2007 Honda Accord Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts for the 2007 Honda Accord come from 3 brands — S.A. GEAR, MELLING and INA. The "Popular" part is MELLING 712F.

In the Chain Only grade, S.A. GEAR, MELLING and INA supply 5 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is MELLING 712F.

The Kit section lists 2 options from INA and MELLING — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. INA ZC76231 is listed in this group.

Listed part numbers: MELLING 712F, S.A. GEAR C712F and INA ZCC712F, plus the other parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts for the 2007 Honda Accord come from 5 brands — S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. The "Popular" part is S.A. GEAR 7518.

Part numbers include S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570, among others listed above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Chain Tensioner parts are listed for the 2007 Honda Accord, from MELLING, CLOYES, FVP and 2 other brands. MELLING BT5569 carries the "Popular" badge.

Part numbers include MELLING BT5569 and CLOYES 95569, among others listed above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts for the 2007 Honda Accord come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING S939.

Listed part numbers: MELLING S939, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts are listed for the 2007 Honda Accord, from SCHAEFFLER and TIMKEN.

Part numbers include SCHAEFFLER SR3476 and TIMKEN KWK99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 2007 Honda Accord, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 10 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH37.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Connecting Rod Bearing parts for the 2007 Honda Accord come from 5 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 2 other brands. The "Popular" part is MAHLE / CLEVITE CB1861H.

The High Performance section lists 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1861H is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, TOPLINE and 2 other brands supply 8 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1013.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Conversion / Lower Gasket Set parts for the 2007 Honda Accord come from 8 brands — AJUSA, ELRING, APEX and 5 other brands. The "Popular" part is APEX ACS1049.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts are listed for the 2007 Honda Accord, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. KING ENGINE BEARINGS MB5259XPC carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5259XPC.

The Standard Replacement section: 6 options from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. KING ENGINE BEARINGS MB5259AM is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2007 Honda Accord, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3476, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

48 Crankshaft Seal parts are listed for the 2007 Honda Accord, from ELRING, VICTOR REINZ, TIMKEN and 12 other brands. FEL-PRO TCS46051 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

23 Cylinder Head Bolt parts for the 2007 Honda Accord come from 9 brands — APEX, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is APEX AHB149.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

17 Cylinder Head Gasket parts for the 2007 Honda Accord come from 7 brands — ELRING, AJUSA, APEX and 4 other brands. The "Popular" part is APEX AHG163.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

28 Cylinder Head Gasket Set parts for the 2007 Honda Accord come from 10 brands — FEL-PRO, ENGINETECH, APEX and 7 other brands. The "Popular" part is APEX AHS1063. A list this long means Cylinder Head Gasket Set applications vary by configuration — the notes carry the qualifiers.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2007 Honda Accord. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2007 Honda Accord come from 2 brands — TECHPRO and VARIOUS MFR. Every part fits all 3 engine options (2.4L L4, 3.0L V6 and 3.0L V6 ELECTRIC/GAS).

Listed part numbers: TECHPRO HO1228117, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts for the 2007 Honda Accord come from 4 brands — AJUSA, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

Listed part numbers: AJUSA 50304200, AJUSA 50307200 and AJUSA 50390800, plus the other parts above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHO24AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts are listed for the 2007 Honda Accord, from MELLING, QUALCAST, SBI and 4 other brands. ENGINETECH EM1009 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts for the 2007 Honda Accord come from 5 brands — ATP, DAYCO, DORMAN and 2 other brands. The "Popular" part is ATP 102235.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594267 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO, DORMAN and 1 other brand. A representative part number is ATP 102235.

3 further parts sit outside the graded sections, with the same engine-level match.

This group includes ATP 102235, SKP SK594267 and DAYCO PB1545N and the remaining parts above.