2020 Hyundai Veloster Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2020 Hyundai Veloster — TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 2020 Hyundai Veloster, from ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH BB1100 and TOPLINE RBHY23.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2020 Hyundai Veloster, from MAHLE / CLEVITE and TOPLINE.

This group includes MAHLE / CLEVITE CS55000 and TOPLINE CBSHY23.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2020 Hyundai Veloster — TOPLINE CSHY23S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2020 Hyundai Veloster come from 2 brands — TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BC1101, TOPLINE TWHY23 and TOPLINE MBHY23L.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2020 Hyundai Veloster come from 3 brands — MAHLE / CLEVITE, TIMKEN and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 68022, MAHLE / CLEVITE JV5250 and TIMKEN SL260113, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2020 Hyundai Veloster, from ENGINETECH, APEX, FEL-PRO and 2 other brands. ENGINETECH HB307 carries the "Popular" badge.

Listed part numbers: ENGINETECH HB307, APEX AHB1328 and FEL-PRO ES73257, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2020 Hyundai Veloster, from APEX, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: APEX AHG1427, FEL-PRO 26841PT and MAHLE / CLEVITE 55397.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2020 Hyundai Veloster, from ENGINETECH, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: ENGINETECH HY20HSG, MAHLE / CLEVITE HS55397A and TOPLINE HSHY23N.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2020 Hyundai Veloster — TOPLINE CGSHY23N.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2020 Hyundai Veloster come from 3 brands — HYUNDAI, MELLING and TOPLINE.

This group includes HYUNDAI 222122E000, MELLING V5571 and TOPLINE EVHY23.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2020 Hyundai Veloster, from HYUNDAI, ATP, DAYCO and 2 other brands. HYUNDAI 231242E000 carries the "Popular" badge.

Listed part numbers: HYUNDAI 231242E000, ATP 102358 and DAYCO PB1762N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Hyundai Veloster — MAHLE / CLEVITE MS20453.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2020 Hyundai Veloster — STANDARD MOTOR PRODUCTS IMRC23.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2020 Hyundai Veloster come from 4 brands — ENGINETECH, HYUNDAI, MELLING and 1 other brand.

Part numbers include ENGINETECH V1794, HYUNDAI 222112E400 and MELLING V5565, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2020 Hyundai Veloster come from 5 brands — ANCHOR, ACKOJA, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 10029.

Listed part numbers: ANCHOR 10029, ACKOJA A529670 and DEA / MARMON RIDE CONTROL A71125, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2020 Hyundai Veloster come from ANCHOR.

Listed part numbers: ANCHOR 300735 and ANCHOR 300736.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

111 Oil parts for the 2020 Hyundai Veloster come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 63 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2020 Hyundai Veloster come from 2 brands — STANDARD MOTOR PRODUCTS and AUTOTECNICA.

Part numbers include AUTOTECNICA HY1421718, STANDARD MOTOR PRODUCTS OCK29 and STANDARD MOTOR PRODUCTS OCK106.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2020 Hyundai Veloster come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2020 Hyundai Veloster, from DORMAN, FEL-PRO and ULTRA-POWER.

Listed part numbers: DORMAN 095147, DORMAN 995147CD and FEL-PRO 73346, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2020 Hyundai Veloster come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Part numbers include CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2020 Hyundai Veloster come from 14 brands — BOSCH, VARIOUS MFR, WIX and 11 other brands. The "Popular" part is WIX 51334XP.

The Economy section lists 5 options from BOSCH, FRAM, FVP and 2 other brands — the catalog's value-priced group. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

In the Standard Replacement grade, ACDELCO, BOSCH, DENSO and 7 other brands supply 11 parts: built to original-equipment specification. A representative part number is BOSCH 3312.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2020 Hyundai Veloster, from DORMAN, SKP and SPECTRA PREMIUM.

Listed part numbers: DORMAN 264276, SKP SKHYP32A and SPECTRA PREMIUM HYP32A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2020 Hyundai Veloster come from 2 brands — MELLING and TOPLINE.

Part numbers include MELLING M574 and TOPLINE OPHY23VK.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2020 Hyundai Veloster — TOPLINE PAHY23V.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts for the 2020 Hyundai Veloster come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH EB0284 and TOPLINE PBHY23.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts are listed for the 2020 Hyundai Veloster, from ENGINETECH and TOPLINE.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH C31894 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE RSHY23 is listed in this group.

