1977 Honda Accord Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts for the 1977 Honda Accord come from 2 brands — SCHAEFFLER and TIMKEN.

This group includes SCHAEFFLER SR3460 and TIMKEN KWK99106.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts for the 1977 Honda Accord come from 11 brands — MAHLE / CLEVITE, TIMKEN, WJB / INMOTION PARTS and 8 other brands. The "Popular" part is MAHLE / CLEVITE 66580.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1977 Honda Accord, from ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: ITM ENGINE COMPONENTS 4B1951, KING ENGINE BEARINGS CR4463AM and MAHLE / CLEVITE CB1223P, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1977 Honda Accord, from AJUSA, APEX and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 54035700, APEX ACS1002 and ITM ENGINE COMPONENTS 0920911.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1977 Honda Accord come from 3 brands — KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and TOPLINE. The "Popular" part is ITM ENGINE COMPONENTS 5M9502.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS MB5168XP is listed in this group.

In the Standard Replacement grade, ITM ENGINE COMPONENTS, TOPLINE and KING ENGINE BEARINGS supply 5 parts: built to original-equipment specification. A representative part number is ITM ENGINE COMPONENTS 5M9502.

Part numbers include ITM ENGINE COMPONENTS 5M9502, KING ENGINE BEARINGS MB5168XP and KING ENGINE BEARINGS MB5168AM, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1977 Honda Accord come from 5 brands — TIMKEN, NATIONAL, BCA and 2 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139, TIMKEN KWK99139 and BCA NS99139, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 1977 Honda Accord come from 6 brands — ITM ENGINE COMPONENTS, TIMKEN, APEX and 3 other brands. The "Popular" part is ITM ENGINE COMPONENTS 1500902.

Part numbers include ITM ENGINE COMPONENTS 1500902, TIMKEN 3771 and APEX ABS101, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1977 Honda Accord, from APEX, AJUSA, ITM ENGINE COMPONENTS and 3 other brands. APEX AHG102 carries the "Popular" badge.

Listed part numbers: APEX AHG102, AJUSA 10017700 and ITM ENGINE COMPONENTS 0940904, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1977 Honda Accord, from AJUSA, APEX and ITM ENGINE COMPONENTS.

This group includes AJUSA 52063300, APEX AHS1002 and ITM ENGINE COMPONENTS 0910904.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 1977 Honda Accord, from AJUSA, APEX and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 50071300, APEX AFS1002 and ITM ENGINE COMPONENTS 0900905.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 1977 Honda Accord come from 3 brands — BECK/ARNLEY, ITM ENGINE COMPONENTS and TOPLINE.

This group includes BECK/ARNLEY 0213136, ITM ENGINE COMPONENTS RX9184 and TOPLINE EVH8.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

11 Expansion Plug parts are listed for the 1977 Honda Accord, from DORMAN, PIONEER, QUALCAST and 2 other brands. DORMAN 555100 carries the "Popular" badge.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Intake & Exhaust Manifold Gasket Set parts are listed for the 1977 Honda Accord, from AJUSA and APEX.

Part numbers include AJUSA 13064000 and APEX AMS1021.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1977 Honda Accord — ITM ENGINE COMPONENTS 0950908.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 1977 Honda Accord come from 3 brands — ITM ENGINE COMPONENTS, SBI and SEALED POWER.

Part numbers include ITM ENGINE COMPONENTS RV9193, SBI 10078 and SEALED POWER V2542.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 1977 Honda Accord come from 4 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A2450.

Part numbers include DEA / MARMON RIDE CONTROL A2450, ANCHOR 8012 and DEA / MARMON RIDE CONTROL A6523, among others listed above.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1977 Honda Accord.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 1977 Honda Accord come from 2 brands — DORMAN and AGS.

Part numbers include AGS ODP00019, DORMAN 090040 and DORMAN 65221, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 1977 Honda Accord, from DORMAN and AJUSA.

This group includes AJUSA 22009300, DORMAN 097831CD and DORMAN 095023 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO106.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

5 Oil Filter parts for the 1977 Honda Accord come from 4 brands — CHAMP / LUBER-FINER, WIX, FRAM and 1 other brand. The "Popular" part is WIX 51390.

