2019 Honda Accord Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 2019 Honda Accord, from ENGINETECH and TOPLINE.

This group includes ENGINETECH BB1502 and TOPLINE RBH54T.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2019 Honda Accord, from AJUSA, MAHLE / CLEVITE and TOPLINE.

Part numbers include AJUSA 54280700, MAHLE / CLEVITE CS55383 and TOPLINE CBSH54.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2019 Honda Accord come from 2 brands — TOPLINE and ENGINETECH.

This group includes ENGINETECH BC1007, TOPLINE MBH54T and TOPLINE TWH54T.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2019 Honda Accord come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, NATIONAL 99157 and BCA NS99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts for the 2019 Honda Accord come from 10 brands — FEL-PRO, NATIONAL, TIMKEN and 7 other brands. The "Popular" part is FEL-PRO TCS46051.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2019 Honda Accord, from AJUSA, FEL-PRO and TOPLINE.

Listed part numbers: AJUSA 81072000, FEL-PRO ES73404 and TOPLINE HBH54T.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2019 Honda Accord, from AJUSA, APEX and FEL-PRO.

Part numbers include AJUSA 10236600, APEX AHG177 and FEL-PRO 26840PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2019 Honda Accord, from AJUSA and TOPLINE.

Listed part numbers: AJUSA 52622800 and TOPLINE HSH54TA.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2019 Honda Accord — TECHPRO HO1228159.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2019 Honda Accord, from AJUSA and TOPLINE.

This group includes AJUSA 50556500 and TOPLINE CGSH54TA.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2019 Honda Accord come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand.

Part numbers include ENGINETECH EM1021, MELLING V5839 and QUALCAST 1030539, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2019 Honda Accord, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2019 Honda Accord, from ACKOJA, ATP and PIONEER.

Part numbers include ACKOJA A260411, ATP 102139 and PIONEER DA2139.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2019 Honda Accord, from AJUSA, FEL-PRO and MAHLE / CLEVITE.

Part numbers include AJUSA 13293200, FEL-PRO MS97619 and MAHLE / CLEVITE MS20396.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2019 Honda Accord come from 3 brands — ENGINETECH, QUALCAST and TOPLINE.

Part numbers include ENGINETECH IM1022, QUALCAST 1030540 and TOPLINE IVH54L.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2019 Honda Accord come from 4 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. The "Popular" part is ANCHOR 10155.

This group includes ANCHOR 10155, DEA / MARMON RIDE CONTROL A65109 and DEA / MARMON RIDE CONTROL A65132 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300871.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2019 Honda Accord come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 29 parts.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2019 Honda Accord come from 4 brands — DORMAN, ACKOJA, REIN and 1 other brand. The "Popular" part is DORMAN 090053.

Part numbers include DORMAN 090053, ACKOJA A260253 and DORMAN 090033, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2019 Honda Accord, from DORMAN, AJUSA, APEX and 2 other brands. DORMAN 095144 carries the "Popular" badge.

This group includes DORMAN 095144, AJUSA 22007400 and APEX ADP1909 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2019 Honda Accord come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.

Part numbers include CALORSTAT OC2335, DORMAN 80985 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts for the 2019 Honda Accord come from 13 brands — BOSCH, VARIOUS MFR, WIX and 10 other brands. The "Popular" part is MOBIL M1110A.

The Economy section lists 4 options from BOSCH, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, ACKOJA and 7 other brands supply 10 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2019 Honda Accord — MAHLE / CLEVITE B33713.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2019 Honda Accord — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2019 Honda Accord, from ACKOJA, DORMAN and SPECTRA PREMIUM.

This group includes ACKOJA A260256, DORMAN 264869 and SPECTRA PREMIUM HOP42A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2019 Honda Accord come from 3 brands — ENGINETECH, MELLING and TOPLINE.

