | 2IGC0056 | 🇨🇦 CA | View on Amazon | |
| SKP Fits: 2.8L 170cid L6 | SKUC12 | 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.8L 170cid L6 | UC12T | 🇨🇦 CA | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.8L 170cid L6 | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Popular Fits: 2.8L 170cid L6 | 5C1026 | 🇨🇦 CA | Requires External Resistor: YES | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.8L 170cid L6 | UC12 | 🇨🇦 CA | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
7 Ignition Coil parts are listed for the 1968 Fargo A100 Van, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 3 other brands. ACDELCO U505 carries the "Popular" badge.
In the Economy grade, FVP, HOLSTEIN, SKP and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP UC12F.
The Standard Replacement section lists 3 options from ACDELCO, WELLS and STANDARD MOTOR PRODUCTS — built to original-equipment specification. ACDELCO U505 is listed in this group.
Listed part numbers: ACDELCO U505, FVP UC12F and HOLSTEIN 2IGC0056, plus the other parts above.
Spark Plug
Summary: Notes include pre-set gaps of 0.032", 0.035", 0.039", 0.041" and 0.045". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.8L 170cid L6 | R44XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: 2.8L 170cid L6 | 322 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.041" | View on Amazon |
| CHAMPION Fits: 2.8L 170cid L6 | 302 | 🇨🇦 CA | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: 2.8L 170cid L6 | 3221 | 🇨🇦 CA | Copper Plus | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.8L 170cid L6 | 41802 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| AUTOLITE Fits: 2.8L 170cid L6 | APP65 | 🇨🇦 CA | Double PlatinumPre-Set Gap: 0.035" | View on Amazon |
| CHAMPION Fits: 2.8L 170cid L6 | 7322 | 🇨🇦 CA | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular Fits: 2.8L 170cid L6 | 3405 | 🇨🇦 CA | Platinum PowerPlug Type: RN14PMC | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
8 Spark Plug parts for the 1968 Fargo A100 Van come from 3 brands — CHAMPION, ACDELCO and AUTOLITE. The "Popular" part is ACDELCO R44XLS.
The Copper / Nickel section lists 4 options from CHAMPION and ACDELCO — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. ACDELCO R44XLS is listed in this group.
The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 3 options from ACDELCO, AUTOLITE and CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 41802 is listed in this group.
The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from CHAMPION — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. CHAMPION 3405 is listed in this group.
This group includes ACDELCO R44XLS, CHAMPION 322 and CHAMPION 302 and the remaining parts above.
Spark Plug Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.8L 170cid L6 | GS33731 | 🇨🇦 CA | Spark Plug Tube Seal KitMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.8L 170cid L6 | 181000301 | 🇨🇦 CA | Valve Cover | View on Amazon |
This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Spark Plug Tube Seal parts are listed for the 1968 Fargo A100 Van, from MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include MAHLE / CLEVITE GS33731 and VICTOR REINZ 181000301.
Buying Ignition Parts for a 1968 Fargo A100 Van
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1968 Fargo A100 Van?
Our catalog currently lists 17 ignition parts for the 1968 Fargo A100 Van across 3 subcategories and 10 brands, covering all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1968 Fargo A100 Van engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1968 Fargo A100 Van?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1968 Fargo A100 Van?
Notes on this page include pre-set gaps of 0.032", 0.035", 0.039", 0.041" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fargo A100 Van was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Fargo A100 Van?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Fargo A100 Van
Ignition Parts for Other Fargo A100 Van Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.