2015 Hyundai Veloster Engine Parts

This table covers the camshafts that open the valves. Read more

3 Camshaft parts are listed for the 2015 Hyundai Veloster, from HYUNDAI and SKP. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: HYUNDAI 241002B660, HYUNDAI 242002B760 and SKP SKES1558.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts are listed for the 2015 Hyundai Veloster, from TOPLINE and HYUNDAI.

This group includes HYUNDAI 235102B010, TOPLINE CRHY22 and TOPLINE CRHY22T.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2015 Hyundai Veloster, from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB1430 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

This group includes ENGINETECH BB1430, KING ENGINE BEARINGS CR4575SM and ITM ENGINE COMPONENTS 4B1631 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2015 Hyundai Veloster, from AJUSA, ENGINETECH, FEL-PRO and 5 other brands. AJUSA 54244600 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

Part numbers include AJUSA 54244600, ENGINETECH HY16CSB and FEL-PRO CS26554, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies both parts for the 2015 Hyundai Veloster.

Listed part numbers: TOPLINE CSHY22L and TOPLINE CSHY22T.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2015 Hyundai Veloster come from 5 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BC1017. 5 parts fit every engine; the other 2 are engine-specific.

This group includes ENGINETECH BC1017, ITM ENGINE COMPONENTS 5M9386 and KING ENGINE BEARINGS MB5706SI and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

This group shows a single part: WJB / INMOTION PARTS WS99103.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts for the 2015 Hyundai Veloster come from 9 brands — VICTOR REINZ, FEL-PRO, NATIONAL and 6 other brands. The "Popular" part is FEL-PRO TCS46166. 15 parts fit every engine; the other 2 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts are listed for the 2015 Hyundai Veloster, from AJUSA, APEX, FEL-PRO and 1 other brand. All of them fit every engine offered in the 2015 Veloster.

Listed part numbers: AJUSA 81061400, APEX AHB1326 and FEL-PRO ES72497, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2015 Hyundai Veloster, from MAHLE / CLEVITE, APEX, ITM ENGINE COMPONENTS and 5 other brands. APEX AHG1326 carries the "Popular" badge. 1 part fits every engine; the other 13 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

19 Cylinder Head Gasket Set parts are listed for the 2015 Hyundai Veloster, from ENGINETECH, MAHLE / CLEVITE, ELRING and 7 other brands. APEX AHS13026 carries the "Popular" badge. 2 parts fit every engine; the other 17 are engine-specific.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2015 Hyundai Veloster come from KAT'S HEATERS. Every part fits both the 1.6L L4 and the 1.6L L4 Turbocharged.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

5 Engine Cover parts are listed for the 2015 Hyundai Veloster, from TECHPRO and VARIOUS MFR. TECHPRO KI1228191 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

Part numbers include TECHPRO KI1228191, TECHPRO KI1228192 and TECHPRO HY1228224, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2015 Hyundai Veloster, from AJUSA, ELRING, TOPLINE and 3 other brands. ENGINETECH HY16K1 carries the "Popular" badge. 3 parts fit every engine; the other 6 are engine-specific.

Part numbers include ENGINETECH HY16K1, ITM ENGINE COMPONENTS 0900322 and AJUSA 50425600, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2015 Hyundai Veloster come from 5 brands — ITM ENGINE COMPONENTS, HYUNDAI, MELLING and 2 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9229. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: ITM ENGINE COMPONENTS RX9229, HYUNDAI 222122B000 and MELLING V5566, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2015 Hyundai Veloster — STANDARD MOTOR PRODUCTS GDF401.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2015 Hyundai Veloster, from HL MANDO, HYUNDAI, ACKOJA and 3 other brands. HL MANDO 30A5006 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: HL MANDO 30A5006, HYUNDAI 231232B720 and ACKOJA A530602, plus the other parts above.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MARELLI PHP1009.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ACKOJA A520166.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2015 Hyundai Veloster — STANDARD MOTOR PRODUCTS IMA147.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2015 Hyundai Veloster, from ELRING, APEX, FEL-PRO and 4 other brands. APEX AMS13140 carries the "Popular" badge. 6 parts fit every engine; the other 2 are engine-specific.

Part numbers include APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2015 Hyundai Veloster come from 6 brands — ENGINETECH, MELLING, HYUNDAI and 3 other brands. The "Popular" part is ENGINETECH V2200. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: ENGINETECH V2200, MELLING V5564 and HYUNDAI 222112B400, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2015 Hyundai Veloster come from 5 brands — SKP, ULTRA-POWER, ANCHOR and 2 other brands. The "Popular" part is ANCHOR 9797. 4 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 2 options from SKP and ULTRA-POWER — the catalog's value-priced group. SKP SKM9797 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL and HYUNDAI supply 3 parts: built to original-equipment specification. A representative part number is ANCHOR 9797.

Listed part numbers: ANCHOR 9797, SKP SKM9797 and ULTRA-POWER A71004, plus the other parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300191.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

121 Oil parts for the 2015 Hyundai Veloster come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

6 Oil Cooler parts for the 2015 Hyundai Veloster come from 6 brands — HYUNDAI, STANDARD MOTOR PRODUCTS, ACKOJA and 3 other brands. The "Popular" part is HYUNDAI 264102B740. 3 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: HYUNDAI 264102B740, STANDARD MOTOR PRODUCTS OCK29 and ACKOJA A52600008, plus the other parts above.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2015 Hyundai Veloster come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is DORMAN 090033. 6 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.