Part numbers include ENGINETECH C31894 and TOPLINE RSHY23.

This table covers the Thrust washers. Read more

This group shows a single part: ENGINETECH TW1121.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2020 Hyundai Veloster, from CLOYES, HYUNDAI, MELLING and 1 other brand.

Listed part numbers: CLOYES C515, HYUNDAI 243212E010 and MELLING 515, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts for the 2020 Hyundai Veloster come from 4 brands — S.A. GEAR, CLOYES, ENGINETECH and 1 other brand. The "Popular" part is CLOYES 90515SAX.

The Economy section: 2 options from S.A. GEAR. S.A. GEAR 76307S is listed in this group.

Standard Replacement: 3 parts, from CLOYES, ENGINETECH and MELLING. A representative part number is CLOYES 90515SAX.

This group includes CLOYES 90515SAX, S.A. GEAR 76307S and S.A. GEAR 76307SV and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts are listed for the 2020 Hyundai Veloster, from PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 1 other brand. S.A. GEAR 91191 carries the "Popular" badge.

Part numbers include S.A. GEAR 91191, S.A. GEAR 71141 and CLOYES 95760, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts for the 2020 Hyundai Veloster come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

Part numbers include CLOYES 95759, MELLING BT5759 and PREFERRED COMPONENTS INC T66175, among others listed above.

This table covers the Timing covers. Read more

3 Timing Cover parts are listed for the 2020 Hyundai Veloster, from ACKOJA, HYUNDAI and TOPLINE.

Part numbers include ACKOJA A520552, HYUNDAI 213502E740 and TOPLINE TCHY23V.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 68021.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2020 Hyundai Veloster, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10136, DEA / MARMON RIDE CONTROL A71100 and PIONEER 630136, among others listed above.

This table covers the Valve covers. Read more

2 Valve Cover parts are listed for the 2020 Hyundai Veloster, from ACKOJA and APEX.

Part numbers include ACKOJA A529682 and APEX VCS1427.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 2020 Hyundai Veloster come from 3 brands — APEX, BECK/ARNLEY and MAHLE / CLEVITE.

Part numbers include APEX AVC1398S, BECK/ARNLEY 0362125 and MAHLE / CLEVITE VS50733.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2020 Hyundai Veloster come from 2 brands — ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH GD1797BR and TOPLINE VGHY11.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts for the 2020 Hyundai Veloster come from 3 brands — ACKOJA, ENGINETECH and TOPLINE.

Part numbers include ACKOJA A520739, ENGINETECH L2312 and TOPLINE LIFHY23.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts are listed for the 2020 Hyundai Veloster, from MELLING and QUALCAST.

Listed part numbers: MELLING VS2511 and QUALCAST 322511.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts are listed for the 2020 Hyundai Veloster, from HYUNDAI, MELLING, QUALCAST and 1 other brand.

Listed part numbers: HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2020 Hyundai Veloster come from 6 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is APEX AVS2085.

This group includes APEX AVS2085, FEL-PRO SS71268 and MAHLE / CLEVITE SS45992 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

21 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2020 Hyundai Veloster come from 11 brands — DORMAN, SKP, ULTRA-POWER and 8 other brands. The "Popular" part is DORMAN 918033.

The Economy section: 12 options from DORMAN, SKP, ULTRA-POWER and 3 other brands. DORMAN 918033 is listed in this group.

Standard Replacement: 9 parts, from BECK/ARNLEY, CLOYES, S.A. GEAR and 2 other brands. A representative part number is BECK/ARNLEY 0242043.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

7 Variable Valve Timing (VVT) Sprocket parts for the 2020 Hyundai Veloster come from 5 brands — STANDARD MOTOR PRODUCTS, S.A. GEAR, SKP and 2 other brands. The "Popular" part is SKP SKVVT718.

The Economy section: 2 options from SKP and AUTOTECNICA. SKP SKVVT718 is listed in this group.

Standard Replacement: 5 parts, from STANDARD MOTOR PRODUCTS, S.A. GEAR and HYUNDAI. A representative part number is STANDARD MOTOR PRODUCTS VVT689.

This group includes SKP SKVVT718, AUTOTECNICA HY1422671 and STANDARD MOTOR PRODUCTS VVT689 and the remaining parts above.