1998 Honda Accord Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts are listed for the 1998 Honda Accord, from SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER SR3476 and TIMKEN KWK99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1998 Honda Accord, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH37.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 1998 Honda Accord come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1025.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1025.

Part numbers include ENGINETECH BB1025, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 1998 Honda Accord come from 8 brands — APEX, ENGINETECH, AJUSA and 5 other brands. The "Popular" part is APEX ACS1040.

Part numbers include APEX ACS1040, ENGINETECH HO35CSA and AJUSA 54094400, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 1998 Honda Accord, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1537 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1998 Honda Accord, from SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS. WJB / INMOTION PARTS WS99317 carries the "Popular" badge.

Part numbers include WJB / INMOTION PARTS WS99317, SCHAEFFLER SR3549 and SCHAEFFLER SR3486, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts are listed for the 1998 Honda Accord, from ELRING, APEX, VICTOR REINZ and 11 other brands. APEX ABS128 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 1998 Honda Accord come from 8 brands — VICTOR REINZ, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is ENGINETECH HB265.

This group includes ENGINETECH HB265, FEL-PRO ES71331 and APEX AHB140 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 1998 Honda Accord come from 7 brands — FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 4 other brands. The "Popular" part is FEL-PRO 26196PT.

Part numbers include FEL-PRO 26196PT, FEL-PRO 26260PT and AJUSA 10125400, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 1998 Honda Accord come from 10 brands — ENGINETECH, FEL-PRO, APEX and 7 other brands. The "Popular" part is APEX AHS1040.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302170.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1998 Honda Accord — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228116.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 1998 Honda Accord come from 5 brands — AJUSA, APEX, ENGINETECH and 2 other brands.

Part numbers include AJUSA 50181000, APEX AFS1040 and ENGINETECH HO30K2, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 1998 Honda Accord, from ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. ENGINETECH EM4349 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1998 Honda Accord come from 4 brands — SKP, ATP, DAYCO and 1 other brand.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594300 is listed in this group.

Standard Replacement: 3 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102275.

This group includes SKP SK594300, ATP 102275 and DAYCO PB1575N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 1998 Honda Accord come from 7 brands — BECK/ARNLEY, AJUSA, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is BECK/ARNLEY 0376168.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Plenum Gasket parts are listed for the 1998 Honda Accord, from MAHLE / CLEVITE, FEL-PRO, BECK/ARNLEY and 4 other brands. FEL-PRO MS961672 carries the "Popular" badge.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

ELRING supplies the 3 Intake to Exhaust Gasket parts for the 1998 Honda Accord.

Part numbers include ELRING 463510, ELRING 463660 and ELRING 463670.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 1998 Honda Accord, from ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. ENGINETECH IM4348 carries the "Popular" badge.

Listed part numbers: ENGINETECH IM4348, MELLING V5541 and ITM ENGINE COMPONENTS RV9560, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

21 Motor Mount parts are listed for the 1998 Honda Accord, from WESTAR, SKP, ANCHOR and 5 other brands. SKP SKM9185 carries the "Popular" badge.

Economy: 5 parts, from SKP, FAMOUS BRAND and ULTRA-POWER. A representative part number is SKP SKM9185.

The Standard Replacement section: 16 options from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 8974 is listed in this group.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts are listed for the 1998 Honda Accord, from SKP, WESTAR, ANCHOR and 1 other brand. WESTAR ETK030 carries the "Popular" badge.

Listed part numbers: WESTAR ETK030, ANCHOR 300712 and DEA / MARMON RIDE CONTROL MK5503, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

71 Oil parts are listed for the 1998 Honda Accord, from VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 43 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1998 Honda Accord come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 1998 Honda Accord, from DORMAN, ELRING, AGS and 3 other brands. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.