2017 Hyundai Tucson Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts are listed for the 2017 Hyundai Tucson, from HYUNDAI and SKP.

Part numbers include HYUNDAI 241002E000 and SKP SKES1562.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 293946.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts are listed for the 2017 Hyundai Tucson, from TOPLINE and HYUNDAI.

This group includes HYUNDAI 235102E001, TOPLINE CRHY22T and TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 2017 Hyundai Tucson, from KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4634XP.

The Standard Replacement section lists 2 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR4668SM is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts are listed for the 2017 Hyundai Tucson, from AJUSA, APEX, ENGINETECH and 4 other brands. AJUSA 54244600 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies both parts for the 2017 Hyundai Tucson.

Listed part numbers: TOPLINE CSHY22T and TOPLINE CSHY23R.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Crankshaft Main Bearing parts for the 2017 Hyundai Tucson come from 5 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BC1017.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5771XP is listed in this group.

Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5707SI.

10 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2017 Hyundai Tucson come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

This group includes BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99103 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

37 Crankshaft Seal parts for the 2017 Hyundai Tucson come from 12 brands — ELRING, VICTOR REINZ, FEL-PRO and 9 other brands. The "Popular" part is ACDELCO 224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 2017 Hyundai Tucson, from AJUSA, ENGINETECH, FEL-PRO and 3 other brands. AJUSA 81061400 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 2017 Hyundai Tucson, from ELRING, APEX, AJUSA and 3 other brands. APEX AHG1326 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 2017 Hyundai Tucson, from ELRING, ENGINETECH, AJUSA and 3 other brands. ELRING 925610 carries the "Popular" badge.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2017 Hyundai Tucson, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2017 Tucson.

Part numbers include TECHPRO HY1228189 and TECHPRO HY1228190, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2017 Hyundai Tucson, from AJUSA, ELRING and TOPLINE.

Part numbers include AJUSA 50485000, AJUSA 50523200 and ELRING 925630, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2017 Hyundai Tucson come from 3 brands — TOPLINE, HYUNDAI and MELLING.

Listed part numbers: HYUNDAI 222122E000, MELLING V5571 and TOPLINE EVHY22, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2017 Hyundai Tucson, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS GDF401 and WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

9 Harmonic Balancer parts are listed for the 2017 Hyundai Tucson, from HYUNDAI, ATP, DAYCO and 2 other brands. HYUNDAI 231242E000 carries the "Popular" badge.

Part numbers include HYUNDAI 231242E000, ACKOJA A520605 and ATP 102474, among others listed above.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MARELLI PHP1009.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2017 Hyundai Tucson — STANDARD MOTOR PRODUCTS IMA146.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts are listed for the 2017 Hyundai Tucson, from ELRING, AJUSA, MAHLE / CLEVITE and 4 other brands. AJUSA 13276100 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 853640.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Intake Valve parts for the 2017 Hyundai Tucson come from 5 brands — MELLING, ENGINETECH, HYUNDAI and 2 other brands. The "Popular" part is MELLING V5564.

Part numbers include MELLING V5564, ENGINETECH V2200 and ENGINETECH V1794, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2017 Hyundai Tucson come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10058, DEA / MARMON RIDE CONTROL A71211 and PIONEER 610058, among others listed above.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2017 Hyundai Tucson come from ANCHOR.

Listed part numbers: ANCHOR 300466, ANCHOR 300878 and ANCHOR 300465.