2002 Honda Accord Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2002 Honda Accord — MAHLE / CLEVITE 67031.

This table covers the Balance shafts. Read more

2 Balance Shaft parts for the 2002 Honda Accord come from TOPLINE.

This group includes TOPLINE JSH36L and TOPLINE JSH36S.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts are listed for the 2002 Honda Accord, from GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. CLOYES B186 carries the "Popular" badge.

In the Economy grade, CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CLOYES B186.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T186RB.

The Standard Replacement section lists 8 options from CONTINENTAL, GATES, ACDELCO and 5 other brands — built to original-equipment specification. CONTINENTAL 40186 is listed in this group.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

10 Balance Shaft Belt Tensioner parts for the 2002 Honda Accord come from 10 brands — CLOYES, GMB, BECK/ARNLEY and 7 other brands. The "Popular" part is CLOYES 95204.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts are listed for the 2002 Honda Accord, from SKF, BCA, CONTINENTAL and 2 other brands. SKF 10584 carries the "Popular" badge.

This group includes SKF 10584, BCA NS712009 and CONTINENTAL CS9021 and the remaining parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2002 Honda Accord come from 4 brands — SCHAEFFLER, TIMKEN, SKF and 1 other brand.

Listed part numbers: SCHAEFFLER SR3461, SCHAEFFLER SR3476 and SKF 99111, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

30 Camshaft Seal parts for the 2002 Honda Accord come from 14 brands — BCA, VICTOR REINZ, FEL-PRO and 11 other brands. The "Popular" part is FEL-PRO TCS45898. A list this long means Camshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the connecting rods between each piston and the crankshaft. Read more

TOPLINE supplies both parts for the 2002 Honda Accord.

This group includes TOPLINE CRH36 and TOPLINE CRH37.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts are listed for the 2002 Honda Accord, from KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BB1536 carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS CR4541XP.

The Standard Replacement section: 9 options from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1536 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Conversion / Lower Gasket Set parts are listed for the 2002 Honda Accord, from APEX, ENGINETECH, AJUSA and 5 other brands. APEX ACS1039 carries the "Popular" badge.

This table covers the Counter Balance Shaft Seal kits. Read more

One part is listed for the 2002 Honda Accord — DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Crankshaft Main Bearing parts for the 2002 Honda Accord come from 6 brands — MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5568AM.

The High Performance section: 2 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5568XP is listed in this group.

Standard Replacement: 8 parts, from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. A representative part number is KING ENGINE BEARINGS MB5568AM.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2002 Honda Accord come from 6 brands — SCHAEFFLER, BCA, FEL-PRO and 3 other brands. The "Popular" part is BCA NS99315. 1 part fits every engine; the other 7 are engine-specific.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

42 Crankshaft Seal parts for the 2002 Honda Accord come from 15 brands — ELRING, VICTOR REINZ, APEX and 12 other brands. The "Popular" part is APEX ABS100. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

18 Cylinder Head Bolt parts are listed for the 2002 Honda Accord, from VICTOR REINZ, APEX, ENGINETECH and 6 other brands. APEX AHB139 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Cylinder Head Gasket parts are listed for the 2002 Honda Accord, from FEL-PRO, ITM ENGINE COMPONENTS, APEX and 5 other brands. APEX AHG139 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

26 Cylinder Head Gasket Set parts are listed for the 2002 Honda Accord, from ENGINETECH, FEL-PRO, APEX and 9 other brands. APEX AHS1039 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the Cylinder Head Spacer shims. Read more

SBI supplies both parts for the 2002 Honda Accord.

Part numbers include SBI 2302163 and SBI 2302170.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 2002 Honda Accord — TECHPRO HO1228116.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts are listed for the 2002 Honda Accord, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX AFS1039 carries the "Popular" badge.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2002 Honda Accord — ENGINETECH RCHO23P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2002 Honda Accord come from 6 brands — ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 3 other brands. The "Popular" part is ENGINETECH EM4349. Every part fits both the 2.3L L4 and the 3.0L V6.

Part numbers include ENGINETECH EM4349, ITM ENGINE COMPONENTS RX9558 and MELLING V5542, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

9 Harmonic Balancer parts are listed for the 2002 Honda Accord, from ATP, SKP, DAYCO and 1 other brand. SKP SK594187 carries the "Popular" badge.

Economy: 2 parts, from SKP. A representative part number is SKP SK594187.

The Standard Replacement section: 7 options from ATP, DAYCO and PIONEER. ATP 102162 is listed in this group.

This group includes SKP SK594187, SKP SK594300 and ATP 102162 and the remaining parts above.