1971 Fiat 124 Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1971 Fiat 124, from SCHAEFFLER, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1971 124.

This group includes NATIONAL 99114, SCHAEFFLER SR3463 and SCHAEFFLER SR3536 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts are listed for the 1971 Fiat 124, from AJUSA, BCA, ELRING and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

This group includes AJUSA 15009700, BCA NS223035 and ELRING 212458 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 1971 Fiat 124 come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. 1 part fits every engine; the other 3 are engine-specific.

This group includes KING ENGINE BEARINGS CR4099AM, KING ENGINE BEARINGS CR4099XP and MAHLE / CLEVITE CB1332A and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1971 Fiat 124 come from AJUSA. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include AJUSA 54013400 and AJUSA 54013900.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 1971 Fiat 124, from ITM ENGINE COMPONENTS and SEALED POWER. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ITM ENGINE COMPONENTS 5M1442 and SEALED POWER 4659M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 1971 Fiat 124, from WJB / INMOTION PARTS, NATIONAL, SKF and 2 other brands. NATIONAL 99157 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include NATIONAL 99157, SKF 99274 and BCA NS99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts are listed for the 1971 Fiat 124, from ELRING, NATIONAL, WJB / INMOTION PARTS and 3 other brands. NATIONAL 224025 carries the "Popular" badge. 7 parts fit every engine; the other 3 are engine-specific.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 1971 Fiat 124 come from AJUSA. 1 part fits every engine; the other 1 is engine-specific.

This group includes AJUSA 10020300 and AJUSA 10033900.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 1971 Fiat 124 come from AJUSA. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include AJUSA 52004900 and AJUSA 52012300.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1971 Fiat 124 come from MELLING.

This group includes MELLING CSL1131 and MELLING CSL2231.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1971 Fiat 124 come from AJUSA. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include AJUSA 50016300 and AJUSA 50022100.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Expansion Plug parts for the 1971 Fiat 124 come from DORMAN. The "Popular" part is DORMAN 565027. Every part fits both the 1.4L L4 and the 1.6L L4.

Listed part numbers: DORMAN 565027, DORMAN 555083 and DORMAN 555027, plus the other parts above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 13027200.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 1971 Fiat 124 come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ. Every part fits both the 1.4L L4 and the 1.6L L4.

This group includes AJUSA 13026200, MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts are listed for the 1971 Fiat 124, from VARIOUS MFR, BOSCH, FAMOUS BRAND and 4 other brands. VARIOUS MFR PG4670 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, BOSCH, FAMOUS BRAND and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4670.

The Standard Replacement section lists 5 options from ACDELCO, BOSCH, HASTINGS / BALDWIN and 2 other brands — built to original-equipment specification. ACDELCO PF53 is listed in this group.

Listed part numbers: VARIOUS MFR PG4670, BOSCH 72137WS and FAMOUS BRAND 85189, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1971 Fiat 124 — AJUSA 14029900.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1971 Fiat 124 come from 2 brands — HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS.

Listed part numbers: HASTINGS MANUFACTURING 6814, HASTINGS MANUFACTURING 2C6814 and HASTINGS MANUFACTURING 2C6814S, plus the other parts above.

This table covers the Thrust washers. Read more

One part is listed for the 1971 Fiat 124 — ITM ENGINE COMPONENTS 1T1822.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

4 Timing Belt parts for the 1971 Fiat 124 come from 3 brands — CONTINENTAL, ACDELCO and DAYCO.

The Economy section: 1 option from CONTINENTAL. CONTINENTAL CD020 is listed in this group.

Standard Replacement: 3 parts, from ACDELCO, CONTINENTAL and DAYCO. A representative part number is ACDELCO TB020.

Part numbers include CONTINENTAL CD020, ACDELCO TB020 and CONTINENTAL 40020, among others listed above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1971 Fiat 124, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS3480 and SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1971 Fiat 124 — SKF 15826.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 1971 Fiat 124, from AJUSA, FEL-PRO, BECK/ARNLEY and 1 other brand. FEL-PRO VS26065C carries the "Popular" badge.

This group includes FEL-PRO VS26065C, AJUSA 11002700 and AJUSA 11003400 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 1971 Fiat 124, from ELRING, AJUSA and SEALED POWER. ELRING 553190 carries the "Popular" badge.

This group includes ELRING 553190, AJUSA 12004500 and ELRING 197378 and the remaining parts above.