2012 Honda Crosstour Automatic Transmission Parts

This table covers the vents on a transmission or axle housing. Read more

One part is listed for the 2012 Honda Crosstour — DORMAN 14161.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts for the 2012 Honda Crosstour come from DORMAN. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include DORMAN 921073, DORMAN 921067 and DORMAN 921068.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

15 Filter parts for the 2012 Honda Crosstour come from 5 brands — BECK/ARNLEY, VAICO, VARIOUS MFR and 2 other brands. The "Popular" part is VARIOUS MFR PT99442. 1 part fits every engine; the other 14 are engine-specific.

The Economy section lists 3 options from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PT99442 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY, VAICO, ATP and 1 other brand supply 12 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 0440427.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

4 Flexplate parts are listed for the 2012 Honda Crosstour, from ATP and PIONEER. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include ATP Z634, ATP Z608 and PIONEER FRA564, among others listed above.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2012 Honda Crosstour — DORMAN 090178.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: WELLS 5S9597.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts are listed for the 2012 Honda Crosstour, from BCA, NATIONAL, TIMKEN and 1 other brand. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include BCA NS221207 and NATIONAL 221207, among others listed above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts for the 2012 Honda Crosstour come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 99157. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include NATIONAL 99157, BCA NS99139 and NATIONAL 99139, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Output Shaft Seal parts for the 2012 Honda Crosstour come from 7 brands — SKF, TIMKEN, NATIONAL and 4 other brands. The "Popular" part is NATIONAL 712551. 8 parts fit every engine; the other 2 are engine-specific.

This table covers the rebuild kits for this assembly. Read more

TRANSTEC supplies the 3 Rebuild Kit parts for the 2012 Honda Crosstour. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: TRANSTEC 81000230, TRANSTEC 81000481 and TRANSTEC 81000498.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

17 Shift Solenoid parts are listed for the 2012 Honda Crosstour, from ACKOJA, ROSTRA, BECK/ARNLEY and 4 other brands. ROSTRA 520710 carries the "Popular" badge.

The Single Solenoid section lists 4 options from ROSTRA, BECK/ARNLEY and WELLS — grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. ROSTRA 520710 is listed in this group.

The Solenoid Pack / Kit section lists 1 option from STANDARD MOTOR PRODUCTS — grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TCS215 is listed in this group.

12 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts are listed for the 2012 Honda Crosstour, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Crosstour.

This group includes NATIONAL 99181 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2012 Honda Crosstour, from TIMKEN, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: NATIONAL 710868, TIMKEN 710238 and TIMKEN 710298, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

17 Transmission Fluid parts for the 2012 Honda Crosstour come from 9 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. The "Popular" part is ACDELCO 109243. 7 parts fit every engine; the other 10 are engine-specific.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

In the CVT grade, IDEMITSU supplies 2 parts: grouped under the catalog's "CVT" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30041114750.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the DW-1 grade, AISIN supplies 1 part: grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFDW1.

The Multi-Vehicle section lists 10 options from VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 2012 Honda Crosstour come from LUBEGARD. The "Popular" part is LUBEGARD 19610. Every part fits both the 2.4L L4 and the 3.5L V6.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 61910 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Transmission Mount parts are listed for the 2012 Honda Crosstour, from ANCHOR, DEA / MARMON RIDE CONTROL, BECK/ARNLEY and 3 other brands. ANCHOR 9428 carries the "Popular" badge. 4 parts fit every engine; the other 12 are engine-specific.

Economy: 2 parts, from SKP. A representative part number is SKP SKMA4584.

The Standard Replacement section: 14 options from ANCHOR, DEA / MARMON RIDE CONTROL, BECK/ARNLEY and 2 other brands. ANCHOR 9428 is listed in this group.