2014 Honda Accord Engine Parts

This table covers the chains that drive the balance shafts. Read more

3 Balance Shaft Chain parts for the 2014 Honda Accord come from 2 brands — S.A. GEAR and INA.

This group includes INA ZC1021320, S.A. GEAR C1180 and S.A. GEAR 76413P.

This table covers the guides that keep the balance-shaft chain on its path. Read more

This group shows a single part: S.A. GEAR 71262.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2014 Honda Accord — S.A. GEAR 91347.

This table covers the Balance Shaft sprockets. Read more

This group shows a single part: S.A. GEAR S1474.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2014 Honda Accord come from 3 brands — ITM ENGINE COMPONENTS, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: ITM ENGINE COMPONENTS 4B1711, MAHLE / CLEVITE CB1976A4 and TOPLINE RBH45.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2014 Honda Accord come from 4 brands — AJUSA, APEX, ELRING and 1 other brand.

Part numbers include AJUSA 54254300, APEX ACS1050 and ELRING 597490, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2014 Honda Accord — TOPLINE TWH36.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2014 Honda Accord, from SCHAEFFLER, BCA, NATIONAL and 1 other brand. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Crankshaft Seal parts are listed for the 2014 Honda Accord, from ELRING, VICTOR REINZ, FEL-PRO and 10 other brands. FEL-PRO TCS46051 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2014 Honda Accord come from 8 brands — ENGINETECH, MAHLE / CLEVITE, AJUSA and 5 other brands. The "Popular" part is ENGINETECH HB261.

Part numbers include ENGINETECH HB261, MAHLE / CLEVITE GS33604 and AJUSA 81041700, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 2014 Honda Accord come from 3 brands — AJUSA, APEX and ELRING.

Listed part numbers: AJUSA 10227800, APEX AHG178 and ELRING 335540.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2014 Honda Accord come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 52491300 and ELRING 522330.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2014 Honda Accord — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2014 Honda Accord come from TECHPRO.

Listed part numbers: TECHPRO HO1228140 and TECHPRO HO1228141.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50441900.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: ELRING 884180.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2014 Honda Accord come from 5 brands — MAHLE / CLEVITE, AJUSA, APEX and 2 other brands. The "Popular" part is MAHLE / CLEVITE MS20334.

Listed part numbers: MAHLE / CLEVITE MS20334, AJUSA 13279400 and APEX AMS1780, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Motor Mount parts are listed for the 2014 Honda Accord, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 9897 carries the "Popular" badge.

Listed part numbers: ANCHOR 9897, DEA / MARMON RIDE CONTROL A65054 and ANCHOR 10174, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2014 Honda Accord — ANCHOR 300904.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts are listed for the 2014 Honda Accord, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, PENTOSIN and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2014 Honda Accord come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2014 Honda Accord, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2014 Honda Accord come from 5 brands — DORMAN, AJUSA, ELRING and 2 other brands. The "Popular" part is DORMAN 095144.

This group includes DORMAN 095144, AJUSA 22007400 and ELRING 243600 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2014 Honda Accord, from CALORSTAT, DORMAN, GATES and 1 other brand.

This group includes CALORSTAT OC2335, DORMAN 80985 and GATES 31284 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2014 Honda Accord, from BOSCH, VARIOUS MFR, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge.

In the Economy grade, BOSCH, FVP, PRO-TEC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section lists 11 options from BOSCH, DENSO, WIX and 8 other brands — built to original-equipment specification. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2014 Honda Accord come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO ES71858 and MAHLE / CLEVITE B33713.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 Honda Accord — VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2014 Honda Accord — FEL-PRO 73196.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 77007000.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: HASTINGS MANUFACTURING 2P6025.

This table covers the Thrust washers. Read more

One part is listed for the 2014 Honda Accord — ITM ENGINE COMPONENTS 1T1001.

This table covers the Timing Cam sprockets. Read more

4 Timing Cam Sprocket parts are listed for the 2014 Honda Accord, from CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES S1030 and INA ZSS1030 and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: S.A. GEAR C1179.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

S.A. GEAR supplies both parts for the 2014 Honda Accord.

Listed part numbers: S.A. GEAR 76413T and S.A. GEAR 76413.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts for the 2014 Honda Accord come from 2 brands — S.A. GEAR and INA.

Listed part numbers: INA ZG0774, S.A. GEAR 71261 and S.A. GEAR 71260, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts are listed for the 2014 Honda Accord, from INA and S.A. GEAR.

Part numbers include INA ZT0691 and S.A. GEAR 91346.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts are listed for the 2014 Honda Accord, from ELRING and MAHLE / CLEVITE.

Listed part numbers: ELRING 703520 and MAHLE / CLEVITE JV5100.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts are listed for the 2014 Honda Accord, from ITM ENGINE COMPONENTS, MAHLE / CLEVITE and SKF.

Part numbers include ITM ENGINE COMPONENTS 1501161, MAHLE / CLEVITE 68064 and SKF 16896.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2014 Honda Accord — S.A. GEAR S1473.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2014 Honda Accord, from AJUSA, APEX, ELRING and 1 other brand.

This group includes AJUSA 56066200, APEX AVC178S and ELRING 452300 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

One part is listed for the 2014 Honda Accord — TOPLINE EVGH42F.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2014 Honda Accord — AJUSA 85022000.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2014 Honda Accord come from 2 brands — QUALCAST and SBI.

Part numbers include QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Valve Stem Seal parts are listed for the 2014 Honda Accord, from ELRING, MAHLE / CLEVITE, SBI and 6 other brands. APEX AVS1003 carries the "Popular" badge.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2014 Honda Accord, from DORMAN, ULTRA-POWER, GATES and 8 other brands. DORMAN 918161 carries the "Popular" badge.

Economy: 8 parts, from DORMAN, ULTRA-POWER, GATES and 5 other brands. A representative part number is DORMAN 918161.

The Standard Replacement section: 3 options from ACKOJA, CLOYES and STANDARD MOTOR PRODUCTS. ACKOJA A260230 is listed in this group.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Variable Valve Timing (VVT) Solenoid Filter parts are listed for the 2014 Honda Accord, from DORMAN, AJUSA, FEL-PRO and 2 other brands. DORMAN 917174 carries the "Popular" badge.

Listed part numbers: DORMAN 917174, AJUSA 01156600 and FEL-PRO ES73320, plus the other parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 469100.