2006 Honda Accord Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts are listed for the 2006 Honda Accord, from S.A. GEAR, MELLING and INA. MELLING 712F carries the "Popular" badge.

The Chain Only section lists 5 options from S.A. GEAR, MELLING and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. MELLING 712F is listed in this group.

In the Kit grade, INA and MELLING supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76231.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2006 Honda Accord, from S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. S.A. GEAR 7518 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570, plus the other parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Chain Tensioner parts for the 2006 Honda Accord come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING BT5569.

Listed part numbers: MELLING BT5569 and CLOYES 95569, plus the other parts above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts are listed for the 2006 Honda Accord, from MELLING, CLOYES, FVP and 2 other brands. MELLING S939 carries the "Popular" badge.

Part numbers include MELLING S939, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts for the 2006 Honda Accord come from 2 brands — SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER SR3476 and TIMKEN KWK99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 2006 Honda Accord come from 13 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2006 Honda Accord — TOPLINE CRH37.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Connecting Rod Bearing parts are listed for the 2006 Honda Accord, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 2 other brands. MAHLE / CLEVITE CB1861H carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 5 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1861H.

The Standard Replacement section lists 8 options from ENGINETECH, KING ENGINE BEARINGS, TOPLINE and 2 other brands — built to original-equipment specification. ENGINETECH BB1013 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Conversion / Lower Gasket Set parts are listed for the 2006 Honda Accord, from AJUSA, ELRING, APEX and 5 other brands. APEX ACS1049 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts for the 2006 Honda Accord come from 6 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259XPC.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 6 parts, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. A representative part number is KING ENGINE BEARINGS MB5259AM.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2006 Honda Accord come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

This group includes BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3476 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

48 Crankshaft Seal parts for the 2006 Honda Accord come from 15 brands — ELRING, VICTOR REINZ, TIMKEN and 12 other brands. The "Popular" part is FEL-PRO TCS46051. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

22 Cylinder Head Bolt parts are listed for the 2006 Honda Accord, from APEX, ENGINETECH, FEL-PRO and 6 other brands. APEX AHB149 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2006 Honda Accord, from AJUSA, APEX, FEL-PRO and 4 other brands. APEX AHG163 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

27 Cylinder Head Gasket Set parts are listed for the 2006 Honda Accord, from FEL-PRO, ENGINETECH, APEX and 6 other brands. APEX AHS1063 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2006 Honda Accord come from KAT'S HEATERS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2006 Honda Accord, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2006 Accord.

Part numbers include TECHPRO HO1228117, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2006 Honda Accord, from AJUSA, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 50304200, AJUSA 50307200 and AJUSA 50390800 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2006 Honda Accord — ENGINETECH RCHO24AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts for the 2006 Honda Accord come from 7 brands — MELLING, QUALCAST, SBI and 4 other brands. The "Popular" part is ENGINETECH EM1009.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts are listed for the 2006 Honda Accord, from ATP, DAYCO, DORMAN and 2 other brands. ATP 102235 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594267.

The Standard Replacement section: 4 options from ATP, DAYCO, DORMAN and 1 other brand. ATP 102235 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes ATP 102235, SKP SK594267 and DAYCO PB1545N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Intake Manifold Gasket parts are listed for the 2006 Honda Accord, from BECK/ARNLEY, AJUSA, VICTOR REINZ and 4 other brands. APEX AMS1530 carries the "Popular" badge.