This page lists 80 engine parts for the 1974 Fiat 124, across 25 part types, covering both the 1.6L L4 and the 1.8L L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 1974 Fiat 124, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (9 parts), Expansion Plug (9 parts) and Oil Filter (9 parts). The other 22 part types cover the remaining 53 parts.
The 1974 Fiat 124 was sold with both the 1.6L L4 and the 1.8L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
25 brands supply engine parts for the 1974 Fiat 124, led by AJUSA (11 parts), SKF (6 parts) and PIONEER (6 parts), plus 22 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1974 Fiat 124. 13 parts have it, including NATIONAL 99114 (Camshaft Repair Sleeve) and BCA NS223035 (Camshaft Seal). Each part number opens a page with every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 1.8L L4 | 99114 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER Fits: 1.8L L4 | SR3463 | 🇺🇸 US 🇨🇦 CA | 11 MM Width35.56 mm Outside Diameter | View on Amazon |
| SCHAEFFLER Fits: 1.8L L4 | SR3536 | 🇺🇸 US 🇨🇦 CA | Rear3.756 In Outside Diameter | View on Amazon |
| SKF Fits: 1.8L L4 | 99114 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.181 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS99114 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
5 Camshaft Repair Sleeve parts for the 1974 Fiat 124 come from 4 brands — SCHAEFFLER, NATIONAL, SKF and 1 other brand. The "Popular" part is NATIONAL 99114.
Listed part numbers: NATIONAL 99114, SCHAEFFLER SR3463 and SCHAEFFLER SR3536, plus the other parts above.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular Fits: 1.8L L4 | NS223035 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| NATIONAL Popular Fits: 1.8L L4 | 223035 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 1.8L L4 | 15009700 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelClockwise | View on Amazon |
| ELRING Fits: 1.8L L4 | 212458 | 🇺🇸 US 🇨🇦 CA | CoupeBase Model | View on Amazon |
| SCHAEFFLER Fits: 1.8L L4 | SS2287 | 🇺🇸 US 🇨🇦 CA | 2.05" I:D X 2.05" O.D. X 0.31" Width | View on Amazon |
| SKF Fits: 1.8L L4 | 11640 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Camshaft Seal parts for the 1974 Fiat 124 come from 6 brands — BCA, NATIONAL, AJUSA and 3 other brands. The "Popular" part is BCA NS223035.
Listed part numbers: BCA NS223035, NATIONAL 223035 and AJUSA 15009700, plus the other parts above.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 1.8L L4 | CB1138AL | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 1974 Fiat 124 — MAHLE / CLEVITE CB1138AL.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 54014200 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 1974 Fiat 124 — AJUSA 54014200.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 1.8L L4 | 99157 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SKF Popular Fits: 1.8L L4 | 99274 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 2.748 In | View on Amazon |
| BCA Fits: 1.8L L4 | NS99157 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SCHAEFFLER Fits: 1.8L L4 | SR3483 | 🇺🇸 US 🇨🇦 CA | FrontFits Shaft Diameters of 1.572"-1.578" | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS99272 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS99157 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts for the 1974 Fiat 124 come from 5 brands — WJB / INMOTION PARTS, NATIONAL, SKF and 2 other brands. The "Popular" part is NATIONAL 99157.
Listed part numbers: NATIONAL 99157, SKF 99274 and BCA NS99157, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 1.8L L4 | 224025 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 1.8L L4 | WS224025 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| AJUSA Fits: 1.8L L4 | 15033000 | 🇺🇸 US 🇨🇦 CA | Fits RearBase Model | View on Amazon |
| ELRING Fits: 1.8L L4 | 513326 | 🇺🇸 US 🇨🇦 CA | Swirl Type: Left-hand Twist | View on Amazon |
| ELRING Fits: 1.8L L4 | 059790 | 🇺🇸 US 🇨🇦 CA | Material: MVQ (Silicone Elastomer)Swirl Type: RD | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 1509908 | 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 1.8L L4 | 227040 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 1.8L L4 | 27292 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS227040 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Crankshaft Seal parts for the 1974 Fiat 124 come from 6 brands — NATIONAL, WJB / INMOTION PARTS, ELRING and 3 other brands. The "Popular" part is NATIONAL 224025.