The Economy section lists 2 options from CHAMP / LUBER-FINER — the catalog's value-priced group. CHAMP / LUBER-FINER LF75HP is listed in this group.

Standard Replacement: 3 parts, from WIX, FRAM and HASTINGS / BALDWIN. A representative part number is WIX 51390.

Listed part numbers: WIX 51390, CHAMP / LUBER-FINER LF75HP and CHAMP / LUBER-FINER PH2865, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 1977 Honda Accord come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS.

Listed part numbers: AJUSA 14029600, APEX AOP101 and ITM ENGINE COMPONENTS 0990902.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: ITM ENGINE COMPONENTS 057890.

This table covers the Oil Temperature senders. Read more

One part is listed for the 1977 Honda Accord — AUTO-TUNE PT3441.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts are listed for the 1977 Honda Accord, from ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

This group includes ITM ENGINE COMPONENTS RY2668 and MAHLE / CLEVITE 2242050.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 1977 Honda Accord — ITM ENGINE COMPONENTS 0211565.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0566012.

This table covers the Thrust washers. Read more

3 Thrust Washer parts for the 1977 Honda Accord come from 3 brands — ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and MAHLE / CLEVITE.

Part numbers include ITM ENGINE COMPONENTS 1T1952, KING ENGINE BEARINGS TW110AM and MAHLE / CLEVITE TW327S.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

3 Timing Belt parts are listed for the 1977 Honda Accord, from ITM ENGINE COMPONENTS, ACDELCO and S.A. GEAR.

Economy: 1 part, from ITM ENGINE COMPONENTS. A representative part number is ITM ENGINE COMPONENTS 4041.

The Standard Replacement section: 2 options from ACDELCO and S.A. GEAR. ACDELCO TB041 is listed in this group.

This group includes ITM ENGINE COMPONENTS 4041 and ACDELCO TB041 and the remaining parts above.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

2 Timing Belt Pulley parts for the 1977 Honda Accord come from BECK/ARNLEY.

Listed part numbers: BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Belt Tensioner parts for the 1977 Honda Accord come from 4 brands — CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES 95019 and INA ZT95019 and the remaining parts above.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: ITM ENGINE COMPONENTS 50063.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: ITM ENGINE COMPONENTS 60020.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1977 Honda Accord come from 2 brands — APEX and ITM ENGINE COMPONENTS.

This group includes APEX ATC1020, APEX ATC1021 and ITM ENGINE COMPONENTS 0980901.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1506101.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 1977 Honda Accord come from 4 brands — AJUSA, APEX, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 56015600, APEX AVC102 and ITM ENGINE COMPONENTS 0930901 and the remaining parts above.

This table covers the Valve Cover grommets. Read more

This group shows a single part: BECK/ARNLEY 0396607.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

8 Valve Guide parts for the 1977 Honda Accord come from 3 brands — ITM ENGINE COMPONENTS, TOPLINE and QUALCAST. The "Popular" part is ITM ENGINE COMPONENTS VG875CI.

Part numbers include ITM ENGINE COMPONENTS VG875CI, TOPLINE IVGH3 and ITM ENGINE COMPONENTS VG948CI, among others listed above.

This table covers the Valve seats. Read more

6 Valve Seat parts are listed for the 1977 Honda Accord, from QUALCAST, PIONEER, DURA-BOND and 1 other brand. DURA-BOND 31054 carries the "Popular" badge.

This group includes DURA-BOND 31054, QUALCAST 21125052 and PIONEER 38510 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

ITM ENGINE COMPONENTS supplies the 3 Valve Spring parts for the 1977 Honda Accord.

This group includes ITM ENGINE COMPONENTS VS1137, ITM ENGINE COMPONENTS VS1131 and ITM ENGINE COMPONENTS VS1132.

This table covers the Valve Spring retainers. Read more

One part is listed for the 1977 Honda Accord — ITM ENGINE COMPONENTS 051133.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 1977 Honda Accord — PIONEER PF234.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts for the 1977 Honda Accord come from 5 brands — AJUSA, ITM ENGINE COMPONENTS, APEX and 2 other brands. The "Popular" part is APEX AVS1002.

Listed part numbers: APEX AVS1002, ITM ENGINE COMPONENTS SS170 and AJUSA 12003900, plus the other parts above.