2012 Honda Crosstour Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts are listed for the 2012 Honda Crosstour, from PRESTONE, PEAK, VALVOLINE and 4 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2012 Crosstour.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PRESTONE, PEAK and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 6 options from BECK/ARNLEY, VALVOLINE, AISIN and 2 other brands — built to original-equipment specification. VALVOLINE 861398 is listed in this group.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

2 Coolant Hose / Pipe parts are listed for the 2012 Honda Crosstour, from CONTINENTAL and DAYCO.

This group includes CONTINENTAL 63812 and DAYCO 80401.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Coolant Hose / Pipe Seal parts for the 2012 Honda Crosstour come from 5 brands — MAHLE / CLEVITE, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is MAHLE / CLEVITE C32870.

Listed part numbers: MAHLE / CLEVITE C32870, AJUSA 16022400 and AJUSA 16022450, plus the other parts above.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts for the 2012 Honda Crosstour come from 3 brands — DORMAN, GPD and LARES. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include DORMAN 603230, GPD 2411212 and LARES 37316.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts for the 2012 Honda Crosstour come from 3 brands — CALORSTAT, DORMAN and MOTORAD. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include CALORSTAT RC0175, DORMAN 54370 and MOTORAD T135.

This table covers the Coolant Water Crossover Mounting sets. Read more

2 Coolant Water Crossover Mounting Set parts are listed for the 2012 Honda Crosstour, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE C17813 and VICTOR REINZ 181016001.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2012 Honda Crosstour come from US MOTOR WORKS.

This group includes US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts are listed for the 2012 Honda Crosstour, from MOTORAD and GATES. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include GATES 31409, MOTORAD 3124 and MOTORAD 3125.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

13 Radiator parts are listed for the 2012 Honda Crosstour, from OSC, SPECTRA PREMIUM, TYC and 4 other brands. SPECTRA PREMIUM CU2990 carries the "Popular" badge.

Economy: 1 part, from OSC. A representative part number is OSC 2990E.

The Standard Replacement section: 6 options from SPECTRA PREMIUM, TYC, AGILITY and 3 other brands. SPECTRA PREMIUM CU2990 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

6 Radiator Cap parts are listed for the 2012 Honda Crosstour, from MOTORAD, CSF, GATES and 2 other brands. CSF 4514 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

The Locking Replacement section lists 1 option from MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. MOTORAD ST37 is listed in this group.

The Standard Replacement section: 5 options from CSF, GATES, CALORSTAT and 2 other brands. CSF 4514 is listed in this group.

Part numbers include CSF 4514, MOTORAD ST37 and GATES 31412, among others listed above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

7 Radiator Fan Assembly parts for the 2012 Honda Crosstour come from 6 brands — UAC, DORMAN, TECHPRO and 3 other brands.

The Economy section: 3 options from DORMAN, TECHPRO and ULTRA-POWER. DORMAN 621357 is listed in this group.

Standard Replacement: 4 parts, from UAC, TYC and VDO / CONTINENTAL. A representative part number is TYC 601190.

Part numbers include DORMAN 621357, TECHPRO HO3115165 and ULTRA-POWER T601190, among others listed above.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

ACKOJA supplies the 3 Radiator Fan Motor parts for the 2012 Honda Crosstour.

Listed part numbers: ACKOJA A26010020, ACKOJA A26010019 and ACKOJA A26010021.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

14 Radiator Hose parts for the 2012 Honda Crosstour come from 4 brands — DAYCO, GATES, ACDELCO and 1 other brand. The "Popular" part is DAYCO 72511.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DORMAN 927241.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

17 Temperature Sender / Sensor parts are listed for the 2012 Honda Crosstour, from STANDARD MOTOR PRODUCTS, HOLSTEIN, BECK/ARNLEY and 11 other brands. STANDARD MOTOR PRODUCTS TX215T carries the "Popular" badge. 10 parts fit every engine; the other 7 are engine-specific.

Economy: 7 parts, from HOLSTEIN, STANDARD MOTOR PRODUCTS, CALORSTAT and 3 other brands. A representative part number is STANDARD MOTOR PRODUCTS TX215T.

The Standard Replacement section: 10 options from BECK/ARNLEY, STANDARD MOTOR PRODUCTS, WELLS and 6 other brands. STANDARD MOTOR PRODUCTS TX215 is listed in this group.

This table covers the Temperature Sender / Sensor O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Temperature Sender / Sensor O-Ring parts are listed for the 2012 Honda Crosstour, from APEX and FEL-PRO. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include APEX AWO2407 and FEL-PRO 72926.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

29 Thermostat parts for the 2012 Honda Crosstour come from 15 brands — MOTORAD, GATES, JAPANESE OE and 12 other brands. The "Popular" part is MOTORAD 5302170. Economy, Heavy Duty, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 23 parts.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

29 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2012 Honda Crosstour, from FEL-PRO, MAHLE / CLEVITE, APEX and 6 other brands. BECK/ARNLEY 0390115 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the housings and outlets the thermostat sits in. Read more

12 Thermostat Housing / Water Outlet parts for the 2012 Honda Crosstour come from 6 brands — MOTORAD, DORMAN, GATES and 3 other brands. The "Popular" part is DORMAN 9025190.

The Economy section: 4 options from DORMAN and GPD. DORMAN 9025190 is listed in this group.

Standard Replacement: 8 parts, from MOTORAD, GATES, BECK/ARNLEY and 1 other brand. A representative part number is MOTORAD CH5996.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

17 Water Pump parts for the 2012 Honda Crosstour come from 10 brands — FVP, AISIN, US MOTOR WORKS and 7 other brands. The "Popular" part is SKP SK1351530.

The Economy section: 7 options from FVP, US MOTOR WORKS, SKP and 2 other brands. SKP SK1351530 is listed in this group.

Standard Replacement: 10 parts, from AISIN, ACDELCO, GMB and 3 other brands. A representative part number is ACDELCO 252972.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Water Pump Gasket parts are listed for the 2012 Honda Crosstour, from FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. FEL-PRO 35738 carries the "Popular" badge.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 634850.