2001 Honda Accord Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67031.

This table covers the Balance shafts. Read more

TOPLINE supplies both parts for the 2001 Honda Accord.

Part numbers include TOPLINE JSH36L and TOPLINE JSH36S.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

12 Balance Shaft Belt parts for the 2001 Honda Accord come from 11 brands — GATES, CLOYES, ITM ENGINE COMPONENTS and 8 other brands. The "Popular" part is CLOYES B186.

The Economy section lists 4 options from CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand — the catalog's value-priced group. CLOYES B186 is listed in this group.

The High Performance section lists 1 option from GATES — engineered beyond original-equipment specification. GATES T186RB is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40186.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

9 Balance Shaft Belt Tensioner parts are listed for the 2001 Honda Accord, from CLOYES, GMB, GATES and 6 other brands. CLOYES 95204 carries the "Popular" badge.

Listed part numbers: CLOYES 95204, GMB 4358390 and GATES T41013, plus the other parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 2001 Honda Accord come from 5 brands — SKF, BCA, CONTINENTAL and 2 other brands. The "Popular" part is SKF 10584.

Listed part numbers: SKF 10584, BCA NS712009 and CONTINENTAL CS9021, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 2001 Honda Accord, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

Part numbers include SCHAEFFLER SR3461, SKF 99111 and TIMKEN KWK99111, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts are listed for the 2001 Honda Accord, from AUTO EXTRA, BCA, FEL-PRO and 11 other brands. FEL-PRO TCS45898 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH36.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2001 Honda Accord come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BB1536.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS CR4541XP is listed in this group.

Standard Replacement: 4 parts, from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 1 other brand. A representative part number is ENGINETECH BB1536.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes ENGINETECH BB1536, KING ENGINE BEARINGS CR4541XP and MAHLE / CLEVITE CB1860P and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2001 Honda Accord come from 6 brands — APEX, ENGINETECH, AJUSA and 3 other brands. The "Popular" part is APEX ACS1039.

Part numbers include APEX ACS1039, ENGINETECH HO22CSA and AJUSA 54094200, among others listed above.

This table covers the Counter Balance Shaft Seal kits. Read more

This group shows a single part: DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 2001 Honda Accord, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM is listed in this group.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2001 Honda Accord, from BCA, FEL-PRO, SCHAEFFLER and 2 other brands. BCA NS99315 carries the "Popular" badge.

This group includes BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts are listed for the 2001 Honda Accord, from VICTOR REINZ, APEX, FEL-PRO and 10 other brands. APEX ABS100 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2001 Honda Accord come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHB139.

This group includes APEX AHB139, FEL-PRO ES71329 and AJUSA 81027400 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2001 Honda Accord come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG139.

Part numbers include APEX AHG139, FEL-PRO 9958PT1 and AJUSA 10125300, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts for the 2001 Honda Accord come from 12 brands — FEL-PRO, ENGINETECH, APEX and 9 other brands. The "Popular" part is APEX AHS1039.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302163.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2001 Honda Accord — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228116.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2001 Honda Accord come from 6 brands — APEX, ENGINETECH, AJUSA and 3 other brands. The "Popular" part is APEX AFS1039.

Listed part numbers: APEX AFS1039, ENGINETECH HO22K6 and AJUSA 50180900, plus the other parts above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHO23P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2001 Honda Accord, from ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. ENGINETECH EM4349 carries the "Popular" badge.

Listed part numbers: ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2001 Honda Accord come from 4 brands — ATP, SKP, DAYCO and 1 other brand. The "Popular" part is SKP SK594187.

The Economy section: 1 option from SKP. SKP SK594187 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102162.

This group includes SKP SK594187, ATP 102162 and ATP 102256 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts for the 2001 Honda Accord come from 7 brands — FEL-PRO, VICTOR REINZ, AJUSA and 4 other brands. The "Popular" part is FEL-PRO MS956121.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2001 Honda Accord, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AMS1393, FEL-PRO MS93325 and MAHLE / CLEVITE MS17800, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2001 Honda Accord, from ENGINETECH, MELLING, ITM ENGINE COMPONENTS and 4 other brands. ENGINETECH IM4348 carries the "Popular" badge.

Part numbers include ENGINETECH IM4348, MELLING V5541 and ITM ENGINE COMPONENTS RV9560, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

21 Motor Mount parts are listed for the 2001 Honda Accord, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 3 other brands. SKP SKM8801 carries the "Popular" badge.

Economy: 3 parts, from SKP. A representative part number is SKP SKM8801.

The Standard Replacement section: 18 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. ANCHOR 8899 is listed in this group.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts are listed for the 2001 Honda Accord, from ANCHOR and SKP.

This group includes ANCHOR 301329, ANCHOR 301330 and SKP SKM3018K.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

33 Oil parts are listed for the 2001 Honda Accord, from VALVOLINE, MOBIL, LUCAS OIL and 2 other brands. LIQUI MOLY 2259 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, MOBIL, LIQUI MOLY and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2001 Honda Accord come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

DORMAN supplies both parts for the 2001 Honda Accord.

This group includes DORMAN 921070 and DORMAN 921078.