2000 Honda Accord Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2000 Honda Accord — MAHLE / CLEVITE 67031.

This table covers the Balance shafts. Read more

2 Balance Shaft parts for the 2000 Honda Accord come from TOPLINE.

Part numbers include TOPLINE JSH36L and TOPLINE JSH36S.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

12 Balance Shaft Belt parts are listed for the 2000 Honda Accord, from GATES, CLOYES, ITM ENGINE COMPONENTS and 8 other brands. CLOYES B186 carries the "Popular" badge.

In the Economy grade, CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CLOYES B186.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T186RB.

The Standard Replacement section lists 7 options from CONTINENTAL, GATES, ACDELCO and 4 other brands — built to original-equipment specification. CONTINENTAL 40186 is listed in this group.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

9 Balance Shaft Belt Tensioner parts for the 2000 Honda Accord come from 9 brands — CLOYES, GMB, GATES and 6 other brands. The "Popular" part is CLOYES 95204.

Listed part numbers: CLOYES 95204, GMB 4358390 and GATES T41013, plus the other parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts are listed for the 2000 Honda Accord, from SKF, BCA, CONTINENTAL and 2 other brands. SKF 10584 carries the "Popular" badge.

Listed part numbers: SKF 10584, BCA NS712009 and CONTINENTAL CS9021, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 2000 Honda Accord come from 4 brands — SCHAEFFLER, SKF, TIMKEN and 1 other brand.

This group includes SCHAEFFLER SR3461, SKF 99111 and TIMKEN KWK99111 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts for the 2000 Honda Accord come from 14 brands — AUTO EXTRA, BCA, FEL-PRO and 11 other brands. The "Popular" part is FEL-PRO TCS45898.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2000 Honda Accord — TOPLINE CRH36.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2000 Honda Accord, from KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BB1536 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS CR4541XP.

The Standard Replacement section: 4 options from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BB1536 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: ENGINETECH BB1536, KING ENGINE BEARINGS CR4541XP and MAHLE / CLEVITE CB1860P, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2000 Honda Accord, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX ACS1039 carries the "Popular" badge.

Part numbers include APEX ACS1039, ENGINETECH HO22CSA and AJUSA 54094200, among others listed above.

This table covers the Counter Balance Shaft Seal kits. Read more

One part is listed for the 2000 Honda Accord — DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2000 Honda Accord come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5568AM.

The High Performance section: 2 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5568XP is listed in this group.

Standard Replacement: 8 parts, from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. A representative part number is KING ENGINE BEARINGS MB5568AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2000 Honda Accord come from 5 brands — BCA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and MAHLE / CLEVITE A354, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 2000 Honda Accord come from 13 brands — VICTOR REINZ, APEX, FEL-PRO and 10 other brands. The "Popular" part is APEX ABS100.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts are listed for the 2000 Honda Accord, from APEX, FEL-PRO, AJUSA and 5 other brands. APEX AHB139 carries the "Popular" badge.

This group includes APEX AHB139, FEL-PRO ES71329 and AJUSA 81027400 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2000 Honda Accord, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AHG139 carries the "Popular" badge.

This group includes APEX AHG139, FEL-PRO 9958PT1 and AJUSA 10125300 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 2000 Honda Accord, from FEL-PRO, ENGINETECH, APEX and 9 other brands. APEX AHS1039 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2000 Honda Accord — SBI 2302163.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 2000 Honda Accord — TECHPRO HO1228116.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2000 Honda Accord, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX AFS1039 carries the "Popular" badge.

Part numbers include APEX AFS1039, ENGINETECH HO22K6 and AJUSA 50180900, among others listed above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2000 Honda Accord — ENGINETECH RCHO23P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2000 Honda Accord come from 6 brands — ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. The "Popular" part is ENGINETECH EM4349.

This group includes ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2000 Honda Accord, from ATP, SKP, DAYCO and 1 other brand. SKP SK594187 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SK594187.

The Standard Replacement section: 4 options from ATP, DAYCO and PIONEER. ATP 102162 is listed in this group.

Part numbers include SKP SK594187, ATP 102162 and ATP 102256, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 2000 Honda Accord, from FEL-PRO, VICTOR REINZ, AJUSA and 4 other brands. FEL-PRO MS956121 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 2000 Honda Accord come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes APEX AMS1393, FEL-PRO MS93325 and MAHLE / CLEVITE MS17800 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2000 Honda Accord come from 7 brands — ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is ENGINETECH IM4348.

Listed part numbers: ENGINETECH IM4348, MELLING V5541 and ITM ENGINE COMPONENTS RV9560, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

21 Motor Mount parts for the 2000 Honda Accord come from 6 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 3 other brands. The "Popular" part is SKP SKM8801.

The Economy section: 3 options from SKP. SKP SKM8801 is listed in this group.

Standard Replacement: 18 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. A representative part number is ANCHOR 8899.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2000 Honda Accord come from 2 brands — ANCHOR and SKP.

Listed part numbers: ANCHOR 301329, ANCHOR 301330 and SKP SKM3018K.