1987 Honda Accord Engine Parts

This table covers the camshafts that open the valves. Read more

3 Camshaft parts for the 1987 Honda Accord come from 3 brands — ITM ENGINE COMPONENTS, MELLING and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS 0564787, MELLING HSC11 and TOPLINE CAMH17.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND HA1.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1987 Honda Accord, from APEX, CONTINENTAL, FEL-PRO and 10 other brands. CONTINENTAL CS11429 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH15.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts for the 1987 Honda Accord come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE CB1353H.

The High Performance section lists 6 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1353H is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1353P.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 1987 Honda Accord come from 5 brands — APEX, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is APEX ACS1008.

Listed part numbers: APEX ACS1008, AJUSA 54036200 and FEL-PRO CS9429, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 1987 Honda Accord, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. ENGINETECH BC2200 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5168XP.

The Standard Replacement section: 7 options from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 3 other brands. ENGINETECH BC2200 is listed in this group.

Part numbers include ENGINETECH BC2200, KING ENGINE BEARINGS MB5168XP and KING ENGINE BEARINGS MB5168AM, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1987 Honda Accord, from BCA, WJB / INMOTION PARTS, NATIONAL and 2 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

21 Crankshaft Seal parts are listed for the 1987 Honda Accord, from APEX, FEL-PRO, NATIONAL and 10 other brands. APEX ABS100 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1987 Honda Accord come from 6 brands — FEL-PRO, ITM ENGINE COMPONENTS, APEX and 3 other brands. The "Popular" part is FEL-PRO 9429PT.

This group includes FEL-PRO 9429PT, ITM ENGINE COMPONENTS 0940915 and APEX AHG108 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1987 Honda Accord come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AHS1008.

This group includes APEX AHS1008, FEL-PRO HS9429PT and AJUSA 52119000 and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1987 Honda Accord come from 2 brands — ENGINETECH and SBI.

Part numbers include ENGINETECH CHS1013 and SBI 2302039.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1987 Honda Accord — KAT'S HEATERS 11411.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 1987 Honda Accord, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH EM2533 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM2533, ITM ENGINE COMPONENTS RX9261 and QUALCAST 1010193, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

7 Expansion Plug parts for the 1987 Honda Accord come from 4 brands — PIONEER, QUALCAST, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH PK917.

Part numbers include ENGINETECH PK917, PIONEER PE189B and PIONEER PE189, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 1987 Honda Accord come from 2 brands — DAYCO and DORMAN.

Part numbers include DAYCO PB1579N and DORMAN 594305.