2024 Honda Accord Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2024 Honda Accord.

Listed part numbers: AJUSA 54280700 and AJUSA 54345700.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2024 Honda Accord come from 5 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO BS40800. 1 part fits every engine; the other 6 are engine-specific.

Part numbers include FEL-PRO BS40800, MAHLE / CLEVITE 68080 and AJUSA 15097100, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2024 Honda Accord, from AJUSA and FEL-PRO.

Part numbers include AJUSA 81072000, AJUSA 81079400 and FEL-PRO ES73404.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2024 Honda Accord, from AJUSA and FEL-PRO.

This group includes AJUSA 10281100, AJUSA 10279300 and FEL-PRO 26840PT and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2024 Honda Accord.

Part numbers include AJUSA 52680600 and AJUSA 52674000.

This table covers the Engine covers. Read more

One part is listed for the 2024 Honda Accord — TECHPRO HO1228173.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2024 Honda Accord.

Listed part numbers: AJUSA 50601800 and AJUSA 50596900.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 1030539.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2024 Honda Accord, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 13293200, AJUSA 13355100 and MAHLE / CLEVITE MS20396.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 1030540.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2024 Honda Accord come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 10361, ANCHOR 10362 and DEA / MARMON RIDE CONTROL A65176, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2024 Honda Accord come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 29 parts from LIQUI MOLY, VALVOLINE, PENTOSIN and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2024 Honda Accord come from 3 brands — DORMAN, REIN and SKP. Every part fits both the 1.5L L4 Turbocharged and the 2.0L L4 ELECTRIC/GAS.

Part numbers include DORMAN 090033, DORMAN 090053 and REIN HWU0110, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2024 Honda Accord, from AJUSA and DORMAN. All of them fit every engine offered in the 2024 Accord.

This group includes AJUSA 22007400 and DORMAN 095144.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2024 Honda Accord come from 3 brands — CALORSTAT, GATES and MOTORAD. Every part fits both the 1.5L L4 Turbocharged and the 2.0L L4 ELECTRIC/GAS.

This group includes CALORSTAT OC2335, GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 2024 Honda Accord come from 11 brands — BOSCH, VARIOUS MFR, WIX and 8 other brands. The "Popular" part is WIX 57356XP. Every part fits both the 1.5L L4 Turbocharged and the 2.0L L4 ELECTRIC/GAS.

The Economy section lists 5 options from BOSCH, FRAM, FVP and 2 other brands — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, BECK/ARNLEY and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2024 Honda Accord — MAHLE / CLEVITE B33713.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MELLING M570.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2024 Honda Accord, from CLOYES, MELLING and PREFERRED COMPONENTS INC.

This group includes CLOYES C984, MELLING 1081 and PREFERRED COMPONENTS INC C7166.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC1777.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts are listed for the 2024 Honda Accord, from CLOYES, MELLING and PREFERRED COMPONENTS INC.

This group includes CLOYES 96140, CLOYES 96142 and MELLING BG7045 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2024 Honda Accord come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: MELLING BT7059 and PREFERRED COMPONENTS INC R70105.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2024 Honda Accord come from 2 brands — MAHLE / CLEVITE and SKF. 1 part fits every engine; the other 1 is engine-specific.

This group includes MAHLE / CLEVITE 68064 and SKF 16896.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2024 Honda Accord, from ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 10268, ANCHOR 10347 and DEA / MARMON RIDE CONTROL A65206 and the remaining parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2024 Honda Accord — WELLS 5S15125.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts are listed for the 2024 Honda Accord, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA JTC12681 and MAHLE / CLEVITE F33463.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

6 Turbocharger Oil Line parts for the 2024 Honda Accord come from 3 brands — GATES, SUNSONG and DORMAN. The "Popular" part is GATES TL225.

This group includes GATES TL225, GATES TL227 and DORMAN 667728 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2024 Honda Accord come from 3 brands — AJUSA, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: AJUSA 11153500, AJUSA 56102700 and FEL-PRO VS50965R, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403136.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85022000.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2024 Honda Accord — MELLING VS2499.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2024 Honda Accord, from MELLING and SBI. 1 part fits every engine; the other 1 is engine-specific.

This group includes MELLING VL1060 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts for the 2024 Honda Accord come from 4 brands — MAHLE / CLEVITE, AJUSA, SBI and 1 other brand. The "Popular" part is FEL-PRO SS702831. 2 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: FEL-PRO SS702831, MAHLE / CLEVITE SS45626 and AJUSA 57030200, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2024 Honda Accord come from 5 brands — GATES, HOLSTEIN, WELLS and 2 other brands. The "Popular" part is GATES VVS383.

The Economy section: 3 options from GATES, HOLSTEIN and WELLS. GATES VVS383 is listed in this group.

Standard Replacement: 2 parts, from ACKOJA and CLOYES. A representative part number is ACKOJA A260287.

Part numbers include GATES VVS383, HOLSTEIN 2VTS0479 and WELLS 2T1277, among others listed above.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: GATES VVS920.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: ACKOJA A260057.