1972 Fiat 124 Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 1972 Fiat 124 come from 3 brands — SCHAEFFLER, NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99114, SCHAEFFLER SR3463 and SCHAEFFLER SR3536 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 1972 Fiat 124 come from 4 brands — AJUSA, BCA, ELRING and 1 other brand.

Listed part numbers: AJUSA 15009700, BCA NS223035 and ELRING 212458, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1972 Fiat 124, from KING ENGINE BEARINGS and SEALED POWER.

Listed part numbers: KING ENGINE BEARINGS CR4099AM, KING ENGINE BEARINGS CR4488AM and KING ENGINE BEARINGS CR4099XP, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 1972 Fiat 124.

Listed part numbers: AJUSA 54009800 and AJUSA 54013900.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 1972 Fiat 124 come from 2 brands — KING ENGINE BEARINGS and SEALED POWER.

Listed part numbers: KING ENGINE BEARINGS MB562AM and SEALED POWER 4659M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1972 Fiat 124 come from 5 brands — WJB / INMOTION PARTS, NATIONAL, SKF and 2 other brands. The "Popular" part is NATIONAL 99157.

Listed part numbers: NATIONAL 99157, SKF 99274 and BCA NS99157, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts for the 1972 Fiat 124 come from 6 brands — ELRING, NATIONAL, WJB / INMOTION PARTS and 3 other brands. The "Popular" part is NATIONAL 224025.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 1972 Fiat 124, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 10015600, AJUSA 10020300 and MAHLE / CLEVITE 3635, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1972 Fiat 124, from AJUSA and VICTOR REINZ.

Part numbers include AJUSA 52012300, AJUSA 52038600 and VICTOR REINZ 023180001.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1972 Fiat 124.

Part numbers include MELLING CSL1131 and MELLING CSL2231.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 1972 Fiat 124.

This group includes AJUSA 50045100 and AJUSA 50016300.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies the 5 Expansion Plug parts for the 1972 Fiat 124. DORMAN 565027 carries the "Popular" badge.

This group includes DORMAN 565027, DORMAN 555083 and DORMAN 555027 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1972 Fiat 124, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 13026200, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411043100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 1972 Fiat 124 come from 7 brands — VARIOUS MFR, BOSCH, FAMOUS BRAND and 4 other brands. The "Popular" part is VARIOUS MFR PG4670.

The Economy section lists 4 options from VARIOUS MFR, BOSCH, FAMOUS BRAND and 1 other brand — the catalog's value-priced group. VARIOUS MFR PG4670 is listed in this group.

In the Standard Replacement grade, ACDELCO, BOSCH, HASTINGS / BALDWIN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.

Listed part numbers: VARIOUS MFR PG4670, BOSCH 72137WS and FAMOUS BRAND 85189, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts for the 1972 Fiat 124 come from AJUSA.

This group includes AJUSA 14026400 and AJUSA 14029900.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 4 Piston Ring parts for the 1972 Fiat 124.

Part numbers include HASTINGS MANUFACTURING 6814, HASTINGS MANUFACTURING 2C6814 and HASTINGS MANUFACTURING 2C6814S, among others listed above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 1972 Fiat 124 come from 2 brands — ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

This group includes ITM ENGINE COMPONENTS 1T1822 and KING ENGINE BEARINGS TW113AM.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

4 Timing Belt parts are listed for the 1972 Fiat 124, from CONTINENTAL, ACDELCO and DAYCO.

Economy: 1 part, from CONTINENTAL. A representative part number is CONTINENTAL CD020.

The Standard Replacement section: 3 options from ACDELCO, CONTINENTAL and DAYCO. ACDELCO TB020 is listed in this group.

This group includes CONTINENTAL CD020, ACDELCO TB020 and CONTINENTAL 40020 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1972 Fiat 124 come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS3480 and SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 15826.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1972 Fiat 124 come from 4 brands — AJUSA, FEL-PRO, BECK/ARNLEY and 1 other brand. The "Popular" part is FEL-PRO VS26065C.

Part numbers include FEL-PRO VS26065C, AJUSA 11002700 and AJUSA 11003400, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 1972 Fiat 124 come from 3 brands — ELRING, AJUSA and SEALED POWER. The "Popular" part is ELRING 553190.

Part numbers include ELRING 553190, AJUSA 12004500 and ELRING 197378, among others listed above.