2019 Hyundai Veloster Engine Parts

This table covers the Balance shafts. Read more

This group shows a single part: HYUNDAI 233002GGC0.

This table covers the camshafts that open the valves. Read more

One part is listed for the 2019 Hyundai Veloster — HYUNDAI 241002GTB0.

This table covers the connecting rods between each piston and the crankshaft. Read more

TOPLINE supplies both parts for the 2019 Hyundai Veloster.

Part numbers include TOPLINE CRHY22T and TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2019 Hyundai Veloster, from TOPLINE and ENGINETECH.

This group includes ENGINETECH BB1100, ENGINETECH BB1041 and TOPLINE RBHY22T and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts are listed for the 2019 Hyundai Veloster, from TOPLINE, AJUSA, FEL-PRO and 4 other brands. AJUSA 54244600 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies both parts for the 2019 Hyundai Veloster.

Part numbers include TOPLINE CSHY22T and TOPLINE CSHY23S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 2019 Hyundai Veloster come from 3 brands — TOPLINE, ENGINETECH and ITM ENGINE COMPONENTS.

Part numbers include ENGINETECH BC1101, ENGINETECH BC1030 and ITM ENGINE COMPONENTS 5M9386, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2019 Hyundai Veloster come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99157, BCA NS99166 and NATIONAL 99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

40 Crankshaft Seal parts for the 2019 Hyundai Veloster come from 12 brands — VICTOR REINZ, NATIONAL, FEL-PRO and 9 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

13 Cylinder Head Bolt parts are listed for the 2019 Hyundai Veloster, from FEL-PRO, TOPLINE, MAHLE / CLEVITE and 4 other brands. ENGINETECH HB307 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2019 Hyundai Veloster, from MAHLE / CLEVITE, APEX, AJUSA and 3 other brands.

This group includes AJUSA 10239000, APEX AHG1326 and APEX AHG1427 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts are listed for the 2019 Hyundai Veloster, from MAHLE / CLEVITE, TOPLINE, AJUSA and 2 other brands.

This group includes AJUSA 52573300, ENGINETECH HY20HSG and HYUNDAI 209202BU06 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2019 Hyundai Veloster come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2019 Hyundai Veloster, from TOPLINE and AJUSA.

This group includes AJUSA 50525000, TOPLINE CGSHY22ST and TOPLINE CGSHY23N and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2019 Hyundai Veloster come from 4 brands — TOPLINE, MELLING, ENGINETECH and 1 other brand.

Part numbers include ENGINETECH EM4435, HYUNDAI 222122E000 and MELLING V5571, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

11 Harmonic Balancer parts are listed for the 2019 Hyundai Veloster, from HYUNDAI, ATP, DAYCO and 2 other brands. HYUNDAI 231242E000 carries the "Popular" badge.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2019 Hyundai Veloster, from FEL-PRO, AJUSA, APEX and 3 other brands. FEL-PRO MS97228 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97228, AJUSA 13275000 and APEX AMS13140, plus the other parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2019 Hyundai Veloster — STANDARD MOTOR PRODUCTS IMRC23.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

13 Intake Valve parts for the 2019 Hyundai Veloster come from 7 brands — MELLING, TOPLINE, ENGINETECH and 4 other brands. The "Popular" part is MELLING V3255.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2019 Hyundai Veloster come from 5 brands — ANCHOR, ACKOJA, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 10029. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ANCHOR 10029, ACKOJA A529670 and DEA / MARMON RIDE CONTROL A71125, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2019 Hyundai Veloster come from ANCHOR. 1 part fits every engine; the other 1 is engine-specific.

This group includes ANCHOR 300735 and ANCHOR 300736.