2012 Honda Crosstour Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts for the 2012 Honda Crosstour come from 3 brands — S.A. GEAR, INA and MELLING. The "Popular" part is MELLING 712F.

In the Chain Only grade, S.A. GEAR, MELLING and INA supply 5 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is MELLING 712F.

The Kit section lists 2 options from INA — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. INA ZC76233 is listed in this group.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts for the 2012 Honda Crosstour come from 5 brands — S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. The "Popular" part is S.A. GEAR 7518.

Listed part numbers: S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570, plus the other parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts are listed for the 2012 Honda Crosstour, from INA, S.A. GEAR, CLOYES and 3 other brands. INA ZT95791 carries the "Popular" badge.

This group includes INA ZT95791, S.A. GEAR 91037 and CLOYES 95791 and the remaining parts above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts for the 2012 Honda Crosstour come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING S939.

This group includes MELLING S939 and the remaining parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2012 Honda Crosstour, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 2012 Honda Crosstour, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 9 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts for the 2012 Honda Crosstour come from 5 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BB1013.

The High Performance section lists 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, TOPLINE and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1013.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts for the 2012 Honda Crosstour come from 7 brands — FEL-PRO, APEX, ENGINETECH and 4 other brands. The "Popular" part is APEX ACS1050.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 2012 Honda Crosstour, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1537 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1537, ENGINETECH BC1518 and ITM ENGINE COMPONENTS 4M1201, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2012 Honda Crosstour, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. 1 part fits every engine; the other 4 are engine-specific.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR4784, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

46 Crankshaft Seal parts are listed for the 2012 Honda Crosstour, from ELRING, TIMKEN, VICTOR REINZ and 11 other brands. FEL-PRO TCS46051 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts for the 2012 Honda Crosstour come from 9 brands — ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 6 other brands. The "Popular" part is ENGINETECH HB261.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

19 Cylinder Head Gasket parts for the 2012 Honda Crosstour come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG165.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

22 Cylinder Head Gasket Set parts for the 2012 Honda Crosstour come from 11 brands — FEL-PRO, ELRING, ENGINETECH and 8 other brands. The "Popular" part is APEX AHS1069.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Honda Crosstour. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine Cover grommets. Read more

One part is listed for the 2012 Honda Crosstour — DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2012 Honda Crosstour come from 4 brands — AJUSA, TOPLINE, ENGINETECH and 1 other brand.

This group includes AJUSA 50367400, AJUSA 50441500 and ENGINETECH HO24K3 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHO35BP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts are listed for the 2012 Honda Crosstour, from MELLING, QUALCAST, SBI and 4 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts for the 2012 Honda Crosstour come from 4 brands — ATP, DAYCO, SKP and 1 other brand. The "Popular" part is SKP SK594386.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594386 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102353.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: SKP SK594386, ATP 102353 and ATP 102395, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts are listed for the 2012 Honda Crosstour, from AUTOTECNICA and SKP.

Listed part numbers: AUTOTECNICA HA1419311 and SKP SK615106.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Intake Manifold Gasket parts for the 2012 Honda Crosstour come from 7 brands — BECK/ARNLEY, ELRING, APEX and 4 other brands. The "Popular" part is APEX AMS1691.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Plenum Gasket parts are listed for the 2012 Honda Crosstour, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS964093 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2012 Honda Crosstour, from MELLING, SBI, ENGINETECH and 3 other brands. MELLING V5561 carries the "Popular" badge.