Listed part numbers: ENGINETECH EP570, MELLING M570 and TOPLINE OPH54T.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2019 Honda Accord, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2019 Honda Accord, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2019 Honda Accord — TOPLINE PAH54BE.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2019 Honda Accord — TOPLINE RSH54T.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2019 Honda Accord — CLOYES C985.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2019 Honda Accord come from 3 brands — CLOYES, INA and TOPLINE.

Part numbers include CLOYES 90985SX, CLOYES 90985S and INA ZC1777, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2019 Honda Accord, from CLOYES, MELLING and PREFERRED COMPONENTS INC. CLOYES 96142 carries the "Popular" badge.

This group includes CLOYES 96142, MELLING BG7045 and CLOYES 96140 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2019 Honda Accord come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

Part numbers include MELLING BT7059 and PREFERRED COMPONENTS INC R70105.

This table covers the Timing covers. Read more

2 Timing Cover parts are listed for the 2019 Honda Accord, from ACKOJA and SKP.

This group includes ACKOJA A260180 and SKP SKOP421.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts for the 2019 Honda Accord come from 3 brands — MAHLE / CLEVITE, SKF and VICTOR REINZ.

This group includes MAHLE / CLEVITE 68064, SKF 16896 and VICTOR REINZ 815380700.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: CLOYES S1167.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Torque Strut Mount parts are listed for the 2019 Honda Accord, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 10143 carries the "Popular" badge.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts for the 2019 Honda Accord come from 3 brands — GPD, ROTOMASTER and SKP.

Part numbers include GPD 2511606, ROTOMASTER J1160112N and SKP SK2511606.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2019 Honda Accord, from WELLS and HELLA.

Economy: 1 part, from WELLS. A representative part number is WELLS 5S15125.

The Standard Replacement section: 1 option from HELLA. HELLA 009403361 is listed in this group.

This group includes WELLS 5S15125 and HELLA 009403361.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: GATES TL262.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts are listed for the 2019 Honda Accord, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA JTC12681 and MAHLE / CLEVITE F33463.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

6 Turbocharger Oil Line parts for the 2019 Honda Accord come from 3 brands — GATES, SUNSONG and DORMAN. The "Popular" part is GATES TL225.

Part numbers include GATES TL225, GATES TL227 and DORMAN 667728, among others listed above.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Turbocharger Wastegate Solenoid / Actuator parts for the 2019 Honda Accord come from 2 brands — SKP and VEMO.

This group includes SKP SK6T52372 and VEMO V26400002.

This table covers the Valve covers. Read more

2 Valve Cover parts are listed for the 2019 Honda Accord, from APEX and SKP.

This group includes APEX VCS177 and SKP SK510A18.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2019 Honda Accord come from 5 brands — MAHLE / CLEVITE, AJUSA, APEX and 2 other brands. The "Popular" part is MAHLE / CLEVITE VS50884.

Part numbers include MAHLE / CLEVITE VS50884, AJUSA 11153500 and APEX AVC177, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2019 Honda Accord come from 3 brands — QUALCAST, SBI and TOPLINE.

Listed part numbers: QUALCAST 303136, SBI 1403136 and TOPLINE VGH43.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2019 Honda Accord — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2019 Honda Accord, from MELLING, QUALCAST and SBI.

Part numbers include MELLING VL1060, QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts for the 2019 Honda Accord come from 7 brands — MAHLE / CLEVITE, SBI, APEX and 4 other brands. The "Popular" part is APEX AVS1003.

This group includes APEX AVS1003, FEL-PRO SS702831 and AJUSA 57030200 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2019 Honda Accord come from 6 brands — DORMAN, GATES, WELLS and 3 other brands. The "Popular" part is DORMAN 916559.

The Economy section: 3 options from DORMAN, GATES and WELLS. DORMAN 916559 is listed in this group.

Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS, BECK/ARNLEY and CLOYES. A representative part number is STANDARD MOTOR PRODUCTS VVT363.

This group includes DORMAN 916559, GATES VVS383 and WELLS 2T1277 and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: GATES VVS920.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS VVT773.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

One part is listed for the 2019 Honda Accord — CLOYES VCB132.