Part numbers include NATIONAL 224025, WJB / INMOTION PARTS WS224025 and AJUSA 15033000, among others listed above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 10004800 | 🇺🇸 US 🇨🇦 CA | Fits Base Model85 Bore Diameter | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | 3635 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 613180000 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts are listed for the 1974 Fiat 124, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include AJUSA 10004800, MAHLE / CLEVITE 3635 and VICTOR REINZ 613180000.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 52016700 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 023180001 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts are listed for the 1974 Fiat 124, from AJUSA and VICTOR REINZ.
Listed part numbers: AJUSA 52016700 and VICTOR REINZ 023180001.
Cylinder Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.8L L4 | CSL1107 | 🇺🇸 US 🇨🇦 CA | 3/32 IN Wall Thickness | View on Amazon |
| MELLING Fits: 1.8L L4 | CSL2207 | 🇺🇸 US 🇨🇦 CA | 1/8 IN Wall Thickness | View on Amazon |
This table covers the wear sleeves used to restore a Cylinder seal surface.
MELLING supplies both parts for the 1974 Fiat 124.
Part numbers include MELLING CSL1107 and MELLING CSL2207.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 1.8L L4 | 11401 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
This group shows a single part: KAT'S HEATERS 11401.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 50020600 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 1974 Fiat 124 — AJUSA 50020600.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 1.8L L4 | 555014 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 7/8"Metric Dia. | View on Amazon |
| DORMAN Popular Fits: 1.8L L4 | 565027 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 38.25mmMetric Dia. | View on Amazon |
| DORMAN Fits: 1.8L L4 | 555027 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 38.25mmMetric Dia. | View on Amazon |
| DORMAN Fits: 1.8L L4 | 568009 | 🇺🇸 US 🇨🇦 CA | Standard Size: 1-1/2"Metric Size: 38.5mm | View on Amazon |
| DORMAN Fits: 1.8L L4 | 116201 | 🇺🇸 US 🇨🇦 CA | 1/4"-28 | View on Amazon |
| MELLING Fits: 1.8L L4 | MPE152R | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| PIONEER Fits: 1.8L L4 | PE152R | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| PIONEER Fits: 1.8L L4 | PE152BR | 🇺🇸 US 🇨🇦 CA | Brass or Steel | View on Amazon |
| PIONEER Fits: 1.8L L4 | PE152B | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
9 Expansion Plug parts are listed for the 1974 Fiat 124, from DORMAN, PIONEER and MELLING. DORMAN 555014 carries the "Popular" badge.
Part numbers include DORMAN 555014, DORMAN 565027 and DORMAN 555027, among others listed above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 13026200 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | MS15244 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 713572200 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts are listed for the 1974 Fiat 124, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.
This group includes AJUSA 13026200, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.
O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 1.8L L4 | 411043100 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: VICTOR REINZ 411043100.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Popular Fits: 1.8L L4 | PG4670 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| BOSCH Fits: 1.8L L4 | 72137WS | 🇺🇸 US 🇨🇦 CA | Workshop Oil Filter | View on Amazon |
| FAMOUS BRAND Fits: 1.8L L4 | 85189 | 🇺🇸 US 🇨🇦 CA | Fits 2Bblor Base ModelSpider | View on Amazon |
| PUROLATOR Fits: 1.8L L4 | L20020 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 1.8L L4 | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
| BOSCH Fits: 1.8L L4 | 3402 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 1.8L L4 | LF423 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 1.8L L4 | PG4670EX | 🇺🇸 US 🇨🇦 CA | Extended LifeSpin-On | View on Amazon |
| WIX Fits: 1.8L L4 | 51189 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
9 Oil Filter parts for the 1974 Fiat 124 come from 7 brands — VARIOUS MFR, BOSCH, FAMOUS BRAND and 4 other brands. The "Popular" part is VARIOUS MFR PG4670.
