2008 Honda Accord Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts are listed for the 2008 Honda Accord, from S.A. GEAR, INA and MELLING. MELLING 712F carries the "Popular" badge.

The Chain Only section lists 5 options from S.A. GEAR, MELLING and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. MELLING 712F is listed in this group.

In the Kit grade, INA supplies 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76233.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2008 Honda Accord, from S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. S.A. GEAR 7518 carries the "Popular" badge.

This group includes S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts for the 2008 Honda Accord come from 6 brands — INA, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is INA ZT95791.

Listed part numbers: INA ZT95791, S.A. GEAR 91037 and CLOYES 95791, plus the other parts above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts are listed for the 2008 Honda Accord, from MELLING, CLOYES, FVP and 2 other brands. MELLING S939 carries the "Popular" badge.

Part numbers include MELLING S939, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2008 Honda Accord come from 5 brands — TIMKEN, BCA, NATIONAL and 2 other brands. The "Popular" part is TIMKEN KWK99147.

Listed part numbers: TIMKEN KWK99147, BCA NS99147 and NATIONAL 99147, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts for the 2008 Honda Accord come from 12 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 9 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts are listed for the 2008 Honda Accord, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 2 other brands. MAHLE / CLEVITE CB1861H carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 5 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1861H.

The Standard Replacement section lists 8 options from ENGINETECH, KING ENGINE BEARINGS, TOPLINE and 2 other brands — built to original-equipment specification. ENGINETECH BB1013 is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Conversion / Lower Gasket Set parts are listed for the 2008 Honda Accord, from AJUSA, FEL-PRO, APEX and 4 other brands. APEX ACS1050 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts for the 2008 Honda Accord come from 6 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259XPC.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 6 parts, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. A representative part number is KING ENGINE BEARINGS MB5259AM.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2008 Honda Accord come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99315, NATIONAL 99315 and WJB / INMOTION PARTS WS99315, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

48 Crankshaft Seal parts for the 2008 Honda Accord come from 16 brands — ELRING, VICTOR REINZ, TIMKEN and 13 other brands. The "Popular" part is FEL-PRO TCS46051. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

19 Cylinder Head Bolt parts are listed for the 2008 Honda Accord, from ELRING, TOPLINE, ENGINETECH and 6 other brands. ENGINETECH HB261 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

26 Cylinder Head Gasket parts are listed for the 2008 Honda Accord, from ELRING, AJUSA, APEX and 5 other brands. APEX AHG165 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

25 Cylinder Head Gasket Set parts are listed for the 2008 Honda Accord, from ENGINETECH, FEL-PRO, AJUSA and 8 other brands. APEX AHS1069 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2008 Honda Accord come from KAT'S HEATERS. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

4 Engine Cover parts are listed for the 2008 Honda Accord, from TECHPRO and VARIOUS MFR. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include TECHPRO HO1228123, TECHPRO HO1228122 and TECHPRO HO1228161, among others listed above.

This table covers the Engine Cover grommets. Read more

This group shows a single part: DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2008 Honda Accord, from AJUSA, ENGINETECH, TOPLINE and 1 other brand. ENGINETECH HO35K1 carries the "Popular" badge.

Part numbers include ENGINETECH HO35K1, AJUSA 50305800 and AJUSA 50307100, among others listed above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2008 Honda Accord — ENGINETECH RCHO35BP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts for the 2008 Honda Accord come from 7 brands — MELLING, QUALCAST, SBI and 4 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9599.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts are listed for the 2008 Honda Accord, from ATP, DAYCO, SKP and 2 other brands. SKP SK594386 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594386.

The Standard Replacement section: 4 options from ATP, DAYCO and ULTRA-POWER. ATP 102353 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SKP SK594386, ATP 102353 and ATP 102395, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2008 Honda Accord come from 2 brands — AUTOTECNICA and SKP.

Part numbers include AUTOTECNICA HA1419311 and SKP SK615106.