1990 Honda Accord Engine Parts

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts for the 1990 Honda Accord come from 12 brands — GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. The "Popular" part is CLOYES B186.

The Economy section lists 4 options from CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand — the catalog's value-priced group. CLOYES B186 is listed in this group.

The High Performance section lists 1 option from GATES — engineered beyond original-equipment specification. GATES T186RB is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40186.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

11 Balance Shaft Belt Tensioner parts are listed for the 1990 Honda Accord, from CLOYES, GMB, JAPANESE OE and 8 other brands. CLOYES 95204 carries the "Popular" badge.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts for the 1990 Honda Accord come from 4 brands — BCA, CONTINENTAL, ITM ENGINE COMPONENTS and 1 other brand.

This group includes BCA NS712009, CONTINENTAL CS9021 and ITM ENGINE COMPONENTS 1500917 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND HA3.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1990 Honda Accord, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

Part numbers include SCHAEFFLER SR3461, SKF 99111 and TIMKEN KWK99111, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts are listed for the 1990 Honda Accord, from AUTO EXTRA, BCA, FEL-PRO and 11 other brands. FEL-PRO TCS45898 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1990 Honda Accord come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 3 other brands. The "Popular" part is ENGINETECH BB1520.

The High Performance section: 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. KING ENGINE BEARINGS CR4033XP is listed in this group.

Standard Replacement: 8 parts, from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 3 other brands. A representative part number is ENGINETECH BB1520.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 1990 Honda Accord come from 7 brands — APEX, ENGINETECH, AJUSA and 4 other brands. The "Popular" part is APEX ACS1014.

Part numbers include APEX ACS1014, ENGINETECH HO22CS and AJUSA 54074100, among others listed above.

This table covers the Counter Balance Shaft Seal kits. Read more

This group shows a single part: DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 1990 Honda Accord, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. ENGINETECH BC2200 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5168XP.

The Standard Replacement section: 7 options from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. ENGINETECH BC2200 is listed in this group.

Listed part numbers: ENGINETECH BC2200, KING ENGINE BEARINGS MB5168XP and MAHLE / CLEVITE MS2012P, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 1990 Honda Accord, from BCA, FEL-PRO, SCHAEFFLER and 3 other brands. BCA NS99315 carries the "Popular" badge.

This group includes BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts are listed for the 1990 Honda Accord, from VICTOR REINZ, APEX, FEL-PRO and 11 other brands. APEX ABS100 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1990 Honda Accord come from 2 brands — APEX and MAHLE / CLEVITE.

Part numbers include APEX AHB114 and MAHLE / CLEVITE GS33407.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 1990 Honda Accord come from 7 brands — ITM ENGINE COMPONENTS, FEL-PRO, ULTRA-POWER and 4 other brands. The "Popular" part is FEL-PRO 9851PT.

This group includes FEL-PRO 9851PT and AJUSA 10093000 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts for the 1990 Honda Accord come from 10 brands — ITM ENGINE COMPONENTS, VICTOR REINZ, ENGINETECH and 7 other brands. The "Popular" part is ENGINETECH HO22HSA.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1990 Honda Accord come from 2 brands — ENGINETECH and SBI.

This group includes ENGINETECH CHS1037 and SBI 2302122.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1990 Honda Accord come from MELLING.

Part numbers include MELLING CSL617 and MELLING CSL717.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1990 Honda Accord — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228119.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 1990 Honda Accord come from 6 brands — ENGINETECH, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. The "Popular" part is ENGINETECH HO22K1.

Listed part numbers: ENGINETECH HO22K1, ITM ENGINE COMPONENTS 0900958 and AJUSA 50142300, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts are listed for the 1990 Honda Accord, from ENGINETECH, MELLING, BECK/ARNLEY and 5 other brands. ENGINETECH EM2767 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM2767, MELLING V5198 and BECK/ARNLEY 0213323, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 1990 Honda Accord come from 6 brands — SKP, ATP, DAYCO and 3 other brands. The "Popular" part is SKP SK594068.

The Economy section: 1 option from SKP. SKP SK594068 is listed in this group.

Standard Replacement: 5 parts, from ATP, DAYCO, DORMAN and 2 other brands. A representative part number is ATP 102096.

Listed part numbers: SKP SK594068, ATP 102096 and DAYCO PB1189N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 1990 Honda Accord come from 8 brands — FEL-PRO, APEX, AJUSA and 5 other brands. The "Popular" part is FEL-PRO MS94781.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Plenum Gasket parts are listed for the 1990 Honda Accord, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. FEL-PRO MS947811 carries the "Popular" badge.

Part numbers include FEL-PRO MS947811, MAHLE / CLEVITE MS14159 and AJUSA 00722600, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1990 Honda Accord, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. MELLING V5197 carries the "Popular" badge.

This group includes MELLING V5197, ENGINETECH IM2660 and ITM ENGINE COMPONENTS RV9521 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

23 Motor Mount parts are listed for the 1990 Honda Accord, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 4 other brands. SKP SKMA6512 carries the "Popular" badge.

Economy: 4 parts, from SKP and FAMOUS BRAND. A representative part number is SKP SKMA6512.

The Standard Replacement section: 19 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. ANCHOR 8984 is listed in this group.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161107G.

This table covers the Motor Mount kits. Read more

One part is listed for the 1990 Honda Accord — SKP SKM3010K.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

87 Oil parts are listed for the 1990 Honda Accord, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 36 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1990 Honda Accord come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.