1991 Honda Accord Engine Parts

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts are listed for the 1991 Honda Accord, from GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. CLOYES B186 carries the "Popular" badge.

In the Economy grade, CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CLOYES B186.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T186RB.

The Standard Replacement section lists 8 options from CONTINENTAL, GATES, ACDELCO and 5 other brands — built to original-equipment specification. CONTINENTAL 40186 is listed in this group.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

11 Balance Shaft Belt Tensioner parts for the 1991 Honda Accord come from 11 brands — CLOYES, GMB, JAPANESE OE and 8 other brands. The "Popular" part is CLOYES 95204.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts are listed for the 1991 Honda Accord, from BCA, CONTINENTAL, ITM ENGINE COMPONENTS and 1 other brand.

This group includes BCA NS712009, CONTINENTAL CS9021 and ITM ENGINE COMPONENTS 1500917 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1991 Honda Accord — DURA-BOND HA3.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 1991 Honda Accord come from 4 brands — SCHAEFFLER, SKF, TIMKEN and 1 other brand.

This group includes SCHAEFFLER SR3461, SKF 99111 and TIMKEN KWK99111 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts for the 1991 Honda Accord come from 14 brands — AUTO EXTRA, BCA, FEL-PRO and 11 other brands. The "Popular" part is FEL-PRO TCS45898.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts are listed for the 1991 Honda Accord, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 3 other brands. ENGINETECH BB1520 carries the "Popular" badge.

High Performance: 3 parts, from MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS CR4033XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 3 other brands. ENGINETECH BB1520 is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 1991 Honda Accord, from APEX, ENGINETECH, AJUSA and 4 other brands. APEX ACS1014 carries the "Popular" badge.

This group includes APEX ACS1014, ENGINETECH HO22CS and AJUSA 54074100 and the remaining parts above.

This table covers the Counter Balance Shaft Seal kits. Read more

One part is listed for the 1991 Honda Accord — DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 1991 Honda Accord come from 6 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BC2200.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5168XP is listed in this group.

Standard Replacement: 7 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. A representative part number is ENGINETECH BC2200.

This group includes ENGINETECH BC2200, KING ENGINE BEARINGS MB5168XP and MAHLE / CLEVITE MS2012P and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1991 Honda Accord come from 6 brands — BCA, FEL-PRO, SCHAEFFLER and 3 other brands. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 1991 Honda Accord come from 14 brands — VICTOR REINZ, APEX, FEL-PRO and 11 other brands. The "Popular" part is APEX ABS100.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 1991 Honda Accord, from APEX and MAHLE / CLEVITE.

Part numbers include APEX AHB114 and MAHLE / CLEVITE GS33407.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 1991 Honda Accord, from ITM ENGINE COMPONENTS, FEL-PRO, ULTRA-POWER and 4 other brands. FEL-PRO 9851PT carries the "Popular" badge.

This group includes FEL-PRO 9851PT and AJUSA 10093000 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts are listed for the 1991 Honda Accord, from ITM ENGINE COMPONENTS, VICTOR REINZ, ENGINETECH and 7 other brands. ENGINETECH HO22HSA carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1991 Honda Accord, from ENGINETECH and SBI.

Listed part numbers: ENGINETECH CHS1037 and SBI 2302122.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1991 Honda Accord.

Part numbers include MELLING CSL617 and MELLING CSL717.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 1991 Honda Accord — TECHPRO HO1228119.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 1991 Honda Accord, from ENGINETECH, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. ENGINETECH HO22K1 carries the "Popular" badge.

Listed part numbers: ENGINETECH HO22K1, ITM ENGINE COMPONENTS 0900958 and AJUSA 50142300, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 1991 Honda Accord come from 8 brands — ENGINETECH, MELLING, BECK/ARNLEY and 5 other brands. The "Popular" part is ENGINETECH EM2767.

This group includes ENGINETECH EM2767, MELLING V5198 and BECK/ARNLEY 0213323 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 1991 Honda Accord, from SKP, ATP, DAYCO and 3 other brands. SKP SK594068 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SK594068.

The Standard Replacement section: 5 options from ATP, DAYCO, DORMAN and 2 other brands. ATP 102096 is listed in this group.

Part numbers include SKP SK594068, ATP 102096 and DAYCO PB1189N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts are listed for the 1991 Honda Accord, from FEL-PRO, MAHLE / CLEVITE, APEX and 5 other brands. FEL-PRO MS94781 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Plenum Gasket parts for the 1991 Honda Accord come from 5 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. The "Popular" part is BECK/ARNLEY 0374802.

Part numbers include BECK/ARNLEY 0374802, FEL-PRO MS947811 and AJUSA 00722600, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 1991 Honda Accord come from 5 brands — MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is MELLING V5197.

Listed part numbers: MELLING V5197, ENGINETECH IM2660 and ITM ENGINE COMPONENTS RV9521, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

23 Motor Mount parts for the 1991 Honda Accord come from 7 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 4 other brands. The "Popular" part is SKP SKMA6512.

The Economy section: 4 options from SKP and FAMOUS BRAND. SKP SKMA6512 is listed in this group.

Standard Replacement: 19 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. A representative part number is ANCHOR 9137.

This table covers the Motor Mount inserts. Read more

One part is listed for the 1991 Honda Accord — ENERGY SUSPENSION 161107G.

This table covers the Motor Mount kits. Read more

This group shows a single part: SKP SKM3010K.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

85 Oil parts for the 1991 Honda Accord come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 36 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1991 Honda Accord.

Listed part numbers: HAYDEN 238 and HAYDEN 153.