The Economy section lists 4 options from VARIOUS MFR, BOSCH, FAMOUS BRAND and 1 other brand — the catalog's value-priced group. VARIOUS MFR PG4670 is listed in this group.
In the Standard Replacement grade, ACDELCO, BOSCH, HASTINGS / BALDWIN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.
Listed part numbers: VARIOUS MFR PG4670, BOSCH 72137WS and FAMOUS BRAND 85189, plus the other parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 14026400 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 14026400.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 1.8L L4 | 9516 | 🇺🇸 US | Full SetPlain Cast Top Ring | View on Amazon |
| HASTINGS MANUFACTURING Fits: 1.8L L4 | 9516S | 🇺🇸 US | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
HASTINGS MANUFACTURING supplies both parts for the 1974 Fiat 124.
Part numbers include HASTINGS MANUFACTURING 9516 and HASTINGS MANUFACTURING 9516S.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 1T2826 | 🇺🇸 US 🇨🇦 CA | CoupeSpider (Size: Standard) | View on Amazon |
This table covers the Thrust washers.
This group shows a single part: ITM ENGINE COMPONENTS 1T2826.
Timing Belt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 1.8L L4 | TB020 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| DAYCO Fits: 1.8L L4 | 95020 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.
2 Timing Belt parts are listed for the 1974 Fiat 124, from ACDELCO and DAYCO.
This group includes ACDELCO TB020 and DAYCO 95020.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 1.8L L4 | 99153 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.575 In | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
This group shows a single part: SKF 99153.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 1506301 | 🇨🇦 CA | CoupeBase Model | View on Amazon |
| SKF Fits: 1.8L L4 | 15826 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts for the 1974 Fiat 124 come from 2 brands — ITM ENGINE COMPONENTS and SKF.
Listed part numbers: ITM ENGINE COMPONENTS 1506301 and SKF 15826.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 1.8L L4 | 11002700 | 🇺🇸 US 🇨🇦 CA | Fits OuterBase Model | View on Amazon |
| FEL-PRO Popular Fits: 1.8L L4 | VS26065C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 1.8L L4 | 0360263 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 0936306 | 🇺🇸 US 🇨🇦 CA | SpiderCam Housing | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 0936302 | 🇺🇸 US 🇨🇦 CA | SpiderCam Housing Cover Lower | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 151077901 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Valve Cover Gasket parts for the 1974 Fiat 124 come from 5 brands — ITM ENGINE COMPONENTS, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is AJUSA 11002700.
Part numbers include AJUSA 11002700, FEL-PRO VS26065C and BECK/ARNLEY 0360263, among others listed above.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 1.8L L4 | PF207 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 1.8L L4 | PF224 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
PIONEER supplies both parts for the 1974 Fiat 124.
This group includes PIONEER PF207 and PIONEER PF224.
Valve Spring Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 1.8L L4 | B105 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Spring shims.
This group shows a single part: PIONEER B105.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 12004500 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
| AJUSA Fits: 1.8L L4 | 57004900 | 🇺🇸 US 🇨🇦 CA | Fits Base ModelEngine 132A7.000 | View on Amazon |
| ELRING Fits: 1.8L L4 | 197378 | 🇺🇸 US 🇨🇦 CA | Material: ACM (Polyacrylate) | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts for the 1974 Fiat 124 come from 2 brands — AJUSA and ELRING.
This group includes AJUSA 12004500, AJUSA 57004900 and ELRING 197378.
Buying Engine Parts for a 1974 Fiat 124
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Expansion Plug .
Frequently Asked Questions
How many engine parts fit the 1974 Fiat 124?
Our catalog currently lists 80 engine parts for the 1974 Fiat 124 across 25 subcategories and 25 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1974 Fiat 124 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1974 Fiat 124?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1974 Fiat 124 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1974 Fiat 124?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1974 Fiat 124
Engine Parts for Other Fiat 124 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.