1969 Fiat 124 Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 1969 Fiat 124 come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 1969 Fiat 124 come from 4 brands — AJUSA, BCA, ELRING and 1 other brand.

Part numbers include AJUSA 15009700, BCA NS223035 and ELRING 212458, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 1969 Fiat 124, from KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes KING ENGINE BEARINGS CR4099AM, KING ENGINE BEARINGS CR4099XP and MAHLE / CLEVITE CB1332A.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1969 Fiat 124 — AJUSA 54013900.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 5M1442.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1969 Fiat 124 come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 1969 Fiat 124 come from 5 brands — ELRING, NATIONAL, WJB / INMOTION PARTS and 2 other brands. The "Popular" part is NATIONAL 224025.

Listed part numbers: NATIONAL 224025, WJB / INMOTION PARTS WS224025 and AJUSA 15033000, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1969 Fiat 124 — AJUSA 10020300.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1969 Fiat 124 — AJUSA 52012300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1969 Fiat 124 — AJUSA 50016300.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies the 5 Expansion Plug parts for the 1969 Fiat 124. DORMAN 565027 carries the "Popular" badge.

Part numbers include DORMAN 565027, DORMAN 555083 and DORMAN 555027, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1969 Fiat 124, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 13026200, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts for the 1969 Fiat 124 come from 6 brands — VARIOUS MFR, FAMOUS BRAND, PUROLATOR and 3 other brands. The "Popular" part is VARIOUS MFR PG4670.

The Economy section lists 3 options from VARIOUS MFR, FAMOUS BRAND and PUROLATOR — the catalog's value-priced group. VARIOUS MFR PG4670 is listed in this group.

In the Standard Replacement grade, ACDELCO, HASTINGS / BALDWIN, VARIOUS MFR and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.

Listed part numbers: VARIOUS MFR PG4670, FAMOUS BRAND 85189 and PUROLATOR L20020, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 14029900.

This table covers the Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T1822.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

2 Timing Belt parts are listed for the 1969 Fiat 124, from INA and S.A. GEAR.

This group includes INA ZBTB019 and S.A. GEAR TB019.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1969 Fiat 124 come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS3480 and SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 15826.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1969 Fiat 124 come from 4 brands — AJUSA, FEL-PRO, BECK/ARNLEY and 1 other brand. The "Popular" part is FEL-PRO VS26065C.

Listed part numbers: FEL-PRO VS26065C, AJUSA 11002700 and AJUSA 11003400, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 1969 Fiat 124 come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 553190.

This group includes ELRING 553190, AJUSA 12004500 and AJUSA 57004900 and the remaining parts above.