2012 Honda Crosstour Steering Parts

This table covers the steering knuckles that carry the hub, caliper and ball joints. Read more

4 Knuckle parts are listed for the 2012 Honda Crosstour, from APWI and DORMAN. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: APWI HO2022, APWI HO2023 and DORMAN 686000, plus the other parts above.

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

4 Power Steering Fluid parts for the 2012 Honda Crosstour come from 3 brands — LUBEGARD, EDELMANN and PRESTONE. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: EDELMANN 70695, LUBEGARD 24201 and LUBEGARD 24242, plus the other parts above.

This table covers the Power Steering Pressure hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

5 Power Steering Pressure Hose parts for the 2012 Honda Crosstour come from 3 brands — EDELMANN, SUNSONG and REIN.

Listed part numbers: EDELMANN 92665, EDELMANN 92665E and REIN PSH0552, plus the other parts above.

This table covers the Power Steering pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

4 Power Steering Pressure Sensor parts are listed for the 2012 Honda Crosstour, from ROSTRA, STANDARD MOTOR PRODUCTS, ULTRA-POWER and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ROSTRA 501488, STANDARD MOTOR PRODUCTS PSS69 and ULTRA-POWER 1S12087, plus the other parts above.

This table covers the Power Steering pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

10 Power Steering Pump parts for the 2012 Honda Crosstour come from 8 brands — AAE, TERREPOWER, LARES and 5 other brands. The "Popular" part is AAE 5760NKTB. 1 part fits every engine; the other 9 are engine-specific.

The New section lists 6 options from AAE, LARES, EDELMANN and 2 other brands — brand-new units rather than rebuilt ones. AAE 5760NKTB is listed in this group.

The Remanufactured section lists 4 options from TERREPOWER, CARDONE and MAVAL — factory-rebuilt units with new wear components. CARDONE 215494 is listed in this group.

This table covers the Power Steering Pump pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Power Steering Pump Pulley parts are listed for the 2012 Honda Crosstour, from AAE, ACKOJA and DORMAN.

Listed part numbers: AAE PU100701, ACKOJA A269672 and DORMAN 300333.

This table covers the Power Steering reservoirs. Read more

7 Power Steering Reservoir parts are listed for the 2012 Honda Crosstour, from AAE, SKP, CARDONE and 4 other brands. AAE RES0068 carries the "Popular" badge. All of them fit every engine offered in the 2012 Crosstour.

This group includes AAE RES0068, SKP SK603715 and CARDONE 3R209 and the remaining parts above.

This table covers the Power Steering Reservoir (Suction) hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Power Steering Reservoir (Suction) Hose parts for the 2012 Honda Crosstour come from 2 brands — SUNSONG and EDELMANN.

This group includes EDELMANN 81651, SUNSONG 3404323 and SUNSONG 3404603.

This table covers the Power Steering Reservoir caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Power Steering Reservoir Cap parts are listed for the 2012 Honda Crosstour, from DORMAN, SKP and ULTRA-POWER. All of them fit every engine offered in the 2012 Crosstour.

This group includes DORMAN 80983 and SKP SK80983D and the remaining parts above.

This table covers the Power Steering Return hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

14 Power Steering Return Hose parts are listed for the 2012 Honda Crosstour, from SUNSONG, EDELMANN and REIN. REIN PSH0559 carries the "Popular" badge. 5 parts fit every engine; the other 9 are engine-specific.

This table covers the fittings on a power-steering return hose. Read more

6 Power Steering Return Line End Fitting parts for the 2012 Honda Crosstour come from 3 brands — EDELMANN, FVP and SUNSONG. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include EDELMANN 39870 and EDELMANN 39124, among others listed above.

This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak. Read more

2 Rack and Pinion parts are listed for the 2012 Honda Crosstour, from MAVAL and TERREPOWER. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include MAVAL 93350M and TERREPOWER 3050192.

This table covers the rubber boots that seal the inner tie-rod joints on the rack. Read more

2 Rack and Pinion Bellow parts for the 2012 Honda Crosstour come from 2 brands — BECK/ARNLEY and MOOG. Every part fits both the 2.4L L4 and the 3.5L V6.

This group includes BECK/ARNLEY 1033090 and MOOG K150320.

This table covers the Rack and Pinion bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2012 Honda Crosstour — TRW JBU2733.

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment. Read more

25 Tie Rod End parts for the 2012 Honda Crosstour come from 12 brands — MEVOTECH, MOOG, SUSPENSIA and 9 other brands. The "Popular" part is MOOG EV801060. Every part fits both the 2.4L L4 and the 3.5L V6.

In the Daily Driver grade, MOOG, SUSPENSIA, MEVOTECH and 3 other brands supply 13 parts: grouped for everyday commuting duty. A representative part number is MOOG EV801060.

The Economy section lists 12 options from BECK/ARNLEY, FVP, DORMAN and 4 other brands — the catalog's value-priced group. BECK/ARNLEY 1017705 is listed in this group.