2016 Hyundai Veloster Engine Parts

This table covers the camshafts that open the valves. Read more

3 Camshaft parts for the 2016 Hyundai Veloster come from 2 brands — HYUNDAI and SKP. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: HYUNDAI 241002B660, HYUNDAI 242002B760 and SKP SKES1558.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts for the 2016 Hyundai Veloster come from 2 brands — TOPLINE and HYUNDAI.

Part numbers include HYUNDAI 235102B010, TOPLINE CRHY22 and TOPLINE CRHY22T.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2016 Hyundai Veloster come from 5 brands — TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BB1430. 4 parts fit every engine; the other 2 are engine-specific.

This group includes ENGINETECH BB1430, KING ENGINE BEARINGS CR4575SM and ITM ENGINE COMPONENTS 4B1631 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2016 Hyundai Veloster come from 8 brands — AJUSA, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is AJUSA 54244600. 4 parts fit every engine; the other 4 are engine-specific.

This group includes AJUSA 54244600, ENGINETECH HY16CSB and FEL-PRO CS26554 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2016 Hyundai Veloster come from TOPLINE.

This group includes TOPLINE CSHY22L and TOPLINE CSHY22T.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 2016 Hyundai Veloster, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. ENGINETECH BC1017 carries the "Popular" badge. 5 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: ENGINETECH BC1017, ITM ENGINE COMPONENTS 5M9386 and KING ENGINE BEARINGS MB5706SI, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

One part is listed for the 2016 Hyundai Veloster — WJB / INMOTION PARTS WS99103.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts are listed for the 2016 Hyundai Veloster, from VICTOR REINZ, FEL-PRO, NATIONAL and 6 other brands. FEL-PRO TCS46166 carries the "Popular" badge. 15 parts fit every engine; the other 2 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2016 Hyundai Veloster come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand. Every part fits both the 1.6L L4 and the 1.6L L4 Turbocharged.

Listed part numbers: AJUSA 81061400, APEX AHB1326 and FEL-PRO ES72497, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts for the 2016 Hyundai Veloster come from 8 brands — APEX, ITM ENGINE COMPONENTS, AJUSA and 5 other brands. The "Popular" part is APEX AHG1326. 1 part fits every engine; the other 12 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts for the 2016 Hyundai Veloster come from 10 brands — ENGINETECH, ELRING, MAHLE / CLEVITE and 7 other brands. The "Popular" part is APEX AHS13026. 2 parts fit every engine; the other 16 are engine-specific.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2016 Hyundai Veloster. All of them fit every engine offered in the 2016 Veloster.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

5 Engine Cover parts for the 2016 Hyundai Veloster come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO KI1228191. 3 parts fit every engine; the other 2 are engine-specific.

Part numbers include TECHPRO KI1228191, TECHPRO KI1228192 and TECHPRO HY1228224, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Engine Kit Gasket Set parts for the 2016 Hyundai Veloster come from 5 brands — AJUSA, ELRING, TOPLINE and 2 other brands. The "Popular" part is ENGINETECH HY16K1. 2 parts fit every engine; the other 6 are engine-specific.

Listed part numbers: ENGINETECH HY16K1, HYUNDAI 209202BU02 and AJUSA 50425600, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2016 Hyundai Veloster, from HYUNDAI, ITM ENGINE COMPONENTS, MELLING and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: HYUNDAI 222122B000, ITM ENGINE COMPONENTS RX9229 and MELLING V5566, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS GDF401.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts for the 2016 Hyundai Veloster come from 6 brands — HYUNDAI, HL MANDO, ACKOJA and 3 other brands. The "Popular" part is HL MANDO 30A5006. 4 parts fit every engine; the other 3 are engine-specific.

This group includes HL MANDO 30A5006, HYUNDAI 231242B020 and HYUNDAI 231232B720 and the remaining parts above.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2016 Hyundai Veloster — MARELLI PHP1009.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2016 Hyundai Veloster — ACKOJA A520166.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMA147.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2016 Hyundai Veloster come from 7 brands — ELRING, APEX, FEL-PRO and 4 other brands. The "Popular" part is APEX AMS13140. 6 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2016 Hyundai Veloster, from MELLING, ENGINETECH, HYUNDAI and 2 other brands. MELLING V5564 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: MELLING V5564, ENGINETECH V2200 and HYUNDAI 222112B400, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 2016 Hyundai Veloster, from SKP, ULTRA-POWER, ANCHOR and 2 other brands. ANCHOR 9797 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

In the Economy grade, SKP and ULTRA-POWER supply 2 parts: the catalog's value-priced group. A representative part number is SKP SKM9797.

The Standard Replacement section lists 3 options from ANCHOR, DEA / MARMON RIDE CONTROL and HYUNDAI — built to original-equipment specification. ANCHOR 9797 is listed in this group.

Listed part numbers: ANCHOR 9797, SKP SKM9797 and ULTRA-POWER A71004, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2016 Hyundai Veloster — ANCHOR 300191.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

109 Oil parts are listed for the 2016 Hyundai Veloster, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 65 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

7 Oil Cooler parts are listed for the 2016 Hyundai Veloster, from AUTOTECNICA, ACKOJA, DORMAN and 4 other brands. AUTOTECNICA HY1419308 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

This group includes AUTOTECNICA HY1419308, ACKOJA A52600008 and DORMAN 918908 and the remaining parts above.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2016 Hyundai Veloster, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge. 6 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2016 Hyundai Veloster come from 5 brands — DORMAN, AJUSA, ELRING and 2 other brands. The "Popular" part is DORMAN 095147. 3 parts fit every engine; the other 3 are engine-specific.

Part numbers include DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2016 Hyundai Veloster, from CALORSTAT, GATES, MOTORAD and 1 other brand. All of them fit every engine offered in the 2016 Veloster.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 453020.