2012 Hyundai Veloster Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 2012 Hyundai Veloster come from 2 brands — HYUNDAI and SKP.

Listed part numbers: HYUNDAI 241002B660 and SKP SKES1558.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2012 Hyundai Veloster come from 2 brands — HYUNDAI and TOPLINE.

This group includes HYUNDAI 235102B010 and TOPLINE CRHY22.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2012 Hyundai Veloster come from 5 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BB1430.

This group includes ENGINETECH BB1430, ITM ENGINE COMPONENTS 4B1631 and KING ENGINE BEARINGS CR4575SM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2012 Hyundai Veloster come from 6 brands — AJUSA, ENGINETECH, APEX and 3 other brands. The "Popular" part is AJUSA 54244600.

This group includes AJUSA 54244600, ENGINETECH HY16CSB and APEX ACS13014 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSHY22L.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2012 Hyundai Veloster, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BC1017 carries the "Popular" badge.

Part numbers include ENGINETECH BC1017, ITM ENGINE COMPONENTS 5M9386 and KING ENGINE BEARINGS MB5706SI, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

One part is listed for the 2012 Hyundai Veloster — WJB / INMOTION PARTS WS99103.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts are listed for the 2012 Hyundai Veloster, from VICTOR REINZ, FEL-PRO, NATIONAL and 5 other brands. FEL-PRO TCS46166 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2012 Hyundai Veloster come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 81061400, APEX AHB1326 and FEL-PRO ES72497, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2012 Hyundai Veloster come from 7 brands — ELRING, FEL-PRO, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is FEL-PRO 26554PT.

This group includes FEL-PRO 26554PT, ITM ENGINE COMPONENTS 0941132 and AJUSA 10197100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2012 Hyundai Veloster come from 8 brands — ELRING, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is APEX AHS13026.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Hyundai Veloster.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2012 Hyundai Veloster come from TECHPRO.

This group includes TECHPRO HY1228224 and TECHPRO HY1228225.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2012 Hyundai Veloster come from 5 brands — ELRING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH HY16K1.

Listed part numbers: ENGINETECH HY16K1, ITM ENGINE COMPONENTS 0900322 and AJUSA 50425600, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2012 Hyundai Veloster, from MELLING, HYUNDAI, ITM ENGINE COMPONENTS and 2 other brands. MELLING V5566 carries the "Popular" badge.

This group includes MELLING V5566, HYUNDAI 222122B000 and ITM ENGINE COMPONENTS RX9229 and the remaining parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2012 Hyundai Veloster come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS GDF401 and WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2012 Hyundai Veloster come from 4 brands — ATP, HL MANDO, PIONEER and 1 other brand.

Part numbers include ATP 102357, HL MANDO 30A5006 and PIONEER DA7042, among others listed above.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2012 Hyundai Veloster — MARELLI PHP1009.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMA147.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2012 Hyundai Veloster come from 7 brands — ELRING, APEX, FEL-PRO and 4 other brands. The "Popular" part is APEX AMS13140.

Part numbers include APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2012 Hyundai Veloster, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. MELLING V5564 carries the "Popular" badge.

Listed part numbers: MELLING V5564, ENGINETECH V2200 and ITM ENGINE COMPONENTS RV9295, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2012 Hyundai Veloster, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. SKP SKM9797 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM9797.

The Standard Replacement section lists 5 options from ANCHOR, DEA / MARMON RIDE CONTROL, HYUNDAI and 2 other brands — built to original-equipment specification. ANCHOR 9797 is listed in this group.

This group includes SKP SKM9797, ANCHOR 9797 and DEA / MARMON RIDE CONTROL A71004 and the remaining parts above.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts are listed for the 2012 Hyundai Veloster, from WESTAR and ANCHOR.

Listed part numbers: ANCHOR 300191, WESTAR ETK073 and WESTAR ETK072.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

102 Oil parts are listed for the 2012 Hyundai Veloster, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 60 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2012 Hyundai Veloster come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2012 Hyundai Veloster, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2012 Hyundai Veloster come from 4 brands — DORMAN, ELRING, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

This group includes DORMAN 095147, DORMAN 995147CD and ELRING 726760 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2012 Hyundai Veloster, from CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 453020.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2012 Hyundai Veloster, from BOSCH, VARIOUS MFR, WIX and 13 other brands. WIX 51334XP carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FRAM, FVP and 2 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section: 13 options from HYUNDAI, BOSCH, DENSO and 9 other brands. BOSCH 3312 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts for the 2012 Hyundai Veloster come from 7 brands — SKP, ULTRA-POWER, ACKOJA and 4 other brands. The "Popular" part is SKP SKHYP18A.

Part numbers include SKP SKHYP18A, ULTRA-POWER 264464 and ACKOJA A532802, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2012 Hyundai Veloster, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO OS30965 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts are listed for the 2012 Hyundai Veloster, from ULTRA-POWER, ENGINETECH, MELLING and 1 other brand.

Economy: 1 part, from ULTRA-POWER. A representative part number is ULTRA-POWER M526.

The Standard Replacement section: 3 options from ENGINETECH, MELLING and TOPLINE. ENGINETECH EP2215 is listed in this group.

Listed part numbers: ULTRA-POWER M526 and ENGINETECH EP2215, plus the other parts above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

3 Oil Pump Pickup Tube / Screen parts for the 2012 Hyundai Veloster come from 2 brands — HYUNDAI and MELLING.

Part numbers include HYUNDAI 262502B030, HYUNDAI 262502B000 and MELLING 403S.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2012 Hyundai Veloster come from 3 brands — ENGINETECH, ITM ENGINE COMPONENTS and TOPLINE.

In the Premium grade, ENGINETECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P15124.

Standard Replacement: 2 parts, from ITM ENGINE COMPONENTS and TOPLINE. A representative part number is ITM ENGINE COMPONENTS RY6648.

This group includes ENGINETECH P15124, ENGINETECH K15124P and ITM ENGINE COMPONENTS RY6648 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2012 Hyundai Veloster come from 4 brands — HASTINGS MANUFACTURING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is HASTINGS MANUFACTURING 2C4504.

Premium: 1 part, from ENGINETECH. A representative part number is ENGINETECH M30314.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4504.

Listed part numbers: HASTINGS MANUFACTURING 2C4504, ENGINETECH M30314 and HASTINGS MANUFACTURING 2C4504S, plus the other parts above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts are listed for the 2012 Hyundai Veloster, from ENGINETECH and ITM ENGINE COMPONENTS.

Listed part numbers: ENGINETECH TW1017 and ITM ENGINE COMPONENTS 1T4314.

This table covers the Timing Belt & component kits. Read more

One part is listed for the 2012 Hyundai Veloster — ACKOJA A530202.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2012 Hyundai Veloster come from 5 brands — CLOYES, HYUNDAI, INA and 2 other brands. The "Popular" part is CLOYES C967.

This group includes CLOYES C967, HYUNDAI 243212B620 and INA ZCC1083 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

10 Timing Chain & Component Kit parts are listed for the 2012 Hyundai Veloster, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 5 other brands. CLOYES 90967S carries the "Popular" badge.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC TS15124.

The Standard Replacement section: 8 options from CLOYES, MELLING, ACKOJA and 3 other brands. CLOYES 90967S is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.