1976 Honda Accord Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts are listed for the 1976 Honda Accord, from SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER SR3460 and TIMKEN KWK99106.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts are listed for the 1976 Honda Accord, from MAHLE / CLEVITE, TIMKEN, WJB / INMOTION PARTS and 8 other brands. MAHLE / CLEVITE 66580 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 1976 Honda Accord come from 4 brands — ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

This group includes ITM ENGINE COMPONENTS 4B1951, KING ENGINE BEARINGS CR4463AM and MAHLE / CLEVITE CB1223P and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1976 Honda Accord come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS.

This group includes AJUSA 54035700, APEX ACS1002 and ITM ENGINE COMPONENTS 0920911.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 1976 Honda Accord, from KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and TOPLINE. ITM ENGINE COMPONENTS 5M9502 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB5168XP.

The Standard Replacement section lists 5 options from ITM ENGINE COMPONENTS, TOPLINE and KING ENGINE BEARINGS — built to original-equipment specification. ITM ENGINE COMPONENTS 5M9502 is listed in this group.

This group includes ITM ENGINE COMPONENTS 5M9502, KING ENGINE BEARINGS MB5168XP and KING ENGINE BEARINGS MB5168AM and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 1976 Honda Accord, from TIMKEN, NATIONAL, BCA and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, TIMKEN KWK99139 and BCA NS99139, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 1976 Honda Accord, from ITM ENGINE COMPONENTS, TIMKEN, APEX and 3 other brands. ITM ENGINE COMPONENTS 1500902 carries the "Popular" badge.

This group includes ITM ENGINE COMPONENTS 1500902, TIMKEN 3771 and APEX ABS101 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1976 Honda Accord come from 6 brands — APEX, AJUSA, ITM ENGINE COMPONENTS and 3 other brands. The "Popular" part is APEX AHG102.

Listed part numbers: APEX AHG102, AJUSA 10017700 and ITM ENGINE COMPONENTS 0940904, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 1976 Honda Accord come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS.

Listed part numbers: AJUSA 52063300, APEX AHS1002 and ITM ENGINE COMPONENTS 0910904.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 1976 Honda Accord come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS.

This group includes AJUSA 50071300, APEX AFS1002 and ITM ENGINE COMPONENTS 0900905.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 1976 Honda Accord, from BECK/ARNLEY, ITM ENGINE COMPONENTS and TOPLINE.

This group includes BECK/ARNLEY 0213136, ITM ENGINE COMPONENTS RX9194 and TOPLINE EVH8.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

11 Expansion Plug parts for the 1976 Honda Accord come from 5 brands — DORMAN, PIONEER, QUALCAST and 2 other brands. The "Popular" part is DORMAN 555100.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Intake & Exhaust Manifold Gasket Set parts for the 1976 Honda Accord come from 2 brands — AJUSA and APEX.

Part numbers include AJUSA 13064000 and APEX AMS1020.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 1976 Honda Accord come from 2 brands — FEL-PRO and ITM ENGINE COMPONENTS.

Listed part numbers: FEL-PRO MS22802 and ITM ENGINE COMPONENTS 0950908.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 1976 Honda Accord, from ITM ENGINE COMPONENTS and SBI.

Part numbers include ITM ENGINE COMPONENTS RV9193 and SBI 10078.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 1976 Honda Accord, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A2450 carries the "Popular" badge.

Part numbers include DEA / MARMON RIDE CONTROL A2450, ANCHOR 8012 and DEA / MARMON RIDE CONTROL A6523, among others listed above.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1976 Honda Accord come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts for the 1976 Honda Accord come from 2 brands — DORMAN and AJUSA.

This group includes AJUSA 22009300, DORMAN 097831CD and DORMAN 095023 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1976 Honda Accord — MOTORAD MO106.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

5 Oil Filter parts are listed for the 1976 Honda Accord, from CHAMP / LUBER-FINER, WIX, FRAM and 1 other brand. WIX 51390 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER supplies 2 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER LF75HP.

The Standard Replacement section: 3 options from WIX, FRAM and HASTINGS / BALDWIN. WIX 51390 is listed in this group.

Listed part numbers: WIX 51390, CHAMP / LUBER-FINER LF75HP and CHAMP / LUBER-FINER PH2865, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1976 Honda Accord, from AJUSA, APEX and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 14029600, APEX AOP101 and ITM ENGINE COMPONENTS 